Proud to be a UK-based company
Contact us
Important compatibility info
| Paired article numbers | 180217 |
| Placement on Vehicle | Left Front |
| Number of Connectors / Ports | 6 |
| Function | Electric Motor, window regulator |
| Weight | 0.6 kg |
| Type | Electric Motor, window regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.20
Important compatibility info
| Placement on Vehicle | both sides |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| External Thread Size | M10 x 1,5 |
| Weight | 2.58 kg |
| Type | Mounting, engine |
| Additional Information 2 | with splash protection cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.16
Important compatibility info
| Wheel Sided Joint Diameter | 91 mm |
| External Teeth, Diff.Side | 24 |
| Weight | 7.952 kg |
| Min. Length | 951 mm |
| Transmission-side joint diameter | 79 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| External Teeth, Wheel Side | 28 |
| Paired article numbers | 182966 |
| Thread Size | M24x1,5 |
| Additional Information 2 | with nut |
| Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.14
Important compatibility info
| Function | Mass Air Flow Sensor |
| Resistor Type | Hot-wire Sensor |
| Type | Mass Air Flow Sensor |
| Housing Type | without housing |
| Weight | 0.04 kg |
| Number of Connectors / Ports | 4 |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.14
Important compatibility info
| Weight | 1.5 kg |
| Placement on Vehicle | Front Axle |
| Width | 75 mm |
| Outer diameter | 127 mm |
| Inner diameter | 30 mm |
| Number of Holes | 5 |
| Bolt Hole Circle Diameter | 100 mm |
| Function | Wheel Hub |
| Type | Wheel Hub |
| Additional Information 2 | with ABS sensor ring, without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.14
Important compatibility info
| Material | Cast Aluminium |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 182953 |
| Weight | 1.57 kg |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 38 mm |
| Placement on Vehicle | Rear Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.13
Important compatibility info
| Weight | 7.5 kg |
| Function | Air Tank, compressed-air system |
| Length | 496.5 mm |
| Material | Steel |
| Outer diameter | 246 mm |
| Capacity | 20 l |
| Operating Pressure | 15.5 bar |
| Internal Thread Size | M22 x 1,5 |
| Type | Air Tank, compressed-air system |
| Number of Connectors / Ports | 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.12
Important compatibility info
| Weight | 2.212 kg |
| Thickness | 126 mm |
| Paired article numbers | 107736 |
| Function | Mounting Bracket, shock absorber mounting (driver cab) |
| Material | Rubber/Metal |
| Width | 68 mm |
| Length | 114 mm |
| Placement on Vehicle | Right |
| Type | Mounting Bracket, shock absorber mounting (driver cab) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.11
Important compatibility info
| Placement on Vehicle | Left |
| Length | 114 mm |
| Width | 68 mm |
| Material | Rubber/Metal |
| Thickness | 126 mm |
| Paired article numbers | 107737 |
| Function | Mounting Bracket, shock absorber mounting (driver cab) |
| Weight | 2.212 kg |
| Type | Mounting Bracket, shock absorber mounting (driver cab) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.11
Important compatibility info
| Weight | 9.72 kg |
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 304 mm |
| Thickness | 48 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 71 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.11
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Thread Size | M24x1,5 |
| External Teeth, Wheel Side | 25 |
| Weight | 5.931 kg |
| External Teeth, Diff.Side | 22 |
| Min. Length | 852 mm |
| Wheel Sided Joint Diameter | 80.4 mm |
| Transmission-side joint diameter | 75.5 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.09
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 317 mm |
| Thickness | 62 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 27 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 79 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Weight | 10.0 kg |
| Rotor Style | Internally Vented |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.07
Important compatibility info
| Placement on Vehicle | Lower, Front, Rear Axle Left, Rear Axle Right |
| Material | Steel |
| Additional Information 2 | with bearing |
| Steering arm type | Control Arm |
| Weight | 0.946 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.07
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Type | Brake Caliper |
| Weight | 2.9 kg |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Material | Cast Iron |
| Additional Information | with electric motor |
| Paired article numbers | 184698 |
| Vehicle Equipment | for vehicles with electric parking brake |
| Function | Brake Caliper |
| Brake caliper piston diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.06
Important compatibility info
| Core Depth | 40 mm |
