Important compatibility info
Type | Control Unit, glow time |
Weight | 0.047 kg |
Function | Control Unit, glow time |
Extra Description | febi Plus |
Number of Connectors / Ports | 8 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M16 x 1,5 |
Weight | 1.93 kg |
Placement on Vehicle | Front Axle Right, Lower, Front |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 107472 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with bearing, with ball joint |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Internal Thread Size | M12 x 1,25 |
Weight | 4.68 kg |
Placement on Vehicle | Front Axle Left, Lower |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 42432 |
Cone Size | 18 mm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Hole Spacing | 340 mm |
Type | Link/Coupling Rod, stabiliser bar |
Placement on Vehicle | Rear Axle, Rear Axle Left, Rear Axle Right |
Function | Link/Coupling Rod, stabiliser bar |
Length | 340 mm |
Diameter | 125 mm |
Thickness | 35 mm |
Rod/Strut | Coupling Rod |
Bore Diameter | 75 mm |
Weight | 4.300 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Sensor, exhaust gas temperature |
Weight | 0.07 kg |
Type | Sensor, exhaust gas temperature |
for OE number | 03L 906 088 CH |
Placement on Vehicle | after soot particulate filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with screw |
Width | 29 mm |
Outer diameter | 153 mm |
Inner diameter | 30 mm |
Number of Ribs | 5 |
Parameter | 6PK |
Function | Belt Pulley, crankshaft |
Extra Description | ProKit |
Type | Belt Pulley, crankshaft |
Weight | 2.44 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (27722)
- 1x Febi Pulley Bolt (33675)
Important compatibility info
Weight | 6.455 kg |
Length | 858 mm |
Rod/Strut | Push Rod |
Cone Size | 28 mm |
Pipe Diameter | 42 mm |
Function | Centre Rod Assembly |
Extra Description | ProKit |
Internal Thread Size | M30 x 1,5 RHT |
Type | Centre Rod Assembly |
External Thread Size | M20 x 1,5 |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rim Hole Number | 10 -Hole |
Placement on Vehicle | Front Axle |
Brake Disc Type | Internally Vented |
Minimum thickness | 28 mm |
Thickness | 112.8 mm |
Outer diameter | 330 mm |
Bolt Hole Circle Diameter | 120 mm |
Centering Diameter | 95 mm |
Number of mounting bores | 3 |
Surface | Coated |
Function | Brake Disc |
Weight | 15.65 kg |
Brake Disc Thickness | 34 mm |
Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Connectors / Ports | 2 |
Weight | 0.189 kg |
Type | Pressure converter, turbocharger |
Function | Pressure converter, turbocharger |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | both sides |
Length | 515 mm |
Housing length | 314.5 mm |
Function | Gas Spring, boot/cargo area |
Type | Gas Spring, boot/cargo area |
Piston conrod diameter | 8 mm |
Mounting points diameter | 18 mm |
Stroke | 157 mm |
Eject Force | 710 N |
Housing Diameter | 22 mm |
Weight | 0.3 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.180 kg |
Material | Cast Aluminium |
Number of Wings | 6 |
Function | Water Pump, engine cooling |
Water pump impeller material | Plastic |
Seal Material | Rubber |
Additional Information | with gasket/seal |
Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 127 mm |
Thickness | 25 mm |
Inner diameter | 30 mm |
Number of Ribs | 5 |
Parameter | 6PK |
Function | Belt Pulley, crankshaft |
Weight | 1.55 kg |
Type | Belt Pulley, crankshaft |
for OE number | 0515.H6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Guide Rails Kit, timing chain |
Type | Guide Rails Kit, timing chain |
Weight | 0.43 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Window Regulator |
Type | Window Regulator |
Weight | 0.670 kg |
Paired article numbers | 176412 |
Operating Mode | Electric |
Additional Information | without electric motor |
Placement on Vehicle | Left Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Metal |
Outer diameter | 70 mm |
Inner diameter | 14 mm |
Width | 52 mm |
Type | Deflection/Guide Pulley, v-ribbed belt |
Mounting points diameter | 10 mm |
Weight | 0.497 kg |
Function | Deflection/Guide Pulley, v-ribbed belt |
Width of castor bearing surface | 29 mm |
Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Window Regulator |
Paired article numbers | 176632 |
Operating Mode | Electric |
Additional Information | without electric motor |
Type | Window Regulator |
Weight | 0.54 kg |
Placement on Vehicle | Left Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Breather Valve |
Weight | 0.400 kg |
External Thread Size | M6 x 1, M26 x 1,5 |
Internal Thread Size | M12 x 1,5 |
Type | Breather Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M12 x 1,5 |
Weight | 2.83 kg |
Placement on Vehicle | Front Axle |
Cone Size | 17.5 mm |
Pipe Diameter | 22 mm |
Type | Tie Rod |
Function | Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Mounting points diameter | 14 mm. 25 mm |
Function | Shock Absorber, driver cab suspension |
Max. Length | 346 mm |
Min. Length | 252 mm |
Weight | 3.6 kg |
Placement on Vehicle | Front |
Pipe Diameter | 63 mm. 38 mm |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Operating Mode | Mechanical |
Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Outer diameter | 330 mm |
Thickness | 69 mm |
Brake Disc Thickness | 28 mm |
Minimum thickness | 26 mm |
Bolt Hole Circle Diameter | 130 mm |
Centering Diameter | 98 mm |
Paired article numbers | 108215 |
Surface | Coated |
Number of mounting bores | 2 |
Machining | High-carbon |
Type | Brake Disc Rotor |
Function | Brake Disc |
Rotor Style | perforated/vented |
Weight | 9.12 kg |
Rim Hole Number | 5 -Hole |
Additional Information
Technical Information
Attention, this is a sided brake disc.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023