Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Diameter | 18 mm |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA6358 |
Important compatibility info
Additional Information | with gaskets/seals |
Function | Water Pump, engine cooling |
Type | Water Pump, engine cooling |
Important compatibility info
Wear Warning Contact | with acoustic wear warning |
Brake System | Akebono |
Width 1 | 142 mm |
Number of wear indicators | 2 Per Axle |
Thickness/Strength 1 | 15.8 mm |
Number of pads | 4 |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Height 1 | 55.7 mm |
Placement on Vehicle | Front Axle |
Important compatibility info
Type | Tie Rod End |
Placement on Vehicle | Front Axle Left |
Length | 160 mm |
Thread Size | 14X1.5 |
Paired article numbers | FTR6262 |
Function | Tie Rod End |
Important compatibility info
Additional Information 2 | without bearing |
Function | Suspension Strut Support Mount |
Type | Suspension Strut Support Mount |
Paired article numbers | FSM5384 |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
Additional Information 2 | without bearing |
Function | Suspension Strut Support Mount |
Type | Suspension Strut Support Mount |
Paired article numbers | FSM5383 |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
External Teeth, Diff.Side | 22 |
Seal Diameter | 35 mm |
Int. teeth, diff.side, conn.to transm. | 22 |
Function | Joint Kit, drive shaft |
Length | 130 mm |
Type | Joint Kit, drive shaft |
Important compatibility info
Wear Warning Contact | excl. wear warning contact |
Placement on Vehicle | Front Axle |
Replaces | BBP1641 |
Brake System | Akebono |
Thickness/Strength 1 | 17.5 mm |
Number of pads | 4 |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Height 1 | 51.5 mm |
Width 1 | 142.8 mm |
Important compatibility info
Function | Brake Hose |
Length | 220 mm |
Type | Brake Hose |
Thread Type | with external thread |
Additional Information | with banjo fitting |
Additional Information 2 | with banjo bolt |
Thread Size | M10x1 |
Mounting Bolt Thread Size | M12x1 |
Important compatibility info
Function | Brake Hose |
Length | 220 mm |
Additional Information 2 | with banjo bolt |
Type | Brake Hose |
Additional Information | with banjo fitting |
Thread Type | with external thread |
Thread Size | M10x1 |
Mounting Bolt Thread Size | M12x1 |
Important compatibility info
Wear Warning Contact | with acoustic wear warning |
Number of pads | 4 |
Number of wear indicators | 2 Per Axle |
Brake System | Mando |
Thickness/Strength 1 | 16.4 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Height 1 | 46 mm |
Width 1 | 137.6 mm |
Placement on Vehicle | Rear Axle |
Important compatibility info
External Teeth, Wheel Side | 36 |
Function | Joint Kit, drive shaft |
Seal Diameter | 56.3 mm |
Internal Teeth, wheel side | 26 |
Technical Information Number | Middle groove |
Length | 109 mm |
Type | Joint Kit, drive shaft |
Additional Information 2 | with groove |
Important compatibility info
Inner Brake Drum Diameter | 203 mm |
Width | 37 mm |
Function | Brake Shoe Set |
Type | Brake Shoe Set |
Placement on Vehicle | Rear Axle |
Important compatibility info
Length 1 | 894 mm |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Placement on Vehicle | Left Rear |
Important compatibility info
Height | 62 mm |
Inner diameter | 10 mm |
Distance of fastening bolts | 70 mm |
Additional Information 2 | without bearing |
Function | Suspension Strut Support Mount |
Type | Suspension Strut Support Mount |
Paired article numbers | FSM5302 |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
Inner diameter 2 | 48 mm |
Colour | Black |
Function | Charge Air Hose |
Material | Polychloroprene (Neoprene) |
Inner diameter 1 | 48 mm |
Type | Charge Air Hose |
Important compatibility info
Length | 117 mm |
Width | 83 mm |
Inner diameter | 16 mm |
Placement on Vehicle | Front |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Height | 75 mm |
Type | Mounting, engine |
Important compatibility info
Inlet Diameter | 12.2 mm |
Clutch Equipment | with purge pipe |
Function | Central Slave Cylinder, clutch |
Base body material | Plastic |
Type | Central Slave Cylinder, clutch |
Important compatibility info
Wear Warning Contact | with acoustic wear warning |
Thickness/Strength 1 | 16.4 mm |
Brake System | Akebono |
Number of wear indicators | 2 Per Axle |
Number of pads | 4 |
Number of threaded bolts | 4 |
Function | Brake Pad Set, disc brake |
Placement on Vehicle | Front Axle |
Type | Brake Pad Set, disc brake |
Height 1 | 56.3 mm |
Width 1 | 136.4 mm |
Manufacturer | HONDA |
Model | CR-Z INSIGHT JAZZ |
Important compatibility info
Inner diameter 2 | 62 mm |
Inner diameter 1 | 64 mm |
Material | PE (Polyethylene) |
Colour | Black |
Placement on Vehicle | Rear, Left, Lower |
Function | Charge Air Hose |
Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1004S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1109S)






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023