Important compatibility info
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 30195 |
Weight | 2.230 kg |
Placement on Vehicle | Front Axle Left, Lower, Front |
Function | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint, with bearing |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with lock nut |
External Thread Size | M14 x 1,5 |
Cone Size 2 | 22 mm |
Cone Size | 19.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 10 mm. 5.75 mm |
Operating Mode | Mechanical |
Mounting points diameter | 6.85 mm |
Function | Coolant Control Valve |
Weight | 0.14 kg |
Type | Coolant Control Valve |
for OE number | 1 795 464 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Wheel Bearing Kit |
Bearing Type | Angular Ball Bearing |
Inner diameter | 40 mm |
Additional Information 2 | with shaft seal, with retaining ring |
Outer diameter | 74 mm |
Width | 36 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Wheel Bearing Kit |
Weight | 0.67 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.544 kg |
Number of Connectors / Ports | 2 |
for OE number | 6Q1 423 893 M |
External Thread Size | M14 x 1,5 |
Function | Hydraulic Hose, steering |
Type | Hydraulic Hose, steering |
Driver Position | for left-hand drive vehicles |
for steering gear manufacturer | SMI-KOYO |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.640 kg |
Placement on Vehicle | Rear Axle |
Width | 32 mm |
Outer diameter | 180 mm |
Inspection Tag | ECE R90 Approved |
Mounting Type | Pre-assembled |
Function | Brake Shoe Set |
Piston Diameter | 19.1 mm |
Type | Brake Shoe Set |
Additional Information | with wheel brake cylinder, with accessories, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Outer |
Width | 54.3 mm. 76.15 mm |
Outer diameter | 85 mm |
Thickness | 30 mm |
Steering arm type | for triangular control arm (CV) |
Bolt Hole Circle Diameter | 21 mm |
Function | Repair Kit, control/trailing arm |
Weight | 5.11 kg |
for OE number | 21295230 |
Type | Repair Kit, control/trailing arm |
Additional Information 2 | with spacer disc, with retaining ring |
Hole Spacing | 130 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Repair Kit, control/trailing arm (27570)
Important compatibility info
External Teeth, Wheel Side | 30 |
Additional Information | with Split Pin |
Additional Information 2 | with nut |
Thread Size | M24x1,5 |
Function | Drive Shaft |
Weight | 7.124 kg |
External Teeth, Diff.Side | 27 |
Min. Length | 617 mm |
Wheel Sided Joint Diameter | 90.9 mm |
Transmission-side joint diameter | 91.7 mm |
Type | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Teeth | 11 |
Rated Power | 1.4 kW |
Weight | 2.8 kg |
Type | Starter |
Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.15 kg |
Function | Repair Kit, automatic adjustment |
Type | Repair Kit, automatic adjustment |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.401 kg |
Length | 145 mm |
Width | 49 mm. 13 mm |
Thickness | 100 mm |
Outer diameter | 55 mm |
Inner diameter | 30 mm |
Function | Suspension, propshaft |
Type | Suspension, propshaft |
Additional Information 2 | with ball bearing |
Bearing Type | Rolling Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension, propshaft (30927)
- 1x Febi Bearing, propshaft centre bearing (05362)
Important compatibility info
Number of Connectors / Ports | 3 |
Function | Coolant Control Valve |
Weight | 0.696 kg |
Extra Description | febi Plus |
Type | Coolant Control Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.04 kg |
Height | 41 mm |
Outer diameter | 167 mm |
Inner diameter | 46 mm |
Number of Ribs | 5 |
Parameter | 6PK |
Function | Belt Pulley, crankshaft |
Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Shock Absorber Type | Oil Pressure |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Max. Length | 679 mm |
Min. Length | 416 mm |
Pipe Diameter | 53 mm. 45 mm |
Mounting points diameter | 14 mm |
Piston conrod diameter | 12.5 mm |
Function | Shock Absorber |
Weight | 1.85 kg |
Type | Shock Absorber |
Shock Absorber Design | Telescopic Shock Absorber |
Replaces | 20024 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.391 kg |
Placement on Vehicle | Right |
Bearing/Mounting Type | Hydro Mount |
Function | Mounting, engine |
Paired article numbers | 170569 |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.860 kg |
Additional Information 2 | with screw |
Width | 29 mm |
Outer diameter | 146 mm |
Inner diameter | 14 mm |
Number of Ribs | 5 |
Parameter | 6PK |
Function | Belt Pulley, crankshaft |
Extra Description | ProKit |
Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (34846)
- 1x Febi Pulley Bolt (33681)
