Proud to be a UK-based company
Contact us
Important compatibility info
| Chain Type | Silent Chain, Closed chain |
| Additional Information 2 | Requires special tools for mounting |
| Number of Chain Links | 144 |
| Function | Timing Chain |
| Weight | 0.368 kg |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.48
Important compatibility info
| Weight | 10.6 kg |
| Placement on Vehicle | Front Axle, Rear Axle |
| Length | 210 mm |
| Width | 109.2 mm |
| Wear Warning Contact | excl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 30 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Additional Information 2 | with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.48
Important compatibility info
| Function | Clutch Release Bearing |
| Weight | 2.836 kg |
| for OE number | 81.30550.0116 |
| Type | Clutch Release Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.48
Important compatibility info
| Weight | 3.88 kg |
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 30430 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.47
Important compatibility info
| Material | Steel |
| Outer diameter | 276 mm |
| Weight | 7.1 kg |
| Length | 411.5 mm |
| Capacity | 20 l |
| Operating Pressure | 15.5 bar |
| Function | Air Tank, compressed-air system |
| Internal Thread Size | M22 x 1,5 |
| Type | Air Tank, compressed-air system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.47
Important compatibility info
| Function | Clock Spring, airbag |
| Number of Connectors / Ports | 8 |
| Weight | 0.1 kg |
| Type | Clock Spring, airbag |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.46
Important compatibility info
| Weight | 0.413 kg |
| Placement on Vehicle | Upper |
| Surface | Coated |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 86 |
| Timing Chain Size | G53HS-7 |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| for OE number | 11 31 8 570 649 S2 |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (49505)
- 1x Febi Tensioner, timing chain (28718)
- 1x Febi Guide, timing chain (28725)
- 1x Febi Guide, timing chain (28726)
£73.44
Important compatibility info
| Weight | 1.06 kg |
| Width of castor bearing surface | 26 mm |
| Outer diameter | 60.5 mm. 65 mm |
| Operating Mode | Automatic |
| Type | Belt Tensioner, v-ribbed belt |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.44
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 851 mm |
| Additional Information | with nuts |
| Weight | 6.490 kg |
| Type | Tie Rod |
| Function | Tie Rod |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.44
Important compatibility info
| Brake Disc Thickness | 28 mm |
| Placement on Vehicle | Front Axle |
| Minimum thickness | 26 mm |
| Function | Brake Disc |
| Bolt Hole Circle Diameter | 139.7 mm |
| Centering Diameter | 108 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Outer diameter | 319 mm |
| Thickness | 67.2 mm |
| Rotor Style | Internally Vented |
| Rim Hole Number | 6 -Hole |
| Type | Brake Disc Rotor |
| Weight | 8.450 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.41
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Additional Information | with lock nut |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Material | Aluminium |
| Additional Information 2 | with bearing, with ball joint |
| Placement on Vehicle | Rear, Lower, Front Axle Right |
| Steering arm type | Control Arm |
| Paired article numbers | 179413 |
| Weight | 1.950 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.40
Important compatibility info
| Outer diameter | 280 mm |
| Operating Mode | Electric |
| Number of Connectors / Ports | 2 |
| Rated Power | 150 W |
| Number of Wings | 4 |
| Function | Fan, engine cooling |
| Weight | 1.431 kg |
| Type | Fan, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.40
Important compatibility info
| Additional Information | with lock nut |
| Additional Information 2 | with bearing, with ball joint |
| Placement on Vehicle | Rear, Lower, Front Axle Left |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 179414 |
| External Thread Size | M14 x 1,5 |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 1.950 kg |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.40
Important compatibility info
| Weight | 0.651 kg |
| Width of castor bearing surface | 30 mm |
| Number of Teeth | 116 |
| Belts | with rounded tooth profile |
| Type | Timing Belt Kit |
| Function | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (37290)
- 1x Febi Tensioner Pulley, timing belt (103079)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (26816)
£73.40
Important compatibility info
| Number of Teeth | 129 |
| Function | Water Pump & Timing Belt Kit |
| Manufacturer Restriction | Pierburg |
| Weight | 1.33 kg |
| Type | Water Pump & Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (28664)
- 1x Febi Water Pump, engine cooling (14169)
£73.39
Important compatibility info
| Additional Information 2 | with bolts/screws |
| Width | 30 mm |
| Outer diameter | 143 mm |
| Inner diameter | 30 mm |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Function | Belt Pulley, crankshaft |
| Weight | 2.11 kg |
| Extra Description | ProKit |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (30214)
- 4x Febi Centering Bolt, crankshaft pulley (33554)
£73.38
Important compatibility info
| Weight | 1.04 kg |
| Function | Oil Pump |
| for OE number | 06A 115 105 B |
| Type | Oil Pump |
| Additional Information 2 | with gear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.37
