Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 9.78 kg |
| Thickness | 120 mm |
| Function | Bush, parabolic spring |
| Width | 165 mm. 135 mm |
| Length | 230 mm. 210 mm |
| Type | Bush, parabolic spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.28
Important compatibility info
| Placement on Vehicle | before soot particulate filter |
| Number of Connectors / Ports | 2 |
| Weight | 0.054 kg |
| Cable Length | 280 mm |
| Type | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
| Function | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.26
Important compatibility info
| Housing Type | without housing |
| Additional Information | with gasket/seal |
| Weight | 0.07 kg |
| Number of Connectors / Ports | 5 |
| Resistor Type | Hot-film Sensor |
| Function | Mass Air Flow Sensor |
| Type | Mass Air Flow Sensor |
| Length | 96 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.25
Important compatibility info
| Wheel Sided Joint Diameter | 88.9 mm |
| Placement on Vehicle | Front Axle Right |
| Transmission-side joint diameter | 82.3 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Min. Length | 922 mm |
| External Teeth, Diff.Side | 26 |
| Weight | 9.140 kg |
| External Teeth, Wheel Side | 36 |
| Paired article numbers | 180786 |
| Thread Size | M10x1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.22
Important compatibility info
| Weight | 6.85 kg |
| Rotor Style | internally vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 280 mm |
| Thickness | 44 mm |
| Brake Disc Thickness | 24 mm |
| Minimum thickness | 22 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.22
Important compatibility info
| Weight | 0.420 kg |
| Number of Connectors / Ports | 2. 4 |
| Opening Temperature | 100 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Additional Information 2 | with Temperature Switch |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.20
Important compatibility info
| Weight | 0.702 kg |
| Internal Thread Size | M16 x 1,5, M22 x 1,5 |
| Number of Connectors / Ports | 4 |
| Function | Relay Valve |
| Type | Relay Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.20
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Cable Length | 680 mm |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
| Weight | 0.077 kg |
| Number of Connectors / Ports | 2 |
| Placement on Vehicle | Exhaust Manifold |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.19
Important compatibility info
| Weight | 0.734 kg |
| Chain Type | Closed chain |
| Number of Chain Links | 130 |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Timing Chain Size | G53HP, G53HR, G53HC, G53AM |
| Extra Description | Standard Medium Kit |
| Replaces | 33081 |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (17617)
- 1x Febi Tensioner, timing chain (12119)
- 1x Febi Guide Rails Kit, timing chain (46414)
- 1x Febi Gasket Kit, crankcase (46470)
£63.19
Important compatibility info
| Spanner Size | 22 |
| Weight | 0.106 kg |
| Cable Length | 600 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.17
Important compatibility info
| Weight | 0.21 kg |
| Extra Description | febi Plus |
| Function | Control Unit, heating/ventilation |
| Type | Control Unit, heating/ventilation |
| Number of Connectors / Ports | 2. 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.16
Important compatibility info
| Weight | 0.90 kg |
| Track rollers material | Plastic |
| Housing material | Aluminium |
| Operating Mode | Automatic |
| Outer diameter | 82.4 mm |
| Function | Belt Tensioner, v-ribbed belt |
| Type | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 28.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.16
Important compatibility info
| Outer diameter | 165 mm |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
| Parameter | 4PK + 7PK |
| Number of Ribs | 7 |
| Weight | 2.86 kg |
| Inner diameter | 31 mm |
| Thickness | 54 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.15
Important compatibility info
| Weight | 2.0 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 73 mm |
| Outer diameter | 133.5 mm |
| Inner diameter | 35 mm |
| Number of Holes | 3 |
| Bolt Hole Circle Diameter | 112 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.15
Important compatibility info
| Weight | 0.321 kg |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 42 |
| Function | Timing Chain Kit |
| Extra Description | Basic Short Kit |
| Timing Chain Size | G67AM, G67HP, G67HR |
| Type | Timing Chain Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (25227)
- 1x Febi Tensioner, timing chain (32518)
£63.15
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with nut |
| Thread Size | M16x1,5 |
| Bolt Hole Circle Diameter | 94 mm |
| Wheel Sided Joint Diameter | 89 mm |
| Min. Length | 472 mm |
| Weight | 4.816 kg |
| External Teeth, Wheel Side | 36 |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Transmission-side joint diameter | 74.2 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.15
Important compatibility info
| Weight | 0.889 kg |
| Outer diameter | 73 mm |
| Number of Ribs | 6 |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Width of castor bearing surface | 25 mm |
| Type | Belt Tensioner, v-ribbed belt |
| for OE number | 022 145 299 D |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.15
Important compatibility info
| Weight | 4.05 kg |
| Placement on Vehicle | Front Axle, Steered trailing axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 559 mm |
| Min. Length | 376 mm |
| Pipe Diameter | 76 mm. 63 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 20 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.15
Important compatibility info
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
| Weight | 0.984 kg |
| Inner length 2 | 879 mm |
| Inner length 1 | 855 mm |
| Outer length 1 | 1160 mm |
| Outer length 2 | 1202 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.15
Important compatibility info
| Weight | 0.284 kg |
| Number of Connectors / Ports | 13 |
| Combi Switch Function | with indicator function, with hazard warning light function, with headlight flasher, with high beam function |
| Type | Steering Column Switch |
| Function | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.15
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023