Important compatibility info
Driver Position | for right-hand drive vehicles |
Type | Cable Pull, manual transmission |
Weight | 1.426 kg |
Inner length 2 | 868 mm |
Function | Cable Pull, manual transmission |
for OE number | 1 774 307 |
Inner length 1 | 830 mm |
Outer length 1 | 1213 mm |
Outer length 2 | 1203 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 186460 |
Steering arm type | Control Arm |
Additional Information 2 | with bearing |
Function | Control/Trailing Arm, wheel suspension |
Material | Sheet Steel |
Placement on Vehicle | Rear Axle Left |
Type | Control/Trailing Arm, wheel suspension |
Weight | 1.954 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 4 |
Height | 162 mm |
Material | Paper |
Outer diameter | 111 mm |
Filter type | In-Line Filter |
Weight | 0.675 kg |
Pipe Diameter | 8 mm. 9.5 mm |
Type | Fuel filter |
Function | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 194740 |
Number of Connectors / Ports | 2 |
Weight | 0.580 kg |
Type | Control Element, parking brake caliper |
Placement on Vehicle | Rear Axle Left |
Function | Control Element, parking brake caliper |
Extra Description | febi Plus |
Number of Teeth | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 9.38 kg |
Rotor Style | Internally Vented |
Placement on Vehicle | Front Axle |
Outer diameter | 320 mm |
Thickness | 44 mm |
Brake Disc Thickness | 28 mm |
Minimum thickness | 26 mm |
Bolt Hole Circle Diameter | 114.3 mm |
Centering Diameter | 68 mm |
Surface | Coated |
Function | Brake Disc |
Rim Hole Number | 5 -Hole |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | CR (chloroprene rubber) |
Outer diameter | 240 mm. 130 mm |
Thickness | 470 mm |
Version | OE Standard |
Function | Bellow, air suspension |
Type | Bellow, air suspension |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information | without piston |
Weight | 2.100 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rotor Style | Internally Vented |
Weight | 7.3 kg |
Placement on Vehicle | Front Axle |
Outer diameter | 300 mm |
Thickness | 68 mm |
Brake Disc Thickness | 28 mm |
Minimum thickness | 25.4 mm |
Bolt Hole Circle Diameter | 112 mm |
Centering Diameter | 80 mm |
Surface | Coated |
Number of mounting bores | 5 |
Function | Brake Disc |
Rim Hole Number | 5 -Hole |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right, Lower |
Additional Information | with rubber mounts |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Weight | 10.398 kg |
Steering arm type | Control Arm |
Inner diameter | 16 mm |
Cone Size | 23 mm |
Material | Steel |
Additional Information 2 | without ball joint |
Paired article numbers | 175616 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.837 kg |
Mounting points diameter | 18 mm |
Housing length | 310.5 mm |
Placement on Vehicle | both sides |
Length | 515 mm |
Eject Force | 660 N |
Stroke | 164 mm |
Housing Diameter | 34 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, boot/cargo area |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | Requires special tools for mounting |
Chain Type | Duplex, with chain lock |
Number of Chain Links | 110 |
Weight | 0.988 kg |
Timing Chain Size | D67HP |
Function | Timing Chain |
Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right |
Bearing/Mounting Type | Hydro Mount |
Function | Mounting, engine |
Type | Mounting, engine |
for OE number | 52017618 |
Weight | 2.25 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 7.1 kg |
Internal Thread Size | M22 x 1,5 |
Number of Connectors / Ports | 4 |
Length | 324 mm |
Material | Steel |
Outer diameter | 310 mm |
Capacity | 20 l |
Operating Pressure | 12.5 bar |
Type | Air Tank, compressed-air system |
Function | Air Tank, compressed-air system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Bushing, axle beam |
Weight | 1.300 kg |
Inner diameter | 30 mm |
Thickness | 95 mm |
Outer diameter | 125 mm |
Material | Rubber/Metal |
Placement on Vehicle | Front, Rear Axle Left, Rear Axle Right |
Function | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.081 kg |
Units / Pulleys | incl. deflection pulley |
Number of Ribs | 7 |
Length | 1570 mm |
Function | V-Ribbed Belt Set |
Type | V-Ribbed Belt Set |
Additional Information | with belt tensioner for V-ribbed belt |
Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (177663)
- 1x Febi Belt Tensioner, v-ribbed belt (100294)
- 1x Febi Deflection/Guide Pulley, v-ribbed belt (49367)
Important compatibility info
Outer diameter | 168 mm |
Weight | 1.905 kg |
Function | Ring, wheel hub |
Inner diameter | 105 mm |
Thickness | 24 mm |
Type | Ring, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023