Important compatibility info
Additional Information 2 | Requires special tools for mounting |
Weight | 0.095 kg |
Function | Chain, oil pump drive |
Chain Type | Simplex, Closed chain |
Number of Chain Links | 52 |
Timing Chain Size | G44-AMD1 |
Type | Chain, oil pump drive |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Chain Type | Duplex, with chain lock |
Number of Chain Links | 130 |
Timing Chain Size | D67HP, D67HR |
Function | Timing Chain |
Weight | 1.18 kg |
Additional Information 2 | Requires special tools for mounting |
Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with seal ring |
Number of Connectors / Ports | 2 |
Weight | 0.39 kg |
Type | Sender Unit, fuel tank |
Function | Sender Unit, fuel tank |
Screw length below head | 533 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Shock Absorber, driver cab suspension |
Placement on Vehicle | Rear |
Pipe Diameter | 58 mm. 63 mm |
Min. Length | 272 mm |
Max. Length | 378 mm |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Weight | 2.1 kg |
Operating Mode | Mechanical |
Type | Shock Absorber, driver cab suspension |
Piston conrod diameter | 16 mm |
Mounting points diameter | 20 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.475 kg |
Width | 26 mm |
Outer diameter | 161 mm |
Inner diameter | 30 mm |
Number of Ribs | 4 |
Parameter | 5PK |
Function | Belt Pulley, crankshaft |
Additional Information 2 | with bolts/screws |
Extra Description | ProKit |
Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (26872)
- 4x Febi Centering Bolt, crankshaft pulley (33554)
Important compatibility info
Outer diameter | 74 mm |
Material | Plastic |
Weight | 1.330 kg |
Type | Belt Tensioner, V-ribbed belt |
Width | 87 mm |
Width of castor bearing surface | 39 mm |
Operating Mode | Automatic |
Function | Belt Tensioner, V-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.29 kg |
Material | PA (polyamide) |
Function | Oil Separator, crankcase ventilation |
Extra Description | febi Plus |
Type | Oil Separator, crankcase ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.865 kg |
Placement on Vehicle | Front Axle Right |
Material | Steel |
Paired article numbers | 174505 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Additional Information 2 | without ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | without ball joint |
Steering arm type | Control Arm |
Placement on Vehicle | Front Axle Left |
Weight | 3.865 kg |
Material | Steel |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | 174504 |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 222.5 mm |
Additional Information | with Thrust Bearing |
Additional Information 2 | with bearing |
Type | Repair Kit, kingpin |
Outer diameter | 50 mm |
Paired article numbers | 15901 |
Weight | 5.1 kg |
Function | Repair Kit, kingpin |
Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (35012)
- 1x Febi Bush, steering knuckle (15890)
- 4x Febi Bush, steering knuckle (08524)
- 1x Febi Seal Ring, steering knuckle (05868)
Important compatibility info
Outer diameter | 155 mm |
Inner diameter | 27 mm |
Thickness | 155 mm |
Function | Belt Pulley, crankshaft |
Parameter | 6PK |
Weight | 1.98 kg |
Number of Ribs | 5 |
Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 43133 |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Material | Cast Steel |
Placement on Vehicle | Front Axle Left, Upper |
Weight | 1.44 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Link/Coupling Rod, stabiliser bar |
Length | 590 mm |
Diameter | 120 mm |
Placement on Vehicle | 2nd rear axle |
Type | Link/Coupling Rod, stabiliser bar |
Rod/Strut | Coupling Rod |
Weight | 4.300 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 62 mm |
Weight | 2.244 kg |
Outer diameter | 157 mm |
Inner diameter | 30 mm |
Parameter | 7PK |
Function | Belt Pulley, crankshaft |
Number of Ribs | 6 |
Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Combi Switch Function | with indicator function, with light dimmer function |
Weight | 0.26 kg |
Type | Steering Column Switch |
Function | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Cast Steel |
Placement on Vehicle | Front Axle Right, Upper |
Weight | 1.55 kg |
Paired article numbers | 43134 |
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information 2 | with nut |
Thread Size | M22x1,5 |
External Teeth, Wheel Side | 27 |
Weight | 6.534 kg |
External Teeth, Diff.Side | 25 |
Min. Length | 769 mm |
Wheel Sided Joint Diameter | 84 mm |
Transmission-side joint diameter | 82 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Brake Caliper |
Weight | 5.5 kg |
Paired article numbers | 183318 |
Brake Caliper Type | Brake Caliper (4 pistons) |
Material | Cast Iron |
Placement on Vehicle | Front Axle Left |
Brake caliper piston diameter | 43 mm |
Function | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of mounting bores | 4 |
Weight | 0.505 kg |
Type | Central Slave Cylinder, clutch |
Function | Central Slave Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 435 mm |
Rod/Strut | Coupling Rod |
Pipe Diameter | 36 mm |
Function | Link/Coupling Rod, stabiliser bar |
Weight | 4.0 kg |
Placement on Vehicle | Rear Axle |
Extra Description | ProKit |
External Thread Size | M24 x 1,5, M22 x 1,5 |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023