Proud to be a UK-based company
Contact us
Important compatibility info
| Brake caliper piston diameter | 38 mm |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Material | Cast Aluminium |
| Paired article numbers | 181558 |
| Weight | 1.375 kg |
| Function | Brake Caliper |
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.09
Important compatibility info
| Weight | 2.05 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 145 mm. 49 mm |
| Number of Holes | 6 |
| Number of Teeth | 30 |
| Type | Wheel Hub |
| Function | Wheel Hub |
| Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.09
Important compatibility info
| Type | Window Regulator |
| Weight | 3.0 kg |
| Function | Window Regulator |
| Operating Mode | Manual |
| Paired article numbers | 183285 |
| Placement on Vehicle | Left Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.08
Important compatibility info
| Width | 39.5 mm |
| Number of Ribs | 7 |
| Tightening Torque | 85 Nm |
| Function | Alternator Freewheel Clutch |
| Additional Information 2 | with lid |
| Weight | 0.475 kg |
| Type | Alternator Freewheel Clutch |
| Outer diameter | 66 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.08
Important compatibility info
| Weight | 6.075 kg |
| Placement on Vehicle | Front Axle |
| Length | 738 mm |
| Outer diameter | 40 mm |
| Thickness | 103 mm |
| Rod/Strut | Push Rod |
| Cone Size | 26 mm |
| Function | Centre Rod Assembly |
| External Thread Size | M20 x 1,5 |
| Internal Thread Size | M30 x 1,5 RHT |
| Driver Position | for left-hand/right-hand drive vehicles |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.08
Important compatibility info
| Weight | 0.82 kg |
| Type | Parts Set, maintenance service |
| Function | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Filter (26706)
- 1x Febi Air Filter (27024)
- 1x Febi Fuel filter (26416)
- 1x Febi Screw Plug, oil sump (27531)
- 1x Febi Filter, cabin air (18641)
£70.08
Important compatibility info
| Outer diameter | 86 mm |
| Width | 62 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with ABS sensor ring |
| Inner diameter | 30 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Weight | 3.740 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.08
Important compatibility info
| Steering arm type | Control Arm |
| Additional Information 2 | with bearing |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 43138 |
| Weight | 2.1 kg |
| Material | Cast Steel |
| Placement on Vehicle | Front Axle Right, Lower, Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.08
Important compatibility info
| Weight | 0.5283 kg |
| Extra Description | febi Plus |
| Function | Oil Separator, crankcase ventilation |
| Type | Oil Separator, crankcase ventilation |
| Colour | Black |
| Material | Plastic |
| Additional Information | with venting hoses |
| for OE number | 06H 103 495 AJ S2 |
| Number of hoses | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Separator, crankcase ventilation (176317)
- 1x Febi Hose, crankcase ventilation (109552)
- 1x Febi Hose, crankcase ventilation (170674)
£70.08
Important compatibility info
| Weight | 0.271 kg |
| Voltage | 24 V |
| Combi Switch Function | with indicator function, with high beam function, with hazard warning light function |
| for OE number | 70351705 |
| Type | Steering Column Switch |
| Function | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.08
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Paired article numbers | 38180 |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Placement on Vehicle | Front Axle Left, Lower |
| Additional Information | with lock nut, with holder, with rubber mounts |
| Weight | 4.31 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (36895)
- 1x Febi Mounting, control/trailing arm (27069)
- 3x Febi Nut, ball joint (36734)
£70.08
Important compatibility info
| Function | Release Fork, clutch |
| Type | Release Fork, clutch |
| Additional Information | with bush, with fastening/mounting material |
| Weight | 2.582 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.08
Important compatibility info
| Additional Information | with rubber mounts |
| Paired article numbers | 185591 |
| Function | Control/Trailing Arm, wheel suspension |
| External Thread Size | M16 x 1,5 |
| Placement on Vehicle | Front Axle Right, Lower, Rear, outer |
| Material | Aluminium |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Cone Size | 19 mm |
| Weight | 3.480 kg |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.08
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Material | Aluminium |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Lower, Front |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Weight | 2.34 kg |
| Cone Size | 25 mm |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.08
Important compatibility info
| Weight | 0.555 kg |
| Outer diameter | 430 mm |
| Paired article numbers | 17852 |
| Number of Wings | 5 |
| Function | Fan Wheel, engine cooling |
| Type | Fan Wheel, engine cooling |
| for OE number | 102 200 21 23 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.08
Important compatibility info
| Type | Air Filter |
| Weight | 2.79 kg |
| Filter type | Filter Insert |
| Extra Description | febi Plus |
| Function | Air Filter |
| Inner diameter | 167 mm |
| Outer diameter | 303 mm |
| Height | 445 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.08
Important compatibility info
| for OE number | 15 01 009 34R |
| Additional Information 2 | with gear |
| Weight | 0.947 kg |
| Type | Oil Pump |