| Core Width | 209 mm |
| Core Length | 130 mm |
| Function | Heat Exchanger, interior heating |
| Weight | 0.637 kg |
| Type | Heat Exchanger, interior heating |
| Additional Information | with gasket/seal, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Material | ACM (Polyacrylate), Rubber/Metal |
| Function | Gasket Set, cylinder head cover |
| Weight | 0.176 kg |
| Type | Gasket Set, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Inner diameter | 30 mm |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Width | 44 mm |
| Outer diameter | 127 mm |
| Function | Belt Pulley, crankshaft |
| Extra Description | ProKit |
| Type | Belt Pulley, crankshaft |
| Weight | 1.65 kg |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (31102)
- 1x Febi Pulley Bolt (33675)
£73.05
Important compatibility info
| Weight | 2.141 kg |
| Placement on Vehicle | Front Axle Left, Rear |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 43758 |
| Inner diameter 2 | 14 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Inner diameter 1 | 14 mm |
| External Thread Size | M16 x 1,5 |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with bearing, with ball joint |
| Cone Size | 19 mm |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (43755)
- 1x Febi Nut (39976)
£73.05
Important compatibility info
| Number of Chain Links | 116 |
| Timing Chain Size | G68HING, G68HP |
| Type | Timing Chain |
| Function | Timing Chain |
| Weight | 0.637 kg |
| Chain Type | Simplex, Closed chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Weight | 4.74 kg |
| Inner diameter | 50 mm |
| Bearing Type | Tapered Roller Bearing |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 47 mm |
| Outer diameter | 88 mm |
| Additional Information | with axle nut |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (173383)
£73.05
Important compatibility info
| Function | Oil Pump |
| Type | Oil Pump |
| Weight | 1.09 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Cone Size | 30 mm |
| Pipe Diameter | 40 mm |
| Rod/Strut | Push Rod |
| Placement on Vehicle | Front Axle |
| Length | 1197 mm |
| Weight | 8.4 kg |
| Function | Centre Rod Assembly |
| External Thread Size | M20 x 1,5 |
| Internal Thread Size | M30 x 1,5 RHT |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 93 mm. 150 mm |
| Outer diameter | 136 mm |
| Inner diameter | 31 mm |
| Bolt Hole Circle Diameter | 104 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Weight | 3.7 kg |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 8 |
| Rated Power | 0.9 kW |
| Weight | 3.06 kg |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Weight | 4.021 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 51 mm |
| Outer diameter | 98 mm |
| Inner diameter | 50 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Weight | 0.302 kg |
| Additional Information | with gasket/seal |
| Type | Control Valve, camshaft adjustment |
| Extra Description | febi Plus |
| Function | Control Valve, camshaft adjustment |
| Placement on Vehicle | Intake Side |
| Paired article numbers | 175384 |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Function | Mounting, engine |
| Paired article numbers | 180772 |
| Placement on Vehicle | Left |
| Weight | 2.12 kg |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Housing length | 152 mm |
| Mounting points diameter | 19 mm |
| Weight | 0.61 kg |
| Placement on Vehicle | Left Rear |
| Length | 253 mm |
| Eject Force | 1900 N |
| Stroke | 67 mm |
| Housing Diameter | 35 mm |
| Piston conrod diameter | 10 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Core Length | 245 mm |
| Core Depth | 26 mm |
| Weight | 0.48 kg |
| Type | Heat Exchanger, interior heating |
| Function | Heat Exchanger, interior heating |
| Core Width | 135 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Number of Connectors / Ports | 5 |
| Weight | 0.04 kg |
| Type | Shift Selector Lever |
| Function | Shift Selector Lever |
| Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Placement on Vehicle | Rear Axle, Front Axle |
| Outer diameter | 152 mm |
| Thickness | 89 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Weight | 2.18 kg |
| Function | Wheel Hub |
| Type | Wheel Hub |
| Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| External Thread Size | M16 x 1,5 |
| Weight | 2.141 kg |
| Placement on Vehicle | Front Axle Right, Rear |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 43757 |
| Inner diameter 1 | 14 mm |
| Inner diameter 2 | 14 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with bearing |
| Additional Information | with lock nut |
| Cone Size | 19 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (43756)
- 1x Febi Nut (39976)
£73.05
Important compatibility info
| Weight | 5.554 kg |
| Width | 63 mm |
| Outer diameter | 164 mm |
| Additional Information 2 | with integrated magnetic sensor ring, Wheel Bearing integrated into wheel hub, with ABS sensor ring |
| Inner diameter | 35 mm |
