Proud to be a UK-based company
Contact us
Important compatibility info
| Filter type | High efficiency air filter (HEPA) |
| Function | Filter Set, cabin air |
| Type | Filter Set, cabin air |
| Weight | 0.720 kg |
| Length | 465 mm |
| Width | 180 mm |
| Height | 30.5 mm |
| Placement on Vehicle | Engine Compartment, Lower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.02
Important compatibility info
| Placement on Vehicle | Right |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Weight | 1.600 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.02
Important compatibility info
| Placement on Vehicle | both sides |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Weight | 1.050 kg |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.00
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information | with Split Pin |
| Additional Information 2 | with nut |
| Thread Size | M24x2,0 |
| External Teeth, Wheel Side | 28 |
| Weight | 9.354 kg |
| External Teeth, Diff.Side | 36 |
| Min. Length | 797 mm |
| ABS Ring Diameter | 105 mm |
| Wheel Sided Joint Diameter | 100 mm |
| Transmission-side joint diameter | 92.2 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.99
Important compatibility info
| Weight | 0.826 kg |
| Extra Description | Basic Short Kit |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 138 |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Timing Chain Size | G53HR |
| Replaces | 38195 |
| Additional Information | with slide rails, with chain tensioner |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (29867)
- 1x Febi Guide, timing chain (29901)
- 1x Febi Guide, timing chain (29902)
- 1x Febi Guide, timing chain (29903)
- 1x Febi Tensioner, timing chain (47638)
£74.99
Important compatibility info
| Weight | 1.7 kg |
| Function | Brake Valve, service brake |
| Type | Brake Valve, service brake |
| Internal Thread Size | M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.99
Important compatibility info
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
| Inner diameter | 36.6 mm |
| Weight | 5.930 kg |
| Outer diameter | 87.5 mm |
| Function | Wheel Bearing Kit |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 78 mm |
| Additional Information | with fastening/mounting material |
| Type | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Bearing Type | Tapered Roller Bearing |
| Outer diameter 1 | 65 mm |
| Outer diameter 2 | 210 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.99
Important compatibility info
| Housing Type | with housing |
| Type | Mass Air Flow Sensor |
| Resistor Type | Hot-wire Sensor |
| Function | Mass Air Flow Sensor |
| Weight | 0.18 kg |
| Number of Connectors / Ports | 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.95
Important compatibility info
| Function | Master Cylinder, clutch |
| Type | Master Cylinder, clutch |
| Weight | 0.196 kg |
| Number of Connectors / Ports | 4 |
| Additional Information 2 | with sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.95
Important compatibility info
| Weight | 1.125 kg |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.93
Important compatibility info
| Weight | 2.008 kg |
| Outer diameter | 144 mm |
| Inner diameter | 30 mm |
| Number of Ribs | 8 |
| Parameter | 4 PK + 4 PK |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
| Width | 151 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.92
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Width | 43 mm |
| Outer diameter | 266 mm |
| Thickness | 73 mm |
| Bolt Hole Circle Diameter | 130 mm |
| Centering Diameter | 85 mm |
| Number of mounting bores | 1 |
| Max.skimmed drum measure | 231 mm |
| Inner Brake Drum Diameter | 230 mm |
| Function | Brake Drum |
| Rim Hole Number | 5 -Hole |
| Weight | 6.5 kg |
| Type | Brake Drum |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.91
Important compatibility info
| Length | 371 mm |
| Material | Steel |
| Outer diameter | 206 mm |
| Number of Connectors / Ports | 4 |
| Weight | 4.8 kg |
| Capacity | 10 l |
| Internal Thread Size | M22 x 1,5 |
| Function | Air Tank, compressed-air system |
| Type | Air Tank, compressed-air system |
| Operating Pressure | 15.5 bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.91
Important compatibility info
| Weight | 0.935 kg |
| Material | Rubber/Metal |
| Bolt Hole Circle Diameter | 90 mm |
| Function | Joint, propshaft |
| Type | Joint, propshaft |
| Outer diameter | 124 mm |
| Thickness | 23 mm |
| Number of Holes | 6 |
| Mounting points diameter | 14 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.89
Important compatibility info
| Placement on Vehicle | Upper |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 74 |
| Timing Chain Size | G67AM, G67HP, G67HR |
| Function | Timing Chain Kit |
| Weight | 0.758 kg |
| Type | Timing Chain Kit |
| Additional Information | with chain tensioner, with slide rails |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (21267)
- 1x Febi Guide, timing chain (24829)
- 1x Febi Guide, timing chain (24830)
- 1x Febi Tensioner, timing chain (21291)
£74.87
Important compatibility info
| Weight | 1.312 kg |
| Bolt Hole Circle Diameter | 90 mm |
| Function | Joint, propshaft |
| Extra Description | ProKit |
| Type | Joint, propshaft |
| Additional Information | with nuts |
| Number of Holes | 6 |