Important compatibility info
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
| Cable Length | 150 mm |
| Weight | 0.044 kg |
| Placement on Vehicle | after catalytic converter |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.36
Important compatibility info
| Weight | 3.37 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 63 mm |
| Outer diameter | 74 mm |
| Number of Connectors / Ports | 2 |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with ABS sensor ring |
| Bolt Hole Circle Diameter | 108 mm |
| Additional Information | with fastening/mounting material |
| Outer diameter 1 | 63 mm |
| Outer diameter 2 | 136 mm |
| Sealing lip material | NBR (nitrile butadiene rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.33
Important compatibility info
| Length | 460 mm |
| Outer diameter | 238 mm. 131 mm |
| Material | CR (chloroprene rubber) |
| Function | Bellow, air suspension |
| Weight | 2.100 kg |
| Type | Bellow, air suspension |
| Additional Information | without piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.33
Important compatibility info
| Placement on Vehicle | Front, both sides |
| Cable Length | 250 mm |
| Number of circuits | 11 |
| Function | Cable Repair Set, door |
| Extra Description | febi Plus |
| Type | Cable Repair Set, door |
| Additional Information 2 | with bellow |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.31
Important compatibility info
| Minimum thickness | 7 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Rim Hole Number | 4 -Hole |
| Centering Diameter | 56 mm |
| Surface | Oiled |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 244 mm |
| Thickness | 69.2 mm |
| Brake Disc Thickness | 9 mm |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Weight | 5.05 kg |
| Rotor Style | Solid |
| Additional Information 2 | with wheel bearing |
| Sensor Type | Impulse Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.31
Important compatibility info
| Placement on Vehicle | Rear |
| Length | 138 mm |
| Thickness | 32 mm |
| Inner diameter | 50 mm |
| Weight | 1.154 kg |
| Type | Joint, propshaft |
| Function | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (101780)
- 3x Febi Screw (21197)
- 3x Febi Screw (109455)
£73.30
Important compatibility info
| Weight | 0.025 kg |
| Number of Connectors / Ports | 10 |
| Function | Steering Angle Sensor |
| Voltage | 12 V |
| Type | Steering Angle Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.29
Important compatibility info
| Weight | 0.043 kg |
| Function | Mass Air Flow Sensor |
| Resistor Type | Hot-film Sensor |
| Number of Connectors / Ports | 4 |
| Type | Mass Air Flow Sensor |
| for OE number | 1 480 570 |
| Housing Type | without housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.29
Important compatibility info
| Weight | 9.6 kg |
| Rolling piston material | Plastic |
| Function | Bellow, air suspension |
| Thickness | 280 mm. 685 mm |
| Outer diameter | 260 mm. 200 mm |
| External Thread Size | M22 x 1,5, M12 x 1,75, M16 x 2 |
| Type | Bellow, air suspension |
| Additional Information | with piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.28
Important compatibility info
| Extra Description | febi Plus |
| Function | Sensor, fuel pressure |
| Type | Sensor, fuel pressure |
| Weight | 0.06 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.27
Important compatibility info
| Max. Length | 511 mm |
| Min. Length | 326 mm |
| Function | Shock Absorber |
| External Thread Size | M16 x 1,5 |
| Weight | 1.260 kg |
| Bore Diameter | 15 mm |
| Shock Absorber Design | Suspension Strut |
| Shock Absorber Mounting Type | Top pin, Bottom Clamp |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Shock Absorber |
| Piston conrod diameter | 28 mm |
| Pipe Diameter | 58 mm |
| Mounting bores distance | 87 mm. 57 mm |
| Shock Absorber Type | Gas Pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.26
Important compatibility info
| Rotor Style | Internally Vented |
| Weight | 7.3 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 300 mm |
| Thickness | 68 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 25.4 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 80 mm |
| Surface | Coated |
| Number of mounting bores | 5 |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.26
Important compatibility info
| Extra Description | febi Plus |
| Function | Tailgate Lock |
| Type | Tailgate Lock |
| Weight | 0.235 kg |
| Additional Information | with adjuster |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.25
Important compatibility info
| Type | Electric Motor, window regulator |
| Function | Electric Motor, window regulator |
| Paired article numbers | 180218 |
| Placement on Vehicle | Right Front |
| Number of Connectors / Ports | 6 |
| Weight | 0.6 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.20
Important compatibility info
| Paired article numbers | 180217 |
| Placement on Vehicle | Left Front |
| Number of Connectors / Ports | 6 |
| Function | Electric Motor, window regulator |
| Weight | 0.6 kg |
| Type | Electric Motor, window regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.20
Important compatibility info
| Weight | 3.71 kg |
| Placement on Vehicle | Rear, both sides |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 328 mm |
| Min. Length | 252 mm |
| Pipe Diameter | 63 mm |
| Mounting points diameter | 14 mm |
| Piston conrod diameter | 12.5 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.17
Important compatibility info
| Weight | 0.271 kg |