| Bolt Hole Circle Diameter | 126 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Extra Description | febi Plus |
| Additional Information | with adjuster |
| Weight | 0.671 kg |
| Function | Door Lock |
| Paired article numbers | 179897 |
| Type | Door Lock |
| Number of Connectors / Ports | 9 |
| Placement on Vehicle | Right Front |
| Operating Mode | Electric |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Weight | 0.236 kg |
| Length | 137 mm |
| Width | 71 mm |
| Number of Connectors / Ports | 2 |
| Function | Gear Lever Knob |
| Type | Gear Lever Knob |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Seal Material | Paper |
| Water pump impeller material | Grey Cast Iron |
| Number of Wings | 10 |
| Weight | 1.2 kg |
| Additional Information | with gasket/seal |
| Material | Grey Cast Iron |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Mounting points diameter | 18 mm |
| Stroke | 206 mm |
| Weight | 0.2 kg |
| Eject Force | 1500 N |
| Length | 755 mm |
| Placement on Vehicle | Left Rear |
| Function | Gas Spring, boot/cargo area |
| Housing length | 518 mm |
| Housing Diameter | 18 mm |
| Piston conrod diameter | 10 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Function | Multi-circuit Protection Valve |
| Weight | 0.84 kg |
| Internal Thread Size | M22 x 1,5, M16 x 1,5 |
| Type | Multi-circuit Protection Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Function | Timing Chain |
| Number of Chain Links | 148 |
| Weight | 0.434 kg |
| Chain Type | Simplex, Closed chain |
| Timing Chain Size | G53RING-1, G53RING-2 |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Width | 50 mm |
| Additional Information | with fastening/mounting material |
| Placement on Vehicle | Front Axle |
| Outer diameter | 92 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with ABS sensor ring |
| Inner diameter | 30 mm |
| Weight | 4.227 kg |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Replaces | 40651 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Width | 24 mm |
| Number of Teeth | 181 |
| Weight | 0.247 kg |
| Type | Timing Belt |
| Function | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Placement on Vehicle | Front |
| Operating Mode | Mechanical |
| Paired article numbers | 107684 |
| Weight | 2.0 kg |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 259 mm |
| Min. Length | 226 mm |
| Pipe Diameter | 40 mm. 46 mm |
| Mounting points diameter | 12 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Function | Idle Control Valve, air supply |
| Weight | 0.08 kg |
| Operating Mode | Electric |
| Number of Connectors / Ports | 4 |
| Type | Idle Control Valve, air supply |
| Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Additional Information 2 | with lid |
| Weight | 1.396 kg |
| Function | Expansion Tank, coolant |
| Number of Connectors / Ports | 2 |
| Type | Expansion Tank, coolant |
| Additional Information | with coolant level sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Weight | 2.090 kg |
| for OE number | 81.30550.0082 |
| Type | Clutch Release Bearing |
| Function | Clutch Release Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Weight | 3.7 kg |
| Placement on Vehicle | Front |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 367 mm |
| Min. Length | 203 mm |
| Pipe Diameter | 41 mm |
| Mounting points diameter | 12 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Wear Warning Contact | prepared for wear warning indicator |
| Placement on Vehicle | Rear Axle |
| Width | 92.2 mm |
| Length | 210 mm |
| Additional Information 2 | with fastening material |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 30.2 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Weight | 0.38 kg |
| Function | Shaft Seal, crankshaft |
| Type | Shaft Seal, crankshaft |
| Inner diameter | 100 mm |
| Additional Information 2 | with flange |
| Outer diameter | 250 mm |
| Material | PTFE (polytetrafluoroethylene) |
| Placement on Vehicle | transmission sided |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Units / Pulleys | incl. deflection pulley |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Length | 1075 mm |
| Additional Information 2 | with top |
| Number of Ribs | 6 |
| Weight | 0.991 kg |
| Type | V-Ribbed Belt Set |
| Function | V-Ribbed Belt Set |
| Additional Information | with belt tensioner for V-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (28919)
- 1x Febi Belt Tensioner, v-ribbed belt (49426)
- 1x Febi Deflection/Guide Pulley, v-ribbed belt (14375)
£73.05
Important compatibility info
| Weight | 0.717 kg |
| Placement on Vehicle | Right Rear |
| Length | 313 mm |
| Paired article numbers | 24709 |
| Housing Diameter | 35 mm |
| Eject Force | 1400 N |
| Stroke | 76 mm |
| Mounting points diameter | 15.5 mm |
| Piston conrod diameter | 10 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 192.5 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023