| Function | Oil Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.08
Important compatibility info
| Weight | 0.600 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Placement on Vehicle | Rear |
| for OE number | 82 00 427 529 |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.08
Important compatibility info
| Width | 35 mm |
| Outer diameter | 55 mm |
| Thickness | 106 mm |
| Inner diameter | 30 mm |
| Function | Suspension, propshaft |
| Weight | 0.47 kg |
| Type | Suspension, propshaft |
| Additional Information 2 | with ball bearing |
| Bearing Type | Rolling Bearing |
| Hole Spacing | 190 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.08
Important compatibility info
| Weight | 2.03 kg |
| Outer diameter | 143 mm |
| Thickness | 30 mm |
| Inner diameter | 30 mm |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
| for OE number | 038 105 243 K |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.08
Important compatibility info
| Pipe Diameter | 42 mm |
| Additional Information | with nuts |
| Function | Centre Rod Assembly |
| Type | Centre Rod Assembly |
| Length | 785 mm |
| Placement on Vehicle | Rear |
| Cone Size | 26 mm |
| Weight | 6.700 kg |
| Extra Description | ProKit |
| Rod/Strut | Push Rod |
| Thread Size | M20 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.08
Important compatibility info
| Additional Information | with rubber mounts |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Weight | 0.733 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.08
Important compatibility info
| Operating Mode | Mechanical |
| Weight | 2.0 kg |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Placement on Vehicle | Rear |
| Max. Length | 224 mm |
| Min. Length | 208 mm |
| Pipe Diameter | 40 mm |
| Mounting points diameter | 12 mm. 18 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.08
Important compatibility info
| Function | Tie Rod |
| Placement on Vehicle | Front Axle |
| Length | 1446 mm |
| Cone Size | 20 mm |
| Weight | 4.9 kg |
| Pipe Diameter | 30 mm |
| External Thread Size | M16 x 1,5 |
| Extra Description | ProKit |
| Type | Tie Rod |
| Internal Thread Size | M24 x 1,5 LHT, M24 x 1,5 RHT |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.08
Important compatibility info
| Weight | 0.990 kg |
| Type | Oil Cooler, automatic transmission |
| Function | Oil Cooler, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.08
Important compatibility info
| Additional Information | with lock nut |
| Additional Information 2 | with bearing, with ball joint |
| Placement on Vehicle | Rear, Lower, Front Axle Left |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 179414 |
| External Thread Size | M14 x 1,5 |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 1.950 kg |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.08
Important compatibility info
| Weight | 3.45 kg |
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 41808 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with rubber mount |
| Replaces | 41728; 41850 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.08
Important compatibility info
| Additional Information | with gasket/seal |
| Weight | 1.13 kg |
| Length | 370 mm |
| Height | 188 mm |
| Width | 42 mm |
| Number of Connectors / Ports | 2 |
| Type | Heat Exchanger, interior heating |
| Function | Heat Exchanger, interior heating |
| Core Length | 188 mm |
| Core Width | 370 mm |
| Core Depth | 42 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.08
Important compatibility info
| Additional Information | with coolant level sensor |
| Weight | 0.635 kg |
| Material | Plastic |
| Colour | Black, White |
| Number of Connectors / Ports | 2 |
| Function | Expansion Tank, coolant |
| Type | Expansion Tank, coolant |
| Additional Information 2 | without lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.08
Important compatibility info
| Weight | 13.53 kg |
| Rim Hole Number | 6 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 304 mm |
| Thickness | 128.5 mm |
| Brake Disc Thickness | 30 mm |
| Brake Disc Type | Internally Vented |
| Minimum thickness | 27.75 mm |
| Bolt Hole Circle Diameter | 205 mm |
| Centering Diameter | 124 mm |
| Surface | Coated |
| Function | Brake Disc |
| Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.08
Important compatibility info
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| External Thread Size | M20 x 1,5 |
| Cone Size | 28.9 mm |
| Weight | 7.500 kg |
| Rod/Strut | Push Rod |
| Additional Information 2 | with crown nut |
| Length | 805 mm |
| Adjustable | Adjustable on one side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.08
Important compatibility info
| Placement on Vehicle | Right Rear |
| Operating Mode | Pneumatic |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 339 mm |
| Min. Length | 242 mm |
| Piston conrod diameter | 12.5 mm |
| Function | Shock Absorber, driver cab suspension |
| Mounting points diameter | 12 mm |
| Pipe Diameter | 44.5 mm |
| Type | Shock Absorber, driver cab suspension |
| Weight | 2.7 kg |
| External Thread Size | M8 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.08
Important compatibility info
| Placement on Vehicle | Right Front |
| Operating Mode | Manual |
| Paired article numbers | 183287 |
| Weight | 3.0 kg |
| Type | Window Regulator |
| Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.08
Important compatibility info
| External Thread Size | M12 x 1,25 |
| Weight | 2.996 kg |
| Placement on Vehicle | Front Axle Left |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 173585 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Cone Size | 17.4 mm |