| Voltage | 24 V |
| Combi Switch Function | with indicator function, with high beam function, with hazard warning light function |
| for OE number | 70351705 |
| Type | Steering Column Switch |
| Function | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.16
Important compatibility info
| Placement on Vehicle | both sides |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| External Thread Size | M10 x 1,5 |
| Weight | 2.58 kg |
| Type | Mounting, engine |
| Additional Information 2 | with splash protection cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.16
Important compatibility info
| Material | Cast Aluminium |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 182953 |
| Weight | 1.57 kg |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 38 mm |
| Placement on Vehicle | Rear Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.13
Important compatibility info
| Type | Mass Air Flow Sensor |
| Weight | 0.04 kg |
| Number of Connectors / Ports | 4 |
| Function | Mass Air Flow Sensor |
| Resistor Type | Hot-wire Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.13
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber Design | Suspension Strut |
| Weight | 5.210 kg |
| Shock Absorber Mounting Type | Top pin |
| Type | Shock Absorber |
| Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.13
Important compatibility info
| Placement on Vehicle | Left |
| Length | 114 mm |
| Width | 68 mm |
| Material | Rubber/Metal |
| Thickness | 126 mm |
| Paired article numbers | 107737 |
| Function | Mounting Bracket, shock absorber mounting (driver cab) |
| Weight | 2.212 kg |
| Type | Mounting Bracket, shock absorber mounting (driver cab) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.11
Important compatibility info
| Weight | 2.212 kg |
| Thickness | 126 mm |
| Paired article numbers | 107736 |
| Function | Mounting Bracket, shock absorber mounting (driver cab) |
| Material | Rubber/Metal |
| Width | 68 mm |
| Length | 114 mm |
| Placement on Vehicle | Right |
| Type | Mounting Bracket, shock absorber mounting (driver cab) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.11
Important compatibility info
| Weight | 2.8 kg |
| Rated Power | 1.1 kW |
| Function | Starter |
| Type | Starter |
| Voltage | 12 V |
| Number of Teeth | 10 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.10
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Weight | 6.865 kg |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 300 mm |
| Thickness | 45.6 mm. 55 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 19.4 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.10
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Suspension Strut |
| Weight | 5.210 kg |
| Shock Absorber Mounting Type | Top pin, bottom steering knuckle |
| Max. Length | 575 mm |
| Min. Length | 384 mm |
| Pipe Diameter | 58 mm. 57.5 mm |
| Piston conrod diameter | 25 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| External Thread Size | M12 x 1,75 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.10
Important compatibility info
| Rotor Style | Internally Vented |
| Weight | 7.8 kg |
| Rim Hole Number | 6 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 324 mm |
| Thickness | 82.5 mm |
| Brake Disc Thickness | 18 mm |
| Minimum thickness | 16 mm |
| Bolt Hole Circle Diameter | 139.7 mm |
| Centering Diameter | 96.3 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.10
Important compatibility info
| Function | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Placement on Vehicle | Right |
| Weight | 1.200 kg |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.09
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Weight | 10.04 kg |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 320 mm |
| Thickness | 52.1 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 28 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.07
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 317 mm |
| Thickness | 62 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 27 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 79 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Weight | 10.0 kg |
| Rotor Style | Internally Vented |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.07
Important compatibility info
| Piston conrod diameter | 22 mm |
| Weight | 4.400 kg |
| Shock Absorber Type | Gas Pressure |
| External Thread Size | M12 x 1,25 |
| Bore Diameter | 14 mm |
| Max. Length | 526 mm |
| Placement on Vehicle | Front Axle Right, Front Axle Left |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Mounting Type | Top pin, Bottom Clamp |
| Shock Absorber Design | Suspension Strut |
| Function | Shock Absorber |
| Type | Shock Absorber |
| Pipe Diameter | 51 mm |
| Min. Length | 355 mm |
| Mounting bores distance | 75 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.07
Important compatibility info
| Outer diameter | 76 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Weight | 0.762 kg |
| Type | Belt Tensioner, v-ribbed belt |
| Material | Plastic |
| Width of castor bearing surface | 28 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.07
Important compatibility info
| Weight | 9.672 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 330 mm |
| Thickness | 46.5 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Function | Brake Disc |
| Rotor Style | perforated/vented |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.06
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023