Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.203 kg |
| Type | Connecting Rod, air compressor |
| Function | Connecting Rod, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.34
Important compatibility info
| Number of Ribs | 6 |
| Weight | 0.49 kg |
| Additional Information 2 | with lid |
| Outer diameter | 59 mm |
| Function | Alternator Freewheel Clutch |
| Inner diameter | 14 mm |
| Type | Alternator Freewheel Clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.33
Important compatibility info
| Weight | 0.430 kg |
| Function | Water Pump, engine cooling |
| Seal Material | Rubber |
| Water pump impeller material | Plastic |
| Number of Wings | 8 |
| Number of Teeth | 29 |
| Material | Cast Aluminium |
| Type | Water Pump, engine cooling |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.33
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 16 mm |
| Weight | 1.256 kg |
| Steering arm type | Control Arm |
| Additional Information 2 | with ball joint, with bearing |
| Material | Aluminium |
| Additional Information | with fastening/mounting material, with holder |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, Centre |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (175387)
- 1x Febi Bolt, control arm (43442)
£61.32
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Material | Rubber/Metal |
| Additional Information 2 | with ball bearing |
| Weight | 0.880 kg |
| Type | Repair Kit, suspension strut support mount |
| Function | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (185942)
- 1x Febi Rolling Bearing, suspension strut support mount (188736)
£61.32
Important compatibility info
| Weight | 1.55 kg |
| Outer diameter | 142 mm |
| Thickness | 72 mm |
| Inner diameter | 44 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Function | Wheel Hub |
| Type | Wheel Hub |
| Additional Information 2 | without wheel bearing |
| Bearing Type | Tapered Roller Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.32
Important compatibility info
| Weight | 3.0 kg |
| Function | Bush Set, axle beam |
| Placement on Vehicle | Rear Axle, Front |
| Type | Bush Set, axle beam |
| Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Bushing, axle beam (22450)
- 2x Febi Bushing, axle cross member (22487)
- 2x Febi Screw (22488)
£61.31
Important compatibility info
| Material | Cast Aluminium |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 181182 |
| Brake caliper piston diameter | 60 mm |
| Weight | 2.6 kg |
| Placement on Vehicle | Front Axle Right |
| Function | Brake Caliper |
| Type | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.30
Important compatibility info
| Internal Teeth, wheel side | 25 |
| Weight | 2.090 kg |
| Type | Joint Kit, drive shaft |
| External Teeth, Wheel Side | 37 |
| Function | Joint Kit, drive shaft |
| Thread Size | M16 x 1,5 |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Bolt Head/Nut Design | Hexagon Socket |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.30
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 550 mm |
| Diameter | 1 mm |
| Additional Information | with rubber-metal mount |
| Thickness | 80 mm |
| Rod/Strut | Coupling Rod |
| Weight | 4.722 kg |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.27
Important compatibility info
| Hole Spacing | 220 mm |
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Bearing Type | Rolling Bearing |
| Weight | 3.900 kg |
| Inner diameter | 75 mm |
| Additional Information 2 | with rolling bearing |
| Additional Information | with fastening/mounting material |
| Length | 264 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.26
Important compatibility info
| Weight | 8.870 kg |
| Rotor Style | Solid |
| Rim Hole Number | 6 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 315 mm |
| Thickness | 84 mm |
| Brake Disc Thickness | 18 mm |
| Minimum thickness | 16.4 mm |
| Bolt Hole Circle Diameter | 139.7 mm |
| Centering Diameter | 108 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.25
Important compatibility info
| Weight | 0.036 kg |
| Number of Connectors / Ports | 3 |
| Function | Sensor, compressed-air system |
| External Thread Size | M16 x 1,5 |
| Type | Sensor, compressed-air system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.25
Important compatibility info
| Weight | 1.4 kg |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.23
Important compatibility info
| Weight | 1.98 kg |
| Placement on Vehicle | Front Axle Right, Wheel Side |
| Function | Joint Kit, drive shaft |
| Type | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (30023)
- 1x Febi Clamping Clip (38758)
- 1x Febi Clamping Clip (38765)
- 1x Febi Nut, kingpin (30028)
- 1x Febi Molybdenum Grease (02582)
£61.21
Important compatibility info
