Proud to be a UK-based company
Contact us
Important compatibility info
| Length | 362 mm |
| Eject Force | 540 N |
| Stroke | 121 mm |
| Mounting points diameter | 17.8 mm |
| Placement on Vehicle | both sides |
| Weight | 0.179 kg |
| Housing Diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, bonnet |
| Housing length | 196 mm |
| Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.03
Important compatibility info
| Weight | 1.920 kg |
| Additional Information | with thrust ring |
| Screw length below head | 73 mm |
| Function | Repair Kit, flywheel |
| Type | Repair Kit, flywheel |
| Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Pilot Bearing, clutch (04515)
- 1x Febi Shaft Seal, crankshaft (01203)
- 10x Febi Flywheel Bolt (06076)
- 1x Febi Ring Gear, crankshaft (07720)
£44.46
Important compatibility info
| Weight | 1.36 kg |
| Steering | with tie rod end |
| External Thread Size | M18 x 1,5, M14 x 1,5 |
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 40515 |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (27159)
- 1x Febi Inner Tie Rod (27716)
- 1x Febi Bellow, steering (26506)
- 1x Febi Clamping Clip (38756)
- 1x Febi Clamping Clip (38764)
£39.77
Important compatibility info
| Weight | 0.131 kg |
| Thickness | 33 mm |
| Spanner Size | 32 |
| Surface | Zink-nickel coated |
| Bolt Head/Nut Design | Male Hex |
| Material | Steel |
| Function | Spring Clamp Nut |
| Internal Thread Size | M22 x 2,5 |
| Type | Spring Clamp Nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£7.19
Important compatibility info
| Surface | Zink flake coated |
| Weight | 0.016 kg |
| External Thread Size | M12 x 1,5 |
| Length | 16 mm |
| Material | Steel |
| Spanner Size | 17 |
| Thread Length | 10.5 mm |
| Bolt Head/Nut Design | Male Hex |
| Quality/ Grade | 6.8 |
| Type | Screw Plug, oil sump |
| Function | Screw Plug, oil sump |
| Screw length below head | 11 mm |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Screw Plug, oil sump (171283)
£6.47
Important compatibility info
| Weight | 6.65 kg |
| Brake Disc Thickness | 16 mm |
| Minimum thickness | 13 mm |
| Bolt Hole Circle Diameter | 118 mm |
| Surface | Coated |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 276 mm |
| Thickness | 69.4 mm |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
| Rotor Style | Solid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.08
Important compatibility info
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Weight | 1.690 kg |
| Outer diameter | 74 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Width of castor bearing surface | 38 mm |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£51.27
Important compatibility info
| Material | Metal |
| Outer diameter | 70 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Weight | 0.376 kg |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 35.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bearing (22096)
£26.12
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 308 mm |
| Thickness | 50.1 mm |
| Brake Disc Thickness | 27 mm |
| Minimum thickness | 25 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 63 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Weight | 8.8 kg |
| Rotor Style | Internally Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.95
Important compatibility info
| for OE number | 12380-30010 |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Weight | 0.891 kg |
| Placement on Vehicle | Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.44
Important compatibility info
| Weight | 0.060 kg |
| Opening Pressure | 2 bar |
| Function | Cap, coolant tank |
| Material | Plastic |
| Type | Cap, coolant tank |
| for OE number | 000 501 82 15 |
| Colour | Black |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£8.92
Important compatibility info
| Weight | 0.37 kg |
| Function | Air Suspension Valve / Valve, driver cab suspension |
| Type | Air Suspension Valve / Valve, driver cab suspension |
| Placement on Vehicle | Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.53
Important compatibility info
| Length | 302 mm |
| Weight | 1.39 kg |
| Number of Coils | 6.8 |
| Function | Suspension Spring |
| Outer diameter | 110 mm |
| Placement on Vehicle | Rear Axle |
| Type | Suspension Spring |
| Wire Diameter | 10.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.28
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with screw |
| Thread Size | M10x1,5 |
| External Teeth, Wheel Side | 36 |
| Weight | 7.372 kg |
| External Teeth, Diff.Side | 23 |
| Min. Length | 904 mm |
| Wheel Sided Joint Diameter | 79.4 mm |
| Transmission-side joint diameter | 74.2 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.98
Important compatibility info
| Number of Connectors / Ports | 4 |
| Function | Sensor, intake manifold pressure |
| Weight | 0.020 kg |
| Type | Sensor, intake manifold pressure |
| for OE number | 1 940 807 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£42.21
Important compatibility info
| Length | 317 mm |
| Diameter | 1 mm |
| Material | Steel |
| Paired article numbers | 184963 |
| Rod/Strut | Coupling Rod |
| Weight | 0.375 kg |
| Placement on Vehicle | Front Axle Left, outer |
| Thread Length | 25 mm |
| Spanner Size | 15 |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M10 x 1,5 |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.85
Important compatibility info
| Weight | 1.6 kg |
| Number of Connectors / Ports | 2 |
| Function | Interior Blower |
| Type | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.36
Important compatibility info
| Operating pressure to | 8 bar |
| Function | Hydraulic Pump, steering |
| Weight | 3.100 kg |
| Number of mounting bores | 4 |
| Rotation Direction | Clockwise rotation |
| Type | Hydraulic Pump, steering |
| Pulleys | with belt pulley |
| Inner diameter | 20 mm |
| Operating Mode | Hydraulic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.56
Important compatibility info
| Weight | 0.902 kg |
| Placement on Vehicle | Front |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 06 84 220 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.94
Important compatibility info
| Function | Brake Hose |
| Type | Brake Hose |
| External Thread Size | M10 x 1 |
| Internal Thread Size | M10 x 1 |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Weight | 0.1 kg |
| Length | 440 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.67
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023