Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.757 kg |
| Material | Cast Steel |
| Number of grooves | 5 |
| Number of Wings | 7 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£77.01
Important compatibility info
| Additional Information 2 | with dryer |
| Refrigerant | R 134a |
| Weight | 2.004 kg |
| Type | Condenser, air conditioning |
| Function | Condenser, air conditioning |
| Core Length | 374 mm |
| Core Width | 583 mm |
| Core Depth | 16 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£77.01
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Thread Size | M27x1,5 |
| Bolt Hole Circle Diameter | 94 mm |
| Bore Diameter | 10.5 mm |
| External Teeth, Wheel Side | 30 |
| Weight | 7.630 kg |
| Number of mounting bores | 6 |
| Min. Length | 651 mm |
| Wheel Sided Joint Diameter | 94 mm |
| Transmission-side joint diameter | 108 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£77.01
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size | 22 mm |
| Additional Information | with rubber mounts, with lock nut |
| Paired article numbers | 181051 |
| Weight | 7.051 kg |
| External Thread Size | M16 x 1,5 |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£77.01
Important compatibility info
| Weight | 7.253 kg |
| Rod/Strut | Push Rod |
| Outer diameter | 53 mm |
| Length | 846 mm |
| Cone Size | 26 mm |
| Pipe Diameter | 48 mm |
| Function | Centre Rod Assembly |
| Driver Position | for right-hand drive vehicles |
| Internal Thread Size | M30 x 1,5 RHT |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| External Thread Size | M20 x 1,5 |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£77.01
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 9 |
| Rated Power | 1.1 kW |
| Weight | 3.4 kg |
| for OE number | 036 911 023 SX |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£77.01
Important compatibility info
| Weight | 7.58 kg |
| Function | Centre Rod Assembly |
| Cone Size | 26 mm |
| Pipe Diameter | 40 mm |
| Rod/Strut | Push Rod |
| Length | 940 mm |
| Placement on Vehicle | Front Axle |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| External Thread Size | M20 x 1,5 |
| Internal Thread Size | M30 x 1,5 RHT |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£77.01
Important compatibility info
| Weight | 6.652 kg |
| Additional Information | with rubber mounts |
| Material | Sheet Steel |
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 182166 |
| Steering arm type | Control Arm |
| Additional Information 2 | without ball joint |
| Cone Size | 26 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size 1 | 21 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£77.01
Important compatibility info
| Weight | 1.01 kg |
| Additional Information | with gaskets/seals |
| Number of Connectors / Ports | 2 |
| Type | EGR Valve |
| Function | EGR Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£77.01
Important compatibility info
| Material | Rubber/Metal |
| Outer diameter | 134 mm |
| Thickness | 32 mm |
| Inner diameter | 37 mm |
| Bolt Hole Circle Diameter | 70 mm |
| Surface | Painted |
| Function | Vibration Damper, propshaft |
| Weight | 1.58 kg |
| Type | Vibration Damper, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£77.01
Important compatibility info
| Type | Drive Shaft |
| Transmission-side joint diameter | 101.5 mm |
| Wheel Sided Joint Diameter | 98 mm |
| External Teeth, Diff.Side | 26 |
| Min. Length | 860 mm |
| Function | Drive Shaft |
| Weight | 10.004 kg |
| External Teeth, Wheel Side | 38 |
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M20x1,5 |
| Paired article numbers | 182112 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£77.01
Important compatibility info
| Weight | 0.566 kg |
| Width of castor bearing surface | 29 mm |
| Material | Metal |
| Outer diameter | 80 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£77.01
Important compatibility info
| Weight | 9.66 kg |
| Length | 915 mm |
| Material | Steel |
| Function | Centre Rod Assembly |
| Pipe Diameter | 40 mm. 50 mm |
| Cone Size | 30 mm |
| Thickness | 118 mm |
| Spanner Size | 36 |
| Rod/Strut | Push Rod |
| Colour | Black |
| Driver Position | for right-hand drive vehicles |
| Thread Length | 27.2 mm. 80 mm |
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 RHT |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£77.01
Important compatibility info
| External Thread Size | M24 x 1,5 |
| Rod/Strut | Push Rod |
| Placement on Vehicle | Front Axle |
| Length | 878 mm |
| Pipe Diameter | 36 mm |
| Function | Centre Rod Assembly |
| Cone Size | 30 mm |
| Internal Thread Size | M30 x 1,5 RHT |
| Driver Position | for left-hand/right-hand drive vehicles |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Weight | 5.730 kg |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£77.01
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with screw |
| Thread Size | M10x1,5 |
| External Teeth, Wheel Side | 36 |
| Weight | 5.489 kg |
| External Teeth, Diff.Side | 26 |
| Min. Length | 581 mm |
| Wheel Sided Joint Diameter | 82.4 mm |
| Transmission-side joint diameter | 82 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£77.01
Important compatibility info
| for OE number | C2Z 29118 |
| Weight | 1.130 kg |
| Additional Information 2 | with lid |
| Additional Information | with coolant level sensor |
| Type | Expansion Tank, coolant |
| Function | Expansion Tank, coolant |
| Material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£77.01
Important compatibility info
| Weight | 10.700 kg |
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 26454 |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size | 22 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with rubber mount, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£77.01
Important compatibility info
| Number of Connectors / Ports | 3 |
| Voltage | 24 V |
| Type | Solenoid Valve |
| Weight | 0.427 kg |
| Function | Solenoid Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£77.01
Important compatibility info
| Length | 825 mm |
| Outer diameter | 52 mm |
| Rod/Strut | Guide Rod |
| Cone Size | 30 mm |
| Pipe Diameter | 52 mm |
| Function | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
| Driver Position | for left-hand/right-hand drive vehicles |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Weight | 9.34 kg |
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 RHT |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£77.01
Important compatibility info
| Inner length 2 | 900 mm |
| Inner length 1 | 850 mm |
| Weight | 0.896 kg |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Outer length 1 | 1117 mm |
| Outer length 2 | 1221 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£77.01
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023