Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.714 kg |
| for OE number | 5 0429 4640 |
| Type | Clutch Release Bearing |
| Function | Clutch Release Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.07
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with screw |
| Thread Size | M16x1,5 |
| Bolt Hole Circle Diameter | 78 mm |
| Bore Diameter | 8.5 mm |
| External Teeth, Wheel Side | 36 |
| Weight | 6.530 kg |
| Number of mounting bores | 6 |
| Min. Length | 764 mm |
| Wheel Sided Joint Diameter | 81.4 mm |
| Transmission-side joint diameter | 94 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.07
Important compatibility info
| Type | Drive Shaft |
| Function | Drive Shaft |
| Transmission-side joint diameter | 100 mm |
| Wheel Sided Joint Diameter | 89 mm |
| Additional Information 2 | with nut |
| Thread Size | M16x1,5 |
| External Teeth, Wheel Side | 36 |
| Weight | 5.700 kg |
| Min. Length | 546 mm |
| Placement on Vehicle | Front Axle Left |
| Additional Information | with grease |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.07
Important compatibility info
| External Thread Size | M12 x 1,25 |
| Weight | 2.996 kg |
| Placement on Vehicle | Front Axle Left |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 173585 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Cone Size | 17.4 mm |
| Additional Information | with rubber mounts, with crown nut and split pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.07
Important compatibility info
| Weight | 1.038 kg |
| Additional Information | without kingpin |
| Outer diameter | 54 mm |
| Additional Information 2 | with bearing |
| Paired article numbers | 15856 |
| Function | Repair Kit, kingpin |
| Type | Repair Kit, kingpin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 4x Febi Bush, steering knuckle (15858)
- 1x Febi Seal Ring, steering knuckle (15886)
- 1x Febi Washer (15887)
- 1x Febi Bush, steering knuckle (15889)
£71.07
Important compatibility info
| Weight | 6.075 kg |
| Placement on Vehicle | Front Axle |
| Length | 738 mm |
| Outer diameter | 40 mm |
| Thickness | 103 mm |
| Rod/Strut | Push Rod |
| Cone Size | 26 mm |
| Function | Centre Rod Assembly |
| External Thread Size | M20 x 1,5 |
| Internal Thread Size | M30 x 1,5 RHT |
| Driver Position | for left-hand/right-hand drive vehicles |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.07
Important compatibility info
| Pipe Diameter | 42 mm |
| Additional Information | with nuts |
| Function | Centre Rod Assembly |
| Type | Centre Rod Assembly |
| Length | 785 mm |
| Placement on Vehicle | Rear |
| Cone Size | 26 mm |
| Weight | 6.700 kg |
| Extra Description | ProKit |
| Rod/Strut | Push Rod |
| Thread Size | M20 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.07
Important compatibility info
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| External Thread Size | M20 x 1,5 |
| Cone Size | 28.9 mm |
| Weight | 7.500 kg |
| Rod/Strut | Push Rod |
| Additional Information 2 | with crown nut |
| Length | 805 mm |
| Adjustable | Adjustable on one side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.07
Important compatibility info
| Weight | 3.75 kg |
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | Rear |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom Pin |
| Max. Length | 276 mm |
| Min. Length | 237 mm |
| Mounting points diameter | 14 mm |
| Piston conrod diameter | 14 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.07
Important compatibility info
| Weight | 0.271 kg |
| Voltage | 24 V |
| Combi Switch Function | with indicator function, with high beam function, with hazard warning light function |
| for OE number | 70351705 |
| Type | Steering Column Switch |
| Function | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.07
Important compatibility info
| Eject Force | 380 N |
| Function | Gas Spring, boot/cargo area |
| Mounting points diameter | 17.8 mm |
| Stroke | 172 mm |
| Weight | 0.3 kg |
| Housing Diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, boot/cargo area |
| Housing length | 254.5 mm |
| Placement on Vehicle | both sides |
| Length | 454 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.07
Important compatibility info
| Weight | 0.6 kg |
| Type | Valve, ABS regulation |
| Valve type | Control Valve |
| Internal Thread Size | M16 x 1,5 |
| Extra Description | febi Plus |
| Function | Valve, ABS regulation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.06
Important compatibility info
| Outer diameter | 70 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Weight | 0.756 kg |
| Width of castor bearing surface | 32 mm |
| Type | Belt Tensioner, v-ribbed belt |
| for OE number | 11 28 8 620 022 |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.06
Important compatibility info
| Weight | 2.145 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 141 mm |
| Number of Holes | 5 |
| Function | Wheel Hub |
| Type | Wheel Hub |
| Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.06
Important compatibility info
| Chain Type | Silent Chain, Closed chain |
| Function | Timing Chain |
| Number of Chain Links | 132 |
| Weight | 0.445 kg |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.03
Important compatibility info
| Weight | 5.320 kg |
| Outer diameter | 480 mm |
| Number of Teeth | 158 |
| Type | Ring Gear, flywheel |
| Function | Ring Gear, flywheel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.03
Important compatibility info
| Additional Information 2 | with screw |
| Weight | 2.59 kg |
| Width | 42 mm |
| Outer diameter | 155 mm |
