Important compatibility info
Inner diameter | 228.3 mm |
Rim Hole Number | 5 -Hole |
Bolt Hole Circle Diameter | 108 mm |
Centering Diameter | 63.5 mm |
Function | Brake Drum |
Thickness | 66 mm |
Outer diameter | 271 mm |
Width | 55.5 mm |
Type | Brake Drum |
Max.skimmed drum measure | 230.2 mm |
Number of mounting bores | 2 |
Weight | 6.3 kg |
Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Cable Length | 600 mm |
Number of circuits | 23 |
Plug Type | Female |
Additional Information | with squeeze connector |
Function | Cable Repair Kit, tailgate |
Extra Description | febi Plus |
Weight | 0.220 kg |
Type | Cable Repair Kit, tailgate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 430 mm |
Outer diameter | 480.5 mm |
Width | 22 mm |
Weight | 5.500 kg |
Number of Teeth | 158 |
Function | Ring Gear, flywheel |
Type | Ring Gear, flywheel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 6.586 kg |
External Teeth, Diff.Side | 34 |
Function | Drive Shaft |
Type | Drive Shaft |
Transmission-side joint diameter | 81.5 mm |
Min. Length | 604 mm |
Wheel Sided Joint Diameter | 91 mm |
External Teeth, Wheel Side | 30 |
Placement on Vehicle | Front Axle Right |
Thread Size | M24 x 1,5 |
Additional Information 2 | with nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.8 kg |
Length | 430 mm |
Function | Oil sump |
Extra Description | febi Plus |
Type | Oil sump |
Additional Information | with oil drain plug |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil sump (27300)
- 1x Febi Screw Plug, oil sump (101250)
Important compatibility info
Chain Type | Duplex, Closed chain |
Additional Information 2 | Requires special tools for mounting |
Weight | 0.93 kg |
Function | Timing Chain |
Timing Chain Size | D67ZN |
Number of Chain Links | 124 |
Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Repair Kit, suspension strut support mount |
Material | Rubber/Metal |
Placement on Vehicle | Front Axle Right |
Weight | 1.9 kg |
Paired article numbers | 102748 |
Type | Repair Kit, suspension strut support mount |
Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.227 kg |
Length | 704 mm. 683 mm |
Material | MVQ (silicone rubber) |
Inner diameter | 3 mm |
Function | Hose Line, soot/particulate filter regeneration |
Extra Description | febi Plus |
Type | Hose Line, soot/particulate filter regeneration |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 450 mm |
Thickness | 120 mm |
Number of Connectors / Ports | 2 |
Rated Power | 400 W |
Number of Wings | 6 |
Function | Fan, engine cooling |
Weight | 2.67 kg |
Type | Fan, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.94 kg |
Placement on Vehicle | Left |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber), Rubber/Metal |
Bearing/Mounting Type | Hydro Mount |
Type | Mounting, engine |
Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 11 28 7 549 589 |
Weight | 0.672 kg |
Width of castor bearing surface | 24.5 mm |
Outer diameter | 70 mm |
Operating Mode | Automatic |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Plastic |
Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.82 kg |
Number of Connectors / Ports | 2 |
Placement on Vehicle | both sides |
Bearing/Mounting Type | electrically adjustable hydro mount |
Function | Mounting, engine |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Lower, Rear, inner, Front Axle Right |
Material | Rubber/Metal |
Outer diameter | 71 mm |
Thickness | 80 mm |
Inner diameter | 14 mm |
Shape/Form | slotted |
Type | Mounting, control/trailing arm |
Function | Mounting, control/trailing arm |
Weight | 0.613 kg |
Additional Information 2 | with mounting sleeve |
Caster correction | +3 mm. -3 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Belt Tensioner, v-ribbed belt |
Weight | 0.948 kg |
Outer diameter | 95 mm |
Operating Mode | Automatic |
Width of castor bearing surface | 26 mm |
Track rollers material | Plastic |
Housing material | Aluminium |
Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Repair Kit, driver cab suspension |
Type | Repair Kit, driver cab suspension |
Weight | 1.008 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Brake Disc |
Number of mounting bores | 1 |
Surface | Coated |
Bolt Hole Circle Diameter | 105 mm |
