Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 6.420 kg |
| Centering Diameter | 90 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Minimum thickness | 10 mm |
| Brake Disc Thickness | 12 mm |
| Rotor Style | Solid |
| Bolt Hole Circle Diameter | 130 mm |
| Thickness | 71.5 mm |
| Outer diameter | 305 mm |
| Placement on Vehicle | Rear Axle |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.27
Important compatibility info
| Placement on Vehicle | before soot particulate filter |
| Number of Connectors / Ports | 2 |
| Weight | 0.054 kg |
| Cable Length | 280 mm |
| Type | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
| Function | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.26
Important compatibility info
| Housing Type | without housing |
| Additional Information | with gasket/seal |
| Weight | 0.07 kg |
| Number of Connectors / Ports | 5 |
| Resistor Type | Hot-film Sensor |
| Function | Mass Air Flow Sensor |
| Type | Mass Air Flow Sensor |
| Length | 96 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.25
Important compatibility info
| Weight | 0.420 kg |
| Number of Connectors / Ports | 2. 4 |
| Opening Temperature | 100 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Additional Information 2 | with Temperature Switch |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.20
Important compatibility info
| Weight | 0.702 kg |
| Internal Thread Size | M16 x 1,5, M22 x 1,5 |
| Number of Connectors / Ports | 4 |
| Function | Relay Valve |
| Type | Relay Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.20
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Cable Length | 680 mm |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
| Weight | 0.077 kg |
| Number of Connectors / Ports | 2 |
| Placement on Vehicle | Exhaust Manifold |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.19
Important compatibility info
| Weight | 0.734 kg |
| Chain Type | Closed chain |
| Number of Chain Links | 130 |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Timing Chain Size | G53HP, G53HR, G53HC, G53AM |
| Extra Description | Standard Medium Kit |
| Replaces | 33081 |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (17617)
- 1x Febi Tensioner, timing chain (12119)
- 1x Febi Guide Rails Kit, timing chain (46414)
- 1x Febi Gasket Kit, crankcase (46470)
£63.19
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Bore Diameter | 14 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Telescopic Shock Absorber |
| Weight | 2.130 kg |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Mounting bores distance | 432 mm |
| Max. Length | 432 mm |
| Min. Length | 302 mm |
| Pipe Diameter | 60.5 mm. 51 mm |
| Piston conrod diameter | 15 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.18
Important compatibility info
| Paired article numbers | 182437 |
| External Teeth, Diff.Side | 25 |
| Type | Drive Shaft |
| Transmission-side joint diameter | 81.5 mm |
| Wheel Sided Joint Diameter | 91 mm |
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M24x1,5 |
| External Teeth, Wheel Side | 28 |
| Weight | 6.726 kg |
| Function | Drive Shaft |
| Min. Length | 596 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.18
Important compatibility info
| Spanner Size | 22 |
| Weight | 0.106 kg |
| Cable Length | 600 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.17
Important compatibility info
| Weight | 0.21 kg |
| Extra Description | febi Plus |
| Function | Control Unit, heating/ventilation |
| Type | Control Unit, heating/ventilation |
| Number of Connectors / Ports | 2. 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.16
Important compatibility info
| Weight | 2.0 kg |
| Placement on Vehicle | Rear Axle |
| Width | 32 mm |
| Outer diameter | 180 mm |
| Inspection Tag | ECE R90 Approved |
| Mounting Type | Pre-assembled |
| Function | Brake Shoe Set |
| Piston Diameter | 20.6 mm |
| Type | Brake Shoe Set |
| Additional Information | with accessories, with wheel brake cylinder, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.16
Important compatibility info
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 38701 |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Weight | 3.41 kg |
| Placement on Vehicle | Front Axle Left, Lower |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint (28600)
- 1x Febi Mounting, control/trailing arm (22635)
- 1x Febi Mounting, control/trailing arm (22636)
£63.16
Important compatibility info
| Assignment plan scheme number | 1 |
| Working length | 4.0 m |
| Weight | 1.720 kg |
| DIN / ISO | 12098, 1185, 3731 |
| Type | Adaptor, electric filament |
| Temperature range from | -40 °C |
| Material | PU (Polyurethane) |
| Voltage | 24 V |
| Additional Information 2 | with plug |
| Function | Adaptor, electric filament |
| Port / Connector type | 15 to 2x7 |
| Number of Connectors / Ports | 15. 7 |
| Version | Aftermarket |
| Connecting plug material | Plastic |
| Temperature range to | 85 °C |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.15
Important compatibility info
| for OE number | 5 264 546 |
| Weight | 0.855 kg |
| Function | Oil Pump |
| Type | Oil Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.15
Important compatibility info
| Outer length 1 | 1130 mm |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Placement on Vehicle | Right |
| Weight | 0.835 kg |
| Inner length 1 | 835 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.15
Important compatibility info
| Cone Size | 32 mm |
| Length | 387 mm |
| Rod/Strut | Push Rod |
| Pipe Diameter | 36 mm |
| Placement on Vehicle | Front Axle, from the steering gear to the 1st idler arm |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| External Thread Size | M27 x 1,5 |
| Weight | 4.18 kg |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.15
Important compatibility info
| Additional Information | with rubber-metal mount |
| Placement on Vehicle | Front Axle |
| Length | 420 mm |
| Diameter | 1 mm |
| Rod/Strut | Guide Rod |
| Bore Diameter | 40 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Weight | 3.350 kg |
| Type | Link/Coupling Rod, stabiliser bar |
| Internal Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.15
Important compatibility info
| Weight | 1.4 kg |
| Outer diameter | 161 mm |
| Thickness | 26 mm |
| Inner diameter | 30 mm |
| Number of Ribs | 4 |
| Parameter | 5PK |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.15
Important compatibility info
| Weight | 0.845 kg |
| Type | EGR Valve |
| Function | EGR Valve |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.15
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023