| Inner diameter | 25 mm |
| Number of Ribs | 6 |
| Parameter | 7PK |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (36244)
- 1x Febi Pulley Bolt (36246)
£71.03
Important compatibility info
| Weight | 1.781 kg |
| Material | PA (polyamide) |
| Function | Expansion Tank, coolant |
| Additional Information | with coolant level sensor |
| Type | Expansion Tank, coolant |
| Additional Information 2 | without lid |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.03
Important compatibility info
| Weight | 1.838 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Bush Set, axle beam |
| Inner diameter | 33 mm |
| Thickness | 95 mm |
| Outer diameter | 79 mm |
| Type | Bush Set, axle beam |
| Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 8x Febi Spring Washer (01074)
- 2x Febi Springwasher (01076)
- 8x Febi Screw (04859)
- 2x Febi Screw (04956)
- 2x Febi Sealing/Protective Cap (04976)
- 2x Febi Bushing, axle beam (04980)
£71.03
Important compatibility info
| Cone Size 2 | 22 mm |
| Function | Control/Trailing Arm, wheel suspension |
| External Thread Size | M14 x 1,5 |
| Material | Aluminium |
| Placement on Vehicle | Front Axle Left, Lower, Front |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 17 mm |
| Weight | 3.182 kg |
| Paired article numbers | 185797 |
| Steering arm type | Control Arm |
| Additional Information 2 | with ball joint, with rubber mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.02
Important compatibility info
| Extra Description | ProKit |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 21.8 mm |
| Weight | 1.78 kg |
| Steering arm type | Control Arm |
| Paired article numbers | 176674 |
| Material | Aluminium |
| Additional Information 2 | with ball joint, with bearing |
| Additional Information | with fastening/mounting material |
| Placement on Vehicle | Upper, Front Axle Right |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (172770)
- 2x Febi Nut (173927)
- 2x Febi Bolt, control arm (175088)
£71.01
Important compatibility info
| Placement on Vehicle | Upper, Front Axle Left |
| Type | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size | 21.8 mm |
| Weight | 1.78 kg |
| Paired article numbers | 176673 |
| Steering arm type | Control Arm |
| Additional Information | with fastening/mounting material |
| Material | Aluminium |
| Additional Information 2 | with bearing, with ball joint |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (172771)
- 2x Febi Nut (173927)
- 2x Febi Bolt, control arm (175088)
£71.01
Important compatibility info
| Weight | 0.618 kg |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 130 |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Timing Chain Size | G53HP, G53HR, G53AM, G53HC |
| Replaces | 34163 |
| Additional Information | with slide rails, with chain tensioner |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (17617)
- 1x Febi Tensioner, timing chain (34161)
- 1x Febi Guide Rails Kit, timing chain (46414)
£71.00
Important compatibility info
| Placement on Vehicle | Front, Rear Axle Left, Rear Axle Right |
| Outer diameter | 109 mm |
| Weight | 0.782 kg |
| Function | Bushing, axle beam |
| Material | Rubber/Metal |
| Type | Bushing, axle beam |
| Thickness | 93 mm |
| Inner diameter | 21 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.98
Important compatibility info
| Weight | 1.396 kg |
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Paired article numbers | 170568 |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.96
Important compatibility info
| Length | 615 mm |
| Height | 40 mm |
| Width | 431 mm |
| Filter type | Activated Carbon Filter, High efficiency air filter (HEPA) |
| Paired article numbers | 194788 |
| Weight | 1.25 kg |
| Type | Filter, cabin air |
| Function | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.96
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 61 mm |
| Outer diameter | 82 mm |
| Weight | 3.445 kg |
| Outer diameter 1 | 64 mm |
| Outer diameter 2 | 152 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.94
Important compatibility info
| Weight | 0.07 kg |
| Number of Connectors / Ports | 2 |
| Function | Sensor, exhaust gas temperature |
| Type | Sensor, exhaust gas temperature |
| for OE number | 03G 906 088 BA |
| Placement on Vehicle | after soot particulate filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.93
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178737 |
| Weight | 1.91 kg |
| Function | Brake Caliper |
| Brake caliper piston diameter | 34 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.92
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178736 |
| Weight | 1.91 kg |
| Function | Brake Caliper |
| Brake caliper piston diameter | 34 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.92
Important compatibility info
| Weight | 0.04 kg |
| Function | Injector |
| Number of Connectors / Ports | 2 |
| Operating Mode | Electric |
| Additional Information | with gaskets/seals |
| Type | Injector |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.91
Important compatibility info
| Number of Connectors / Ports | 3 |
| Function | Sensor, compressed-air system |
| Weight | 0.067 kg |
| Type | Sensor, compressed-air system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.91
Important compatibility info
| Weight | 9.240 kg |
| Rotor Style | Internally Vented |
| Rim Hole Number | 6 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 320 mm |
| Thickness | 38.05 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.90
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Weight | 7.84 kg |
