Important compatibility info
Units / Pulleys | incl. deflection pulley |
Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Length | 1075 mm |
Additional Information 2 | with top |
Number of Ribs | 6 |
Weight | 0.991 kg |
Type | V-Ribbed Belt Set |
Function | V-Ribbed Belt Set |
Additional Information | with belt tensioner for V-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (28919)
- 1x Febi Belt Tensioner, v-ribbed belt (49426)
- 1x Febi Deflection/Guide Pulley, v-ribbed belt (14375)
Important compatibility info
Material | ACM (Polyacrylate), Rubber/Metal |
Function | Gasket Set, cylinder head cover |
Weight | 0.176 kg |
Type | Gasket Set, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 81.30550.0054 |
Type | Clutch Release Bearing |
Function | Clutch Release Bearing |
Weight | 2.096 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Replaces | 100952 |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Width | 57 mm |
Outer diameter | 78 mm |
Additional Information 2 | with ABS sensor ring |
Inner diameter | 46 mm |
Weight | 1.470 kg |
Bearing Type | Tapered Roller Bearing |
Type | Wheel Bearing Kit |
Sealing lip material | NBR (nitrile butadiene rubber) |
Function | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.427 kg |
Function | Timing Chain |
Timing Chain Size | Z67 |
Number of Chain Links | 180 |
Chain Type | Silent Chain, Closed chain |
Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Operating Mode | Electric |
Paired article numbers | 106071 |
Placement on Vehicle | Right Front |
Function | Window Regulator |
Weight | 1.5 kg |
Type | Window Regulator |
Additional Information | with electric motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.190 kg |
Fill Medium | Brake Fluid |
Type | Master Cylinder, clutch |
Function | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Brake Disc |
Minimum thickness | 28 mm |
Bolt Hole Circle Diameter | 154 mm |
Surface | Coated |
Inner diameter | 132 mm |
Brake Disc Thickness | 30.2 mm |
Brake Disc Type | Internally Vented |
Thickness | 90 mm |
Placement on Vehicle | Front Axle |
Outer diameter | 322 mm |
Weight | 14.0 kg |
Rim Hole Number | 8 -Hole |
Internal Thread Size | M14 x 2 |
Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Width | 136 mm |
Additional Information | with fastening/mounting material |
Outer diameter | 136 mm |
Additional Information 2 | with integrated magnetic sensor ring, Wheel Bearing integrated into wheel hub, with ABS sensor ring |
Inner diameter | 37 mm |
Bolt Hole Circle Diameter | 108 mm |
Weight | 2.725 kg |
Bearing Type | Angular Ball Bearing |
Type | Wheel Bearing Kit |
Function | Wheel Bearing Kit |
Replaces | 31686 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Wiper Motor |
Placement on Vehicle | Rear |
Number of Connectors / Ports | 3 |
Weight | 0.880 kg |
Voltage | 12 V |
Type | Wiper Motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Thermostat, coolant |
Type | Thermostat, coolant |
Weight | 0.21 kg |
Additional Information 2 | with seal ring |
Opening Temperature | 87 °C |
Outer diameter | 73 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 3 |
Weight | 0.320 kg |
for OE number | 22448-4M500 |
Type | Ignition Coil |
Function | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Drive Shaft |
Function | Drive Shaft |
Transmission-side joint diameter | 99.1 mm |
Wheel Sided Joint Diameter | 98 mm |
Placement on Vehicle | Front Axle Right |
Additional Information 2 | with nut |
Thread Size | M33x1,5 |
External Teeth, Wheel Side | 35 |
Weight | 13.172 kg |
Min. Length | 1144 mm |
External Teeth, Diff.Side | 41 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Seal Material | Paper |
Water pump impeller material | Grey Cast Iron |
Number of Wings | 10 |
Weight | 1.2 kg |
Additional Information | with gasket/seal |
Material | Grey Cast Iron |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 24 mm |
Number of Teeth | 181 |
Weight | 0.247 kg |
Type | Timing Belt |
Function | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Shock Absorber, driver cab suspension |
Max. Length | 378 mm |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Weight | 2.4 kg |
Operating Mode | Mechanical |
Placement on Vehicle | Rear |
Type | Shock Absorber, driver cab suspension |
Piston conrod diameter | 16 mm |
Mounting points diameter | 14 mm |
Min. Length | 332 mm |
Pipe Diameter | 58 mm. 63 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Teeth | 8 |
Rated Power | 0.9 kW |
Weight | 3.06 kg |
Type | Starter |
Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle, Left |
Additional Information | with rubber mounts |
Material | Aluminium |
Steering arm type | Control Arm |
Weight | 3.17 kg |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Paired article numbers | 194333 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.35 kg |
Placement on Vehicle | Front Axle Right |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 32071 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint, with rubber mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 50 mm |
Additional Information | with fastening/mounting material |
Placement on Vehicle | Front Axle |
Outer diameter | 92 mm |
Additional Information 2 | Wheel Bearing integrated into wheel hub, with ABS sensor ring |
Inner diameter | 30 mm |
Weight | 4.227 kg |
Bearing Type | Angular Ball Bearing |
Type | Wheel Bearing Kit |
Sealing lip material | NBR (nitrile butadiene rubber) |
Function | Wheel Bearing Kit |
Replaces | 40651 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023