| Additional Information | with rubber mounts, with crown nut and split pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.08
Important compatibility info
| Width | 50 mm |
| Outer diameter | 90 mm |
| Mounting points diameter | 23 mm |
| Type | Deflection/Guide Pulley, V-ribbed belt |
| Function | Deflection/Guide Pulley, V-ribbed belt |
| Material | Metal |
| Width of castor bearing surface | 38 mm |
| Weight | 1.779 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.08
Important compatibility info
| Length | 1150 mm |
| Outer diameter | 33 mm |
| Inner diameter | 20 mm |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Pipe Diameter | 33 mm |
| Function | Centre Rod Assembly |
| Weight | 5.58 kg |
| External Thread Size | M24 x 1,5 |
| Additional Information | with castellated nut and split pins |
| Placement on Vehicle | from 1st idler arm to the 2nd idler arm |
| Driver Position | for left-hand/right-hand drive vehicles |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.08
Important compatibility info
| Weight | 0.714 kg |
| for OE number | 5 0429 4640 |
| Type | Clutch Release Bearing |
| Function | Clutch Release Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.08
Important compatibility info
| Material | Plastic |
| Weight | 1.385 kg |
| for OE number | 17 13 9 846 642 |
| Type | Expansion Tank, coolant |
| Function | Expansion Tank, coolant |
| Additional Information | with coolant level sensor |
| Additional Information 2 | without lid |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.08
Important compatibility info
| Weight | 3.75 kg |
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | Rear |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom Pin |
| Max. Length | 276 mm |
| Min. Length | 237 mm |
| Mounting points diameter | 14 mm |
| Piston conrod diameter | 14 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.08
Important compatibility info
| Eject Force | 380 N |
| Function | Gas Spring, boot/cargo area |
| Mounting points diameter | 17.8 mm |
| Stroke | 172 mm |
| Weight | 0.3 kg |
| Housing Diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, boot/cargo area |
| Housing length | 254.5 mm |
| Placement on Vehicle | both sides |
| Length | 454 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.08
Important compatibility info
| Weight | 0.86 kg |
| Placement on Vehicle | Left, Rear |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, automatic transmission |
| Type | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.08
Important compatibility info
| Function | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Placement on Vehicle | Right, Left |
| Weight | 1.48 kg |
| Type | Mounting, engine |
| Additional Information 2 | with splash protection cover |
| Replaces | 31079 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.08
Important compatibility info
| Weight | 0.672 kg |
| Width of castor bearing surface | 26 mm |
| Outer diameter | 70 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| for OE number | 11 28 7 549 588 |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.08
Important compatibility info
| External Thread Size | M27 x 1,5 |
| Weight | 7.54 kg |
| Cone Size | 30 mm. 32 mm |
| Function | Centre Rod Assembly |
| Length | 840 mm |
| Outer diameter | 48 mm |
| Rod/Strut | Push Rod |
| Extra Description | ProKit |
| Internal Thread Size | M30 x 1,5 RHT |
| Type | Centre Rod Assembly |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.08
Important compatibility info
| Type | Pipe, EGR valve |
| Function | Pipe, EGR valve |
| Weight | 0.2 kg |
| for OE number | 03L 131 521 Q |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.08
Important compatibility info
| Weight | 2.007 kg |
| Type | Condenser, air conditioning |
| Function | Condenser, air conditioning |
| Core Length | 520 mm |
| Core Width | 401 mm |
| Core Depth | 16 mm |
| Additional Information 2 | with dryer |
| Refrigerant | R 134a |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.08
Important compatibility info
| Outer diameter 1 | 68 mm |
| Weight | 4.280 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 46 mm |
| Outer diameter | 93 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
| Inner diameter | 30 mm |
| Bearing Type | Tapered Roller Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Outer diameter 2 | 140 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing Kit (172781)
- 1x Febi Nut, kingpin (173786)
£70.08
Important compatibility info
| Material | Steel |
| Weight | 7.000 kg |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
| Rod/Strut | Push Rod |
| Adjustable | Adjustable on one side |
| Length | 669 mm |
| Placement on Vehicle | Front Axle |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Cone Size | 28.6 mm |
| External Thread Size | M20 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.08
Important compatibility info
| Steering arm type | Control Arm |
| Paired article numbers | 185204 |
| Weight | 1.586 kg |
| Cone Size | 21 mm |
| Additional Information 2 | with ball joint |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Left, Upper |
| Material | Aluminium |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.08
Important compatibility info
| Outer diameter | 110.5 mm. 100.5 mm |
| Function | Bellow, air suspension |
| Weight | 0.46 kg |
| External Thread Size | M6 x 1 |
| Height | 138 mm |
| Type | Bellow, air suspension |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.07
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023