| Rotor Style | slotted/perforated, internally vented |
| Minimum thickness | 20.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 324 mm |
| Centering Diameter | 75 mm |
| Surface | Coated |
| Thickness | 67.2 mm |
| Brake Disc Thickness | 22 mm |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.89
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Additional Information | with lock nut |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Material | Aluminium |
| Additional Information 2 | with bearing, with ball joint |
| Placement on Vehicle | Rear, Lower, Front Axle Right |
| Steering arm type | Control Arm |
| Paired article numbers | 179413 |
| Weight | 1.950 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.89
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Weight | 8.9 kg |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 313 mm |
| Thickness | 70 mm |
| Brake Disc Thickness | 32 mm |
| Inner diameter | 115 mm |
| Minimum thickness | 30 mm |
| Bolt Hole Circle Diameter | 144.3 mm |
| Centering Diameter | 115 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.87
Important compatibility info
| Rotor Style | Internally Vented |
| Outer diameter | 320 mm |
| Thickness | 42.7 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 20 mm |
| Bolt Hole Circle Diameter | 110 mm |
| Centering Diameter | 70 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Placement on Vehicle | Rear Axle |
| Weight | 7.5 kg |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.87
Important compatibility info
| Rim Hole Number | 6 -Hole |
| Weight | 6.905 kg |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 288 mm |
| Thickness | 56 mm |
| Brake Disc Thickness | 24 mm |
| Minimum thickness | 22 mm |
| Bolt Hole Circle Diameter | 126 mm |
| Centering Diameter | 104 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.84
Important compatibility info
| Weight | 1.04 kg |
| Width | 19 mm |
| Number of Teeth | 135 |
| Belts | with rounded tooth profile |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (14608)
- 1x Febi Water Pump, engine cooling (18124)
£70.84
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Weight | 1.26 kg |
| Chain Type | Duplex, with chain lock |
| Number of Chain Links | 168 |
| Timing Chain Size | D67ZN |
| Function | Timing Chain |
| Type | Timing Chain |
| Replaces | 25355 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.83
Important compatibility info
| Weight | 0.583 kg |
| Outer diameter | 55 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Width of castor bearing surface | 26 mm |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.83
Important compatibility info
| Weight | 1.873 kg |
| Inner diameter | 35 mm |
| Outer diameter | 156 mm |
| Function | Belt Pulley, crankshaft |
| Parameter | 6 |
| Type | Belt Pulley, crankshaft |
| Width | 43 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.80
Important compatibility info
| Weight | 2.080 kg |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Replaces | 37141 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.80
Important compatibility info
| Weight | 6.7 kg |
| Placement on Vehicle | Front Axle |
| Length | 206 mm |
| Width | 190 mm |
| Wear Warning Contact | excl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 110.2 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.79
Important compatibility info
| Number of Chain Links | 90 |
| Weight | 0.535 kg |
| Type | Timing Chain Kit |
| for OE number | 24351-2F000 S1 |
| Function | Timing Chain Kit |
| Extra Description | Basic Short Kit |
| Chain Type | Simplex, Closed chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (48570)
- 1x Febi Tensioner, timing chain (176279)
- 1x Febi Guide, timing chain (176280)
- 1x Febi Guide, timing chain (175348)
£70.78
Important compatibility info
| Brake caliper piston diameter | 51 mm |
| Function | Brake Caliper |
| Type | Brake Caliper |
| Weight | 2.38 kg |
| Paired article numbers | 182129 |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Material | Cast Iron |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.77
Important compatibility info
| Weight | 0.628 kg |
| Housing length | 209.5 mm |
| Mounting points diameter | 18 mm |
| Paired article numbers | 32045 |
| Placement on Vehicle | Right Rear |
| Length | 345 mm |
| Eject Force | 1550 N |
| Stroke | 87 mm |
| Housing Diameter | 31 mm |
| Piston conrod diameter | 10 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.76
Important compatibility info
| Weight | 0.614 kg |
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
| for turbocharger (art. no.) | 190678, 189887 |
| for OE number | 11 65 7 618 035 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.75
Important compatibility info
| Type | Sensor, exhaust gas temperature |
| Placement on Vehicle | Soot Particulate Filter |
| Number of Connectors / Ports | 2 |
| Weight | 0.078 kg |
| Cable Length | 1100 mm |
| Function | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.71
Important compatibility info
| Weight | 0.515 kg |
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 86 |
| Timing Chain Size | Z46 |
| Function | Chain Kit, oil pump drive |
| Type | Chain Kit, oil pump drive |
| Extra Description | Standard Medium Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Chain, oil pump drive (33931)
- 1x Febi Chain Tensioner, oil pump drive (33934)
- 1x Febi Sprocket/Gear, oil pump (33932)
- 1x Febi Sprocket, crankshaft (49094)
£70.71
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023