| Additional Information 2 | with bolts/screws, with washers |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (03601)
- 6x Febi Screw (03931)
- 1x Febi Assembly Kit, propshaft joint (22117)
£74.86
Important compatibility info
| Number of Connectors / Ports | 5 |
| Weight | 0.2 kg |
| for OE number | 059 906 461 N |
| Type | Mass Air Flow Sensor |
| Function | Mass Air Flow Sensor |
| Resistor Type | Hot-wire Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.85
Important compatibility info
| Weight | 0.521 kg |
| Type | Cylinder Liner, air compressor |
| Function | Cylinder Liner, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.84
Important compatibility info
| Function | Mounting, manual transmission |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, manual transmission |
| Weight | 1.398 kg |
| Placement on Vehicle | Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.83
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Bore Diameter | 14 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Monotube |
| Shock Absorber Design | Telescopic Shock Absorber |
| Weight | 1.600 kg |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Mounting bores distance | 394 mm |
| Max. Length | 394 mm |
| Min. Length | 274 mm |
| Pipe Diameter | 48 mm. 38 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.82
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Bore Diameter | 12 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Telescopic Shock Absorber |
| Weight | 1.990 kg |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Mounting bores distance | 584 mm |
| Max. Length | 584 mm |
| Min. Length | 357 mm |
| Pipe Diameter | 53 mm. 45 mm |
| Piston conrod diameter | 12.5 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.82
Important compatibility info
| Weight | 1.027 kg |
| Type | Oil Pump |
| Function | Oil Pump |
| Additional Information 2 | with gear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.81
Important compatibility info
| Material | Rubber/Metal |
| Placement on Vehicle | Rear |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Weight | 0.58 kg |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.81
Important compatibility info
| Material | Sheet Steel |
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Lower, Front Axle Right |
| Weight | 4.862 kg |
| Additional Information | with rubber mounts |
| Cone Size | 20 mm |
| Paired article numbers | 179027 |
| Additional Information 2 | with ball joint |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.81
Important compatibility info
| Weight | 0.57 kg |
| Type | EGR Valve |
| Function | EGR Valve |
| Additional Information | with gaskets/seals |
| for OE number | 038 131 501 AQ |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.80
Important compatibility info
| Weight | 0.18 kg |
| Function | Steering Column Switch |
| Combi Switch Function | with light dimmer function, with high beam function, with fog-lamp function, with rear fog light function, with indicator function |
| Number of Connectors / Ports | 10 |
| Type | Steering Column Switch |
Additional Information
Technical Information
This article replaces the former version for vehicles without fog light function and is thereby suitable for both vehicles with and without fog lights.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.80
Important compatibility info
| Function | Sensor, exhaust gas temperature |
| Number of Connectors / Ports | 2 |
| Weight | 0.070 kg |
| for OE number | 2192 598 |
| Cable Length | 700 mm |
| Type | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.80
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with nut |
| Thread Size | M22x1,5 |
| External Teeth, Wheel Side | 26 |
| Weight | 4.944 kg |
| External Teeth, Diff.Side | 33 |
| Min. Length | 592 mm |
| Wheel Sided Joint Diameter | 79 mm |
| Transmission-side joint diameter | 74.2 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Paired article numbers | 183386 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.78
Important compatibility info
| Width of castor bearing surface | 23 mm |
| Outer diameter | 70 mm |
| Material | Metal |
| Function | Belt Tensioner, v-ribbed belt |
| Type | Belt Tensioner, v-ribbed belt |
| Weight | 1.113 kg |
| Operating Mode | Automatic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.75
Important compatibility info
| Rotor Style | Internally Vented |
| Weight | 10.833 kg |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 321 mm |
| Thickness | 59.4 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 28 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.71
Important compatibility info
| Rotor Style | Internally Vented |
| Weight | 11.3 kg |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 308 mm |
| Thickness | 55.4 mm |
| Brake Disc Thickness | 33 mm |
| Minimum thickness | 30 mm |
| Bolt Hole Circle Diameter | 111.5 mm |
| Centering Diameter | 93 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.71
Important compatibility info
| Weight | 3.190 kg |
| Outer diameter | 317 mm |
| Inner diameter | 196 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
| Height | 401 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.70
Important compatibility info
| Weight | 2.237 kg |
| Material | Cast Aluminium |
