Important compatibility info
Outer diameter | 70 mm |
Operating Mode | Automatic |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Plastic |
Width of castor bearing surface | 26 mm |
Weight | 1.630 kg |
Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.5253 kg |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 14245 |
Placement on Vehicle | Front Axle Left, Lower |
Function | Control/Trailing Arm, wheel suspension |
Replaces | 06499 |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.053 kg |
Placement on Vehicle | Rear Axle Right |
Paired article numbers | 109561 |
Number of Connectors / Ports | 2 |
Cable Length | 896 mm |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.574 kg |
Placement on Vehicle | Rear Axle |
Width | 57 mm |
Outer diameter | 254 mm |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 5 mm |
Type | Brake Shoe Set |
Function | Brake Shoe Set |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Operating Mode | Electric-pneumatic |
Valve type | Solenoid Valve |
Function | EGR valve, exhaust control |
Weight | 0.4 kg |
Type | EGR valve, exhaust control |
for OE number | 51.25902.0130 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with piston |
Weight | 9.4 kg |
Type | Bellow, air suspension |
Function | Bellow, air suspension |
Rolling piston material | Plastic |
External Thread Size | M22 x 1,5, M12 x 1,75, M16 x 2 |
Outer diameter | 258 mm. 203 mm |
Thickness | 385 mm. 690 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Gasket, cylinder head cover |
Weight | 0.05 kg |
Paired article numbers | 179722 |
Function | Gasket, cylinder head cover |
Material | ACM (Polyacrylate) |
Placement on Vehicle | Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.105 kg |
Placement on Vehicle | transmission sided |
Material | FPM (fluoride rubber) |
Outer diameter | 105 mm |
Thickness | 13 mm. 18.5 mm |
Inner diameter | 85 mm |
Type | Shaft Seal, manual transmission flange |
Function | Shaft Seal, manual transmission flange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 5.2 kg |
Rotor Style | Solid |
Placement on Vehicle | Rear Axle |
Outer diameter | 288 mm |
Thickness | 45 mm |
Brake Disc Thickness | 12 mm |
Minimum thickness | 10 mm |
Bolt Hole Circle Diameter | 115 mm |
Centering Diameter | 70 mm |
Surface | Coated |
Number of mounting bores | 1 |
Type | Brake Disc Rotor |
Function | Brake Disc |
Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 230 mm |
Weight | 0.030 kg |
Width | 105 mm |
Filter type | Pollen Filter |
Height | 20 mm |
Function | Filter, cabin air |
Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Bushing, leaf spring |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 45 mm |
Material | Rubber/Metal |
Outer diameter | 64 mm |
Inner diameter | 24 mm |
Weight | 0.740 kg |
Type | Bushing, leaf spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.095 kg |
Length | 266 mm. 155 mm |
Inner diameter | 6 mm |
Eject Force | 75 N |
Function | Gas Spring, boot/cargo area |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Part number of the recommended special tools | ADK85501 |
Chain Type | Simplex, Closed chain |
Number of Chain Links | 120 |
Function | Timing Chain Kit |
Weight | 1.45 kg |
Type | Timing Chain Kit |
Timing Chain Size | G53HP, G53HR |
Extra Description | Standard Medium Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (23778)
- 1x Febi Tensioner, timing chain (28458)
- 1x Febi Guide, timing chain (31543)
- 1x Febi Guide, timing chain (31544)
- 1x Febi Sprocket, crankshaft (31545)
- 1x Febi Gear/Sprocket, camshaft (31546)
- 1x Febi Gasket, timing case (32153)
- 1x Febi Shaft Seal, crankshaft (32154)
Important compatibility info
Height | 34 mm |
Outer diameter | 37 mm |
Inner diameter | 16 mm |
Weight | 0.063 kg |
Function | Bush, driver cab suspension |
Type | Bush, driver cab suspension |
Material | Rubber/Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Teeth, Diff.Side | 28 |
Placement on Vehicle | Front Axle Left |
Type | Drive Shaft |
Min. Length | 592 mm |
Weight | 6.768 kg |
Transmission-side joint diameter | 86 mm |
Wheel Sided Joint Diameter | 92.2 mm |
Function | Drive Shaft |
Thread Size | M10x1,5 |
Additional Information 2 | with screw |
External Teeth, Wheel Side | 40 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Steel |
Outer diameter | 276 mm |
Length | 583 mm |
Weight | 9.40 kg |
Capacity | 30 l |
Operating Pressure | 15.5 bar |
Function | Air Tank, compressed-air system |
Number of Connectors / Ports | 4 |
Internal Thread Size | M22 x 1,5 |
Type | Air Tank, compressed-air system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front |
Weight | 1.236 kg |
for OE number | 12361-0D120 |
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, engine |
Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.33 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Rolling Bearing, suspension strut support mount |
Type | Rolling Bearing, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Cone Size 2 | 21 mm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Cone Size | 17 mm |
Additional Information | with lock nut |
Paired article numbers | 185473 |
Additional Information 2 | with ball joint, with bearing |
Material | Aluminium |
Steering arm type | Control Arm |
Weight | 2.617 kg |
External Thread Size | M14 x 1,5 |
Placement on Vehicle | Lower, Front Axle Right, Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Cylinder Head Cover |
Additional Information | with gasket/seal |
Material | Plastic |
Colour | Black |
Weight | 1.600 kg |
Heating / Cooling | with jiggle pin |
Type | Cylinder Head Cover |
Function | Cylinder Head Cover |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023