| Function | Oil Cooler, engine oil |
| Weight | 0.410 kg |
| Type | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.21
Important compatibility info
| Weight | 0.77 kg |
| Width | 44 mm |
| Operating Mode | Automatic |
| Housing material | Metal |
| Function | Belt Tensioner, v-ribbed belt |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.20
Important compatibility info
| Centering Diameter | 59 mm |
| Weight | 6.88 kg |
| Rotor Style | Internally Vented |
| Thickness | 43.4 mm |
| Placement on Vehicle | Front Axle |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Surface | Coated |
| Bolt Hole Circle Diameter | 98 mm |
| Minimum thickness | 24.2 mm |
| Brake Disc Thickness | 26 mm |
| Outer diameter | 281 mm |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.19
Important compatibility info
| Function | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Placement on Vehicle | Left Front |
| Weight | 0.838 kg |
| Type | Mounting, engine |
| for OE number | 56 82 504 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.18
Important compatibility info
| Type | Belt Tensioner, v-ribbed belt |
| Operating Mode | Automatic |
| Width of castor bearing surface | 26 mm |
| Outer diameter | 70 mm |
| Material | Plastic |
| Function | Belt Tensioner, V-ribbed belt |
| Weight | 0.478 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Weight | 4.7 kg |
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 42433 |
| Cone Size | 18 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Internal Thread Size | M12 x 1,25 |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Number of Chain Links | 106 |
| Timing Chain Size | D67ZN |
| Chain Type | Duplex, with chain lock |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| for OE number | 102 050 10 11 S5 |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (09231)
- 1x Febi Tensioner, timing chain (01050)
£61.17
Important compatibility info
| Number of Holes | 3 |
| Number of Ribs | 5 |
| Function | Belt Pulley, crankshaft |
| Outer diameter | 167 mm |
| Material | Rubber/Metal |
| Parameter | 6PK |
| Weight | 2.420 kg |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Type | Control Unit, glow time |
| Weight | 0.047 kg |
| Function | Control Unit, glow time |
| Extra Description | febi Plus |
| Number of Connectors / Ports | 8 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Weight | 4.089 kg |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Placement on Vehicle | Front Axle Left, Lower, Rear |
| Additional Information | with nuts, with fastening/mounting material |
| Paired article numbers | 40366 |
| Material | Cast Steel |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (30255)
- 1x Febi Nut (06877)
- 1x Febi Camber Correction Screw (21560)
- 1x Febi Nut (21557)
£61.17
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 62 mm |
| Outer diameter | 78 mm |
| Inner diameter | 30 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Weight | 3.620 kg |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Internal Thread Size | M12 x 1,25 |
| Weight | 4.68 kg |
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 42432 |
| Cone Size | 18 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Function | EGR Valve |
| Weight | 0.532 kg |
| for OE number | 11 71 7 804 378 |
| Type | EGR Valve |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Weight | 0.07 kg |
| Spanner Size | 17 |
| Number of Connectors / Ports | 2 |
| Cable Length | 1083 mm |
| Function | Sensor, exhaust gas temperature |
| Placement on Vehicle | Catalytic Converter |
| Type | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Function | Guide Rails Kit, timing chain |
| Type | Guide Rails Kit, timing chain |
| Weight | 0.43 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Rim Hole Number | 10 -Hole |
| Placement on Vehicle | Front Axle |
| Brake Disc Type | Internally Vented |
| Minimum thickness | 28 mm |
| Thickness | 112.8 mm |
| Outer diameter | 330 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 95 mm |
| Number of mounting bores | 3 |
| Surface | Coated |
| Function | Brake Disc |
| Weight | 15.65 kg |
| Brake Disc Thickness | 34 mm |
| Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
| Weight | 0.984 kg |
| Inner length 2 | 879 mm |
| Inner length 1 | 855 mm |
| Outer length 1 | 1160 mm |
| Outer length 2 | 1202 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Hole Spacing | 340 mm |
| Type | Link/Coupling Rod, stabiliser bar |
| Placement on Vehicle | Rear Axle, Rear Axle Left, Rear Axle Right |
| Function | Link/Coupling Rod, stabiliser bar |
| Length | 340 mm |
| Diameter | 125 mm |
| Thickness | 35 mm |
| Rod/Strut | Coupling Rod |
| Bore Diameter | 75 mm |