| Number of Wings | 4 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| for OE number | 103 200 37 01 |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.68
Important compatibility info
| Additional Information | with electric motor |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Type | Brake Caliper |
| Paired article numbers | 188267 |
| Vehicle Equipment | for vehicles with electric parking brake |
| Function | Brake Caliper |
| Brake caliper piston diameter | 41 mm |
| Placement on Vehicle | Rear Axle Left |
| Weight | 2.9 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.63
Important compatibility info
| Function | Mounting, engine |
| Type | Mounting, engine |
| Placement on Vehicle | Right |
| Weight | 1.410 kg |
| for OE number | 11 37 520 39R |
| Bearing/Mounting Type | Hydro Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.62
Important compatibility info
| Height | 139 mm |
| Length | 222 mm |
| Width | 155 mm |
| Weight | 2.372 kg |
| Placement on Vehicle | Lower Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.62
Important compatibility info
| Extra Description | febi Plus |
| Type | Pressure converter, turbocharger |
| Function | Pressure converter, turbocharger |
| Number of Connectors / Ports | 2 |
| Weight | 0.21 kg |
| for OE number | 11 74 7 626 351 |
| Voltage | 12 V |
| Operating Mode | Electric-pneumatic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.60
Important compatibility info
| Outer diameter | 245 mm |
| Material | PTFE (polytetrafluoroethylene) |
| Thickness | 34.5 mm |
| Function | Shaft Seal, automatic transmission |
| Weight | 0.2 kg |
| Inner diameter | 48 mm |
| Type | Shaft Seal, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.58
Important compatibility info
| Width | 18 mm |
| Outer diameter | 424 mm |
| Inner diameter | 380 mm |
| Number of Teeth | 132 |
| Weight | 3.336 kg |
| Type | Ring Gear, flywheel |
| Function | Ring Gear, flywheel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.57
Important compatibility info
| Height | 125 mm |
| Outer diameter | 94 mm |
| Function | Water Separator, fuel system |
| Weight | 0.285 kg |
| Type | Water Separator, fuel system |
| External Thread Size | M80 x 2,5 |
| Additional Information 2 | with sensor |
| Additional Information | with solenoid valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.57
Important compatibility info
| Weight | 2.9 kg |
| Outer diameter | 160 mm |
| Thickness | 260 mm. 75 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| External Thread Size | M8 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.56
Important compatibility info
| Width | 20 mm |
| Number of Teeth | 91 |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
| Surface | PTFE (Polytetrafluorethylene) coated |
| Weight | 1.623 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Water Pump, engine cooling (19644)
- 1x Febi Timing Belt Kit (26117)
£74.52
Important compatibility info
| Weight | 7.1 kg |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 305 mm |
| Thickness | 67.9 mm |
| Brake Disc Thickness | 19.8 mm |
| Minimum thickness | 18.5 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 74 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.52
Important compatibility info
| Rim Hole Number | 8 -Hole |
| Weight | 7.435 kg |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 345 mm |
| Thickness | 76.5 mm |
| Brake Disc Thickness | 18 mm |
| Minimum thickness | 16.5 mm |
| Bolt Hole Circle Diameter | 150 mm |
| Centering Diameter | 112 mm |
| Surface | Coated |
| Number of mounting bores | 5 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Inner diameter | 240 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.43
Important compatibility info
| Type | Master Cylinder, clutch |
| Fill Medium | Brake Fluid |
| Bore Diameter | 26 mm |
| Weight | 0.358 kg |
| Function | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.41
Important compatibility info
| Inner diameter | 22 mm |
| Function | Oil Cooler, engine oil |
| Weight | 0.490 kg |
| Type | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.40
Important compatibility info
| Outer diameter | 160 mm |
| Bolt Hole Circle Diameter | 110 mm |
| Weight | 0.9 kg |
| Function | Joint, propshaft |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.38
Important compatibility info
| Weight | 0.3 kg |
| Type | Divert-air Valve, charger |
| Function | Divert-air Valve, charger |
| Extra Description | febi Plus |
| for OE number | 06H 145 710 J |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.37
Important compatibility info
| Type | Gasket Set, oil cooler |
| Material | Rubber/Metal, NBR (nitrile butadiene rubber) |
| Weight | 0.098 kg |
| Function | Gasket Set, oil cooler |
| for OE number | 2 096 561 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Gasket, oil cooler (107788)
- 2x Febi Seal Ring, oil cooler (lubrication) (45524)
- 2x Febi Seal Ring, oil cooler (lubrication) (45523)
£74.37
Important compatibility info
| Function | Mounting, engine |
| Weight | 0.850 kg |
| External Thread Size | M10 x 1,5 |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Additional Information 2 | with splash protection cover |
| for OE number | 253 240 09 00 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.36
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023