Proud to be a UK-based company
Contact us
Important compatibility info
| Seal Material | Paper |
| Water pump impeller material | Grey Cast Iron |
| Number of Wings | 10 |
| Weight | 1.2 kg |
| Additional Information | with gasket/seal |
| Material | Grey Cast Iron |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
Important compatibility info
| Function | Drive Shaft |
| Transmission-side joint diameter | 99 mm |
| Type | Drive Shaft |
| Wheel Sided Joint Diameter | 98 mm |
| Min. Length | 755 mm |
| External Teeth, Diff.Side | 41 |
| Weight | 9.930 kg |
| External Teeth, Wheel Side | 31 |
| Thread Size | M24x2,0 |
| Additional Information 2 | with nut |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M22x1,5 |
| Function | Drive Shaft |
| Wheel Sided Joint Diameter | 91 mm |
| Transmission-side joint diameter | 81.4 mm |
| Type | Drive Shaft |
| Min. Length | 1017 mm |
| External Teeth, Diff.Side | 39 |
| Weight | 9.022 kg |
| External Teeth, Wheel Side | 27 |
| Paired article numbers | 182856 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
Important compatibility info
| Weight | 0.190 kg |
| Fill Medium | Brake Fluid |
| Type | Master Cylinder, clutch |
| Function | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
Important compatibility info
| Outer diameter | 50 mm. 51 mm |
| Function | Repair Kit, kingpin |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 222.5 mm |
| Additional Information | with Thrust Bearing |
| Weight | 5.06 kg |
| Extra Description | ProKit |
| Type | Repair Kit, kingpin |
| Additional Information 2 | with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Bush, steering knuckle (08524)
- 2x Febi Grease Nipple (01094)
- 2x Febi Circlip (04687)
- 2x Febi Seal Ring, steering knuckle (03727)
- 2x Febi Seal Ring, steering knuckle (18992)
- 1x Febi Kingpin (21386)
- 2x Febi Lock Ring, steering knuckle (19029)
- 1x Febi Spacer, kingpin (19021)
- 1x Febi Spacer, kingpin (19023)
- 1x Febi Spacer, kingpin (19025)
- 1x Febi Spacer, kingpin (19026)
- 1x Febi Spacer, kingpin (19027)
- 4x Febi Spacer, kingpin (19028)
- 1x Febi Bush, kingpin (06014)
£75.03
Important compatibility info
| Weight | 2.510 kg |
| Placement on Vehicle | Rear Axle |
| Width | 38 mm |
| Outer diameter | 203 mm |
| Inspection Tag | ECE R90 Approved |
| Mounting Type | Pre-assembled |
| Function | Brake Shoe Set |
| Piston Diameter | 22.2 mm |
| Type | Brake Shoe Set |
| Additional Information | with wheel brake cylinder, with accessories, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.02
Important compatibility info
| Filter type | High efficiency air filter (HEPA) |
| Function | Filter Set, cabin air |
| Type | Filter Set, cabin air |
| Weight | 0.720 kg |
| Length | 465 mm |
| Width | 180 mm |
| Height | 30.5 mm |
| Placement on Vehicle | Engine Compartment, Lower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.02
Important compatibility info
| Weight | 8.360 kg |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 305 mm |
| Thickness | 44 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 61 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.01
Important compatibility info
| Number of Chain Links | 116 |
| Timing Chain Size | G68HING, G68HP |
| Type | Timing Chain |
| Function | Timing Chain |
| Weight | 0.637 kg |
| Chain Type | Simplex, Closed chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.01
Important compatibility info
| Placement on Vehicle | both sides |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Weight | 1.050 kg |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.00
Important compatibility info
| Weight | 0.826 kg |
| Extra Description | Basic Short Kit |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 138 |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Timing Chain Size | G53HR |
| Replaces | 38195 |
| Additional Information | with slide rails, with chain tensioner |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (29867)
- 1x Febi Guide, timing chain (29901)
- 1x Febi Guide, timing chain (29902)
- 1x Febi Guide, timing chain (29903)
- 1x Febi Tensioner, timing chain (47638)
£74.99
Important compatibility info
| Function | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Placement on Vehicle | Left |
| Weight | 0.600 kg |
| External Thread Size | M10 x 1,5 |
| Type | Mounting, engine |
| for OE number | 22 11 6 856 405 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.99
Important compatibility info
| Type | Master Cylinder, clutch |
| Fill Medium | Brake Fluid |
| Bore Diameter | 26 mm |
| Weight | 0.358 kg |
| Function | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.99
Important compatibility info
| Weight | 1.63 kg |
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| for OE number | 212 240 00 00 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.99
Important compatibility info
| Weight | 0.57 kg |
| Type | EGR Valve |
| Function | EGR Valve |
| Additional Information | with gaskets/seals |
| for OE number | 038 131 501 AQ |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.99
Important compatibility info
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
| Inner diameter | 36.6 mm |
| Weight | 5.930 kg |
| Outer diameter | 87.5 mm |
| Function | Wheel Bearing Kit |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 78 mm |
| Additional Information | with fastening/mounting material |
| Type | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Bearing Type | Tapered Roller Bearing |
| Outer diameter 1 | 65 mm |
| Outer diameter 2 | 210 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.99
Important compatibility info
| Weight | 0.597 kg |
| Material | Aluminium |
| Function | Brake Master Cylinder |
| Type | Brake Master Cylinder |
| Piston Diameter | 23.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.99
Important compatibility info
| Weight | 8.9 kg |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 300 mm |
| Thickness | 51 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26.5 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 63.6 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.98
Important compatibility info
| Function | Master Cylinder, clutch |
| Type | Master Cylinder, clutch |
| Weight | 0.196 kg |
| Number of Connectors / Ports | 4 |
| Additional Information 2 | with sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.95
Important compatibility info
| Housing Type | with housing |
| Type | Mass Air Flow Sensor |
| Resistor Type | Hot-wire Sensor |
| Function | Mass Air Flow Sensor |
| Weight | 0.18 kg |
| Number of Connectors / Ports | 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.95
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023