Proud to be a UK-based company
Contact us
Important compatibility info
| Wheel Sided Joint Diameter | 80.9 mm |
| ABS Ring Diameter | 81 mm |
| Additional Information 2 | with screw |
| Placement on Vehicle | Front Axle Right |
| Min. Length | 610 mm |
| Mounting bores distance | 6 mm |
| Weight | 6.494 kg |
| Bolt Hole Circle Diameter | 104.1 mm |
| Bore Diameter | 11 mm |
| External Teeth, Wheel Side | 38 |
| Thread Size | M16 x 1,5 |
| Transmission-side joint diameter | 81.5 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.12
Important compatibility info
| Weight | 1.27 kg |
| Material | Cast Aluminium |
| Number of Teeth | 6 |
| Number of Wings | 6 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.12
Important compatibility info
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 30516 |
| Placement on Vehicle | Front Axle Right, Lower, Front |
| Weight | 1.94 kg |
| Function | Control/Trailing Arm, wheel suspension |
| Rod/Strut | Pull Rod |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with bearing, with screw |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.12
Important compatibility info
| Number of Connectors / Ports | 2 |
| Cable Length | 1082 mm |
| Function | Sensor, exhaust gas temperature |
| Spanner Size | 17 |
| External Thread Size | M14 x 1,5 |
| Weight | 0.07 kg |
| Type | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.11
Important compatibility info
| Inner diameter | 228.3 mm |
| Rim Hole Number | 5 -Hole |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 63.5 mm |
| Function | Brake Drum |
| Thickness | 66 mm |
| Outer diameter | 271 mm |
| Width | 55.5 mm |
| Type | Brake Drum |
| Max.skimmed drum measure | 230.2 mm |
| Number of mounting bores | 2 |
| Weight | 6.3 kg |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.11
Important compatibility info
| Inner diameter | 430 mm |
| Outer diameter | 480.5 mm |
| Width | 22 mm |
| Weight | 5.500 kg |
| Number of Teeth | 158 |
| Function | Ring Gear, flywheel |
| Type | Ring Gear, flywheel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.09
Important compatibility info
| Weight | 6.586 kg |
| External Teeth, Diff.Side | 34 |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Transmission-side joint diameter | 81.5 mm |
| Min. Length | 604 mm |
| Wheel Sided Joint Diameter | 91 mm |
| External Teeth, Wheel Side | 30 |
| Placement on Vehicle | Front Axle Right |
| Thread Size | M24 x 1,5 |
| Additional Information 2 | with nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.08
Important compatibility info
| Outer diameter | 450 mm |
| Thickness | 120 mm |
| Number of Connectors / Ports | 2 |
| Rated Power | 400 W |
| Number of Wings | 6 |
| Function | Fan, engine cooling |
| Weight | 2.67 kg |
| Type | Fan, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.08
Important compatibility info
| Weight | 2.8 kg |
| Length | 430 mm |
| Function | Oil sump |
| Extra Description | febi Plus |
| Type | Oil sump |
| Additional Information | with oil drain plug |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil sump (27300)
- 1x Febi Screw Plug, oil sump (101250)
£66.08
Important compatibility info
| Function | Repair Kit, suspension strut support mount |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle Right |
| Weight | 1.9 kg |
| Paired article numbers | 102748 |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.08
Important compatibility info
| Function | Oil Cooler, automatic transmission |
| for OE number | 096 409 061 E |
| Weight | 0.78 kg |
| Type | Oil Cooler, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.08
Important compatibility info
| for OE number | 11 28 7 549 589 |
| Weight | 0.672 kg |
| Width of castor bearing surface | 24.5 mm |
| Outer diameter | 70 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.08
Important compatibility info
| Weight | 0.227 kg |
| Length | 704 mm. 683 mm |
| Material | MVQ (silicone rubber) |
| Inner diameter | 3 mm |
| Function | Hose Line, soot/particulate filter regeneration |
| Extra Description | febi Plus |
| Type | Hose Line, soot/particulate filter regeneration |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.08
Important compatibility info
| Weight | 0.94 kg |
| Placement on Vehicle | Left |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber), Rubber/Metal |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.08
Important compatibility info
| Function | Belt Tensioner, v-ribbed belt |
| Weight | 0.948 kg |
| Outer diameter | 95 mm |
| Operating Mode | Automatic |
| Width of castor bearing surface | 26 mm |
| Track rollers material | Plastic |
| Housing material | Aluminium |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.07
Important compatibility info
| Function | Brake Disc |
| Number of mounting bores | 1 |
| Surface | Coated |
| Bolt Hole Circle Diameter | 105 mm |
| Centering Diameter | 60 mm |
| Minimum thickness | 23 mm |
| Brake Disc Thickness | 26 mm |
| Thickness | 45.5 mm |
| Outer diameter | 300 mm |
| Placement on Vehicle | Front Axle |
| Weight | 8.6 kg |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.06
Important compatibility info
| Function | Repair Kit, driver cab suspension |
| Type | Repair Kit, driver cab suspension |
| Weight | 1.008 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.06
Important compatibility info
| Weight | 2.21 kg |
| Number of Wings | 7 |
| Additional Information 2 | with seal ring |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| Material | Grey Cast Iron |
| Type | Water Pump, engine cooling |
| for OE number | 1399 689 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.04
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Rear, inner, Front Axle Right |
| Material | Rubber/Metal |
| Outer diameter | 71 mm |
| Thickness | 80 mm |
| Inner diameter | 14 mm |
| Shape/Form | slotted |
| Type | Mounting, control/trailing arm |
| Function | Mounting, control/trailing arm |
| Weight | 0.613 kg |
| Additional Information 2 | with mounting sleeve |
| Caster correction | +3 mm. -3 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.03
Important compatibility info
| Weight | 0.82 kg |
| Number of Connectors / Ports | 2 |
| Placement on Vehicle | both sides |
| Bearing/Mounting Type | electrically adjustable hydro mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.03
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023