Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.442 kg |
| Material | Plastic |
| Opening Temperature | 97 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Additional Information | without gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Function | Cylinder Head, air compressor |
| Type | Cylinder Head, air compressor |
| Weight | 1.3 kg |
| Additional Information 2 | without spacer plate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Mounting points diameter | 17 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Length | 509 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Guide Rod |
| Pipe Diameter | 41 mm |
| Weight | 10.35 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Function | Drive Shaft |
| Additional Information 2 | with bolts/screws |
| Thread Size | M16x1,5 |
| Additional Information | with grease |
| Type | Drive Shaft |
| Min. Length | 526 mm |
| Bore Diameter | 10.6 mm |
| Number of mounting bores | 6 |
| Bolt Hole Circle Diameter | 94 mm |
| External Teeth, Wheel Side | 38 |
| Weight | 7.098 kg |
| ABS Ring Diameter | 104 mm |
| Wheel Sided Joint Diameter | 98 mm |
| Transmission-side joint diameter | 108 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Width | 48 mm |
| Placement on Vehicle | Rear Axle Right |
| Weight | 4.1 kg |
| Inner diameter | 120 mm |
| Outer diameter | 180 mm |
| Function | Bearing / Wheel Bearing |
| Type | Bearing / Wheel Bearing |
| Bearing Type | Tapered Roller Bearing |
| Bearing Code | 33024 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Weight | 3.88 kg |
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 30430 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Function | Clutch Release Bearing |
| Weight | 2.836 kg |
| for OE number | 81.30550.0116 |
| Type | Clutch Release Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Additional Information | with fastening/mounting material |
| Width | 50 mm |
| Inner diameter | 49 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Additional Information 2 | with ABS sensor ring |
| Weight | 1.824 kg |
| Outer diameter | 92 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Weight | 2.8 kg |
| Rated Power | 1.1 kW |
| Function | Starter |
| Type | Starter |
| Voltage | 12 V |
| Number of Teeth | 10 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Weight | 0.8 kg |
| Outer diameter | 124 mm |
| Inner diameter | 33 mm |
| Bolt Hole Circle Diameter | 80 mm |
| Thickness | 24 mm |
| Function | Joint, propshaft |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Placement on Vehicle | Front |
| Operating Mode | Pneumatic |
| Weight | 2.4 kg |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Max. Length | 418 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
| External Thread Size | M12 x 1,75 |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 19993 |
| Steering arm type | Control Arm |
| Material | Sheet Steel |
| Placement on Vehicle | Front Axle Right, Lower |
| Weight | 3.150 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | without holder |
| Additional Information 2 | without ball joint, with rubber mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Additional Information 2 | with bearing, with ball joint |
| Placement on Vehicle | Front Axle Left, Front |
| Material | Steel |
| External Thread Size | M14 x 1,5 |
| Weight | 4.635 kg |
| Steering arm type | Control Arm |
| Paired article numbers | 174786 |
| Cone Size | 24 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Weight | 4.635 kg |
| Cone Size | 24 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 174785 |
| Steering arm type | Control Arm |
| Additional Information 2 | with ball joint, with bearing |
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Right, Front |
| Material | Steel |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Placement on Vehicle | Front |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Top fork |
| Function | Shock Absorber, driver cab suspension |
| Mounting points diameter | 14 mm |
| Piston conrod diameter | 12.5 mm |
| Max. Length | 380 mm |
| Weight | 1.6 kg |
| Type | Shock Absorber, driver cab suspension |
| Pipe Diameter | 43 mm |
| External Thread Size | M14 x 2 |
| Min. Length | 278 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Width | 139 mm |
| Function | Oil Cooler, engine oil |
| Height | 134 mm |
| Length | 160 mm |
| Weight | 1.175 kg |
| Type | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Placement on Vehicle | Front |
| Operating Mode | Mechanical |
| Paired article numbers | 107684 |
| Weight | 2.0 kg |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 259 mm |
| Min. Length | 226 mm |
| Pipe Diameter | 40 mm. 46 mm |
| Mounting points diameter | 12 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Weight | 3.37 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 63 mm |
| Outer diameter | 74 mm |
| Number of Connectors / Ports | 2 |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with ABS sensor ring |
| Bolt Hole Circle Diameter | 108 mm |
| Additional Information | with fastening/mounting material |
| Outer diameter 1 | 63 mm |
| Outer diameter 2 | 136 mm |
| Sealing lip material | NBR (nitrile butadiene rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Placement on Vehicle | Front Axle Right, Upper |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 175623 |
| Weight | 2.569 kg |
| Cone Size | 18 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Steering arm type | Control Arm |
| Material | Aluminium |
| Placement on Vehicle | Front Axle Left, Lower, Front, Front Axle Right |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 1.5 kg |
| Additional Information | with rubber mounts, with lock nut |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (36954)
- 1x Febi Nut (15902)
£73.05
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023