Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.612 kg |
| Height | 166 mm |
| Width | 144 mm |
| Inspection Tag | EMC, ADR |
| Rated Power | 12 W |
| Light Design | LED |
| Cable Length | 260 mm |
| Fastening Type | 3-point attachment |
| Voltage from | 9 V |
| Voltage to | 30 V |
| Protection Type (IP Code) | IP67 |
| Type | Rotating Beacon |
| Fulfils ECE norm | R65, R10 |
| Temperature range from | -30 °C |
| Temperature range to | 50 °C |
| Function | Rotating Beacon |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| Min. Length | 598 mm |
| External Teeth, Diff.Side | 22 |
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M24x1,5 |
| External Teeth, Wheel Side | 30 |
| Weight | 6.744 kg |
| Wheel Sided Joint Diameter | 88.9 mm |
| Transmission-side joint diameter | 93.9 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| Additional Information 2 | with lid |
| Function | Alternator Freewheel Clutch |
| Number of Ribs | 7 |
| Inner diameter | 17 mm |
| Outer diameter | 53 mm |
| Weight | 0.344 kg |
| Type | Alternator Freewheel Clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 4.089 kg |
| Paired article numbers | 40365 |
| Steering arm type | Control Arm |
| Material | Cast Steel |
| Placement on Vehicle | Front Axle Right, Lower, Rear |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with bearing, with ball joint |
| Additional Information | with nuts, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (30256)
- 1x Febi Nut (06877)
- 1x Febi Camber Correction Screw (21560)
- 1x Febi Nut (21557)
£62.16
Important compatibility info
| Weight | 0.805 kg |
| Function | Timing Chain Kit |
| Number of Chain Links | 130 |
| Chain Type | Silent Chain, Closed chain |
| Replaces | 46792 |
| Type | Timing Chain Kit |
| Additional Information | with chain tensioner, with slide rails |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Warning! This timing chain kit can only be installed if the timing chain drive system has been not modified by the OE manufacturer. This can be established by checking the service history of the vehicle or by checking the OE part numbers on the modified camshaft adjusters (03C 109 571 K / 03C 109 088 G). Please note our technical information.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Guide, timing chain (36085)
- 1x Febi Guide, timing chain (36224)
- 1x Febi Timing Chain (40390)
- 1x Febi Tensioner, timing chain (36484)
£62.16
Important compatibility info
| Weight | 1.707 kg |
| Placement on Vehicle | Front Axle Right, Lower, Front |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 21443 |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with lock nut |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with bearing |
| Bearing/Mounting Type | Rubber-Metal Mount |
| External Thread Size | M14 x 1,5 |
| Cone Size | 19 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| Weight | 0.353 kg |
| Extra Description | Basic Short Kit |
| Additional Information 2 | Requires special tools for mounting |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 58 |
| Type | Chain Kit, oil pump drive |
| Function | Chain Kit, oil pump drive |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Chain, oil pump drive (31115)
- 1x Febi Chain Tensioner, oil pump drive (184003)
- 1x Febi Rail, oil pump drive chain (184004)
- 1x Febi Rail, oil pump drive chain (183482)
£62.16
Important compatibility info
| Weight | 4.089 kg |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Placement on Vehicle | Front Axle Left, Lower, Rear |
| Additional Information | with nuts, with fastening/mounting material |
| Paired article numbers | 40366 |
| Material | Cast Steel |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (30255)
- 1x Febi Nut (06877)
- 1x Febi Camber Correction Screw (21560)
- 1x Febi Nut (21557)
£62.16
Important compatibility info
| Function | Breather Valve |
| Weight | 0.400 kg |
| External Thread Size | M6 x 1, M26 x 1,5 |
| Internal Thread Size | M12 x 1,5 |
| Type | Breather Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| Weight | 1.180 kg |
| Material | Cast Aluminium |
| Number of Wings | 6 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| Width | 38.5 mm |
| Outer diameter | 150 mm |
| Inner diameter | 85 mm |
| Weight | 2.616 kg |
| Bearing Type | Tapered Roller Bearing |
| Type | Wheel Bearing |
| Function | Wheel Bearing |
| Placement on Vehicle | Rear Axle, inner |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| Placement on Vehicle | Rear |
| Operating Mode | Mechanical |
| Paired article numbers | 24420 |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Pipe Diameter | 84 mm. 38 mm |
| Mounting points diameter | 12 mm |
| Function | Shock Absorber, driver cab suspension |
| Weight | 2.678 kg |
| Piston conrod diameter | 13 mm |
| Min. Length | 268 mm |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| Weight | 2.670 kg |
| Height | 476 mm |
| Outer diameter | 267 mm |
| Inner diameter | 170 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| Weight | 0.777 kg |
| Function | Charge Air Hose |
| Placement on Vehicle | Left |
| Type | Charge Air Hose |
| Turbocharger line | Charge air cooler to intake manifold |
| Additional Information 2 | with quick couplers |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.15
Important compatibility info
| Spanner Size | 17 |
| Number of Connectors / Ports | 2 |
| Cable Length | 936 mm |
| Weight | 0.07 kg |
| Function | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
| Type | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.15
Important compatibility info
| Outer diameter | 32 mm |
| Spanner Size | 27 |
| Function | Tensioner, timing chain |
| Weight | 0.163 kg |
| Internal Thread Size | M20 x 1,5 |
| Type | Tensioner, timing chain |
| External Thread Size | M24 x 1,5 |
| Additional Information 2 | with cap |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.15
Important compatibility info
| Weight | 0.546 kg |
| Material | Aluminium |
| Function | Brake Master Cylinder |
| Type | Brake Master Cylinder |
| Piston Diameter | 25.4 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.15
Important compatibility info
| Function | Oil sump |
| Extra Description | febi Plus |
| Type | Oil sump |
| Weight | 1.8 kg |
| Additional Information | with oil drain plug |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.14
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| External Teeth, Diff.Side | 26 |
| Additional Information 2 | with nut |
| Thread Size | M20x1,5 |
| Min. Length | 641 mm |
| Weight | 5.230 kg |
| External Teeth, Wheel Side | 23 |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Transmission-side joint diameter | 74.2 mm |
| Wheel Sided Joint Diameter | 79.0 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.13
Important compatibility info
| for OE number | 1628.HQ |
| Spanner Size | 22 |
| Weight | 0.135 kg |
| Cable Length | 1500 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.13
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023