Centering Diameter | 60 mm |
Minimum thickness | 23 mm |
Brake Disc Thickness | 26 mm |
Thickness | 45.5 mm |
Outer diameter | 300 mm |
Placement on Vehicle | Front Axle |
Weight | 8.6 kg |
Rotor Style | Internally Vented |
Rim Hole Number | 5 -Hole |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.21 kg |
Number of Wings | 7 |
Additional Information 2 | with seal ring |
Function | Water Pump, engine cooling |
Water pump impeller material | Plastic |
Seal Material | Rubber |
Material | Grey Cast Iron |
Type | Water Pump, engine cooling |
for OE number | 1399 689 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Transmission-side joint diameter | 79.2 mm |
Wheel Sided Joint Diameter | 83.2 mm |
Function | Drive Shaft |
Type | Drive Shaft |
Additional Information 2 | with screw |
Placement on Vehicle | Front Axle Left |
Min. Length | 580 mm |
Thread Size | M10x1,5 |
Paired article numbers | 180749 |
External Teeth, Wheel Side | 36 |
Weight | 5.338 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.42 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Outer diameter | 147 mm |
Thickness | 85 mm |
Inner diameter | 35 mm |
Number of Holes | 5 |
Bearing Type | Angular Ball Bearing |
Type | Wheel Bearing Kit |
Function | Wheel Bearing Kit |
Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing Kit (47315)
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Weight | 2.759 kg |
Width | 47 mm |
Outer diameter | 81 mm |
Inner diameter | 30 mm |
Bearing Type | Angular Ball Bearing |
Sealing lip material | NBR (nitrile butadiene rubber) |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Additional Information 2 | with integrated magnetic sensor ring, Wheel Bearing integrated into wheel hub, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, engine |
Function | Mounting, engine |
Weight | 4.681 kg |
Placement on Vehicle | Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.2 kg |
Outer diameter | 60 mm |
Bolt Hole Circle Diameter | 106.5 mm |
Number of Holes | 5 |
Outer diameter 1 | 65 mm |
Width | 78 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Bearing Type | Angular Ball Bearing |
Type | Wheel Bearing Kit |
Inner diameter | 30 mm |
Additional Information 2 | with RPM sensor |
Outer diameter 2 | 140 mm |
Function | Wheel Bearing Kit |
Replaces | 19654 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.172 kg |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Paired article numbers | 183067 |
Additional Information | with rubber-metal mounts |
Material | Aluminium |
Placement on Vehicle | Upper, Rear Axle Left, Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Upper Right |
Type | Mounting, engine |
Function | Mounting, engine |
Weight | 1.023 kg |
Bearing/Mounting Type | Rubber-Metal Mount |
Paired article numbers | 184146 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Upper, Rear Axle Right, Rear |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber-metal mounts |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 183063 |
Weight | 1.172 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Tappet, high pressure pump |
Type | Tappet, high pressure pump |
Weight | 0.4 kg |
Inner diameter | 39.44 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M14 x 1,5 |
Function | Sensor, exhaust gas temperature |
Type | Sensor, exhaust gas temperature |
Cable Length | 814 mm |
Weight | 0.063 kg |
Number of Connectors / Ports | 2 |
Placement on Vehicle | after soot particulate filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with mounting sleeve |
Weight | 1.390 kg |
Type | Housing, water pump |
Function | Housing, water pump |
Seal Material | Rubber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber/Metal |
Bearing/Mounting Type | Hydro Mount |
Function | Mounting, engine |
Weight | 1.4 kg |
Type | Mounting, engine |
Placement on Vehicle | Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 194708 |
Function | Control/Trailing Arm, wheel suspension |
Weight | 3.17 kg |
Steering arm type | Control Arm |
Additional Information 2 | with bearing |
Material | Sheet Steel |
Type | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Rear Axle Right, Lower, Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023