| Weight | 4.300 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Weight | 0.08 kg |
| Operating Mode | Electric |
| Number of Connectors / Ports | 2 |
| Function | Pressure Converter |
| Extra Description | febi Plus |
| Type | Pressure Converter |
| for OE number | 46813570 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Internal Thread Size | M12 x 1,5 |
| Voltage | 24 V |
| Function | Solenoid Valve |
| Type | Solenoid Valve |
| Weight | 0.376 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Outer diameter | 27 mm |
| Opening Temperature | 82 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Housing Type | with housing |
| Weight | 0.35 kg |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Type | Alternator Freewheel Clutch |
| Weight | 0.638 kg |
| Number of Ribs | 6 |
| Function | Alternator Freewheel Clutch |
| Width | 56 mm |
| Outer diameter | 58 mm |
| Inner diameter | 17 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Weight | 0.294 kg |
| Chain Type | Duplex, Closed chain |
| Number of Chain Links | 102 |
| Timing Chain Size | D67ZN |
| Function | Timing Chain |
| Additional Information 2 | Requires special tools for mounting |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Thread Size | M22x1,5 |
| Additional Information 2 | with nut |
| Placement on Vehicle | Front Axle Left |
| Transmission-side joint diameter | 81.5 mm |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Wheel Sided Joint Diameter | 82.0 mm |
| Min. Length | 595 mm |
| External Teeth, Diff.Side | 34 |
| External Teeth, Wheel Side | 26 |
| Weight | 5.744 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Parameter | 7 PK |
| Type | Belt Pulley, crankshaft |
| Width | 30 mm |
| Outer diameter | 163 mm |
| Inner diameter | 38 mm |
| Weight | 1.495 kg |
| Function | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Width of castor bearing surface | 46 mm |
| Width | 72 mm |
| Material | Metal |
| Outer diameter | 75 mm |
| Inner diameter | 12 mm |
| Mounting points diameter | 12 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Weight | 1.441 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Weight | 0.353 kg |
| Extra Description | Basic Short Kit |
| Additional Information 2 | Requires special tools for mounting |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 58 |
| Type | Chain Kit, oil pump drive |
| Function | Chain Kit, oil pump drive |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Chain, oil pump drive (31115)
- 1x Febi Chain Tensioner, oil pump drive (184003)
- 1x Febi Rail, oil pump drive chain (184004)
- 1x Febi Rail, oil pump drive chain (183482)
£61.17
Important compatibility info
| Weight | 1.180 kg |
| Material | Cast Aluminium |
| Number of Wings | 6 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Material | Metal |
| Outer diameter | 70 mm |
| Inner diameter | 14 mm |
| Width | 52 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Mounting points diameter | 10 mm |
| Weight | 0.497 kg |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 29 mm |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Weight | 2.0 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 73 mm |
| Outer diameter | 133.5 mm |
| Inner diameter | 35 mm |
| Number of Holes | 3 |
| Bolt Hole Circle Diameter | 112 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Length | 178 mm |
| Height | 59 mm |
| Width | 125 mm |
| Number of Ribs | 10 |
| Function | Oil Cooler, engine oil |
| Additional Information | with gasket/seal |
| Weight | 1.22 kg |
| Type | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Material | Metal |
| Operating Mode | Automatic |
| Weight | 0.206 kg |
| Type | Vibration Damper, v-ribbed belt |
| Function | Vibration Damper, V-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Placement on Vehicle | Front Axle |
| Cone Size | 30 mm |
| Pipe Diameter | 48 mm |
| Function | Centre Rod Assembly |
| Length | 1040 mm |
| Outer diameter | 48 mm |
| Rod/Strut | Push Rod |
| Weight | 8.210 kg |
| Extra Description | ProKit |
| Internal Thread Size | M30 x 1,5 RHT |
| External Thread Size | M24 x 1,5 |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Weight | 3.440 kg |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 372 mm |
| Min. Length | 326 mm |
| Pipe Diameter | 84 mm. 41 mm |
| Mounting points diameter | 14 mm |
| Function | Shock Absorber, driver cab suspension |
| Placement on Vehicle | Rear |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Width | 38.5 mm |
| Outer diameter | 150 mm |
| Inner diameter | 85 mm |
| Weight | 2.616 kg |
| Bearing Type | Tapered Roller Bearing |
| Type | Wheel Bearing |
| Function | Wheel Bearing |
| Placement on Vehicle | Rear Axle, inner |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023