Important compatibility info
Type | Accessory Kit, brake shoes |
Function | Accessory Kit, brake shoes |
Placement on Vehicle | Rear Axle |
Weight | 0.168 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Housing Type | with housing |
Weight | 0.221 kg |
Number of Connectors / Ports | 4 |
Resistor Type | Hot-wire Sensor |
Function | Mass Air Flow Sensor |
Type | Mass Air Flow Sensor |
Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with gasket/seal |
Material | Cast Aluminium |
Weight | 0.740 kg |
Number of Wings | 8 |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Water pump impeller material | Plastic |
Seal Material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Material | Rubber/Metal |
Additional Information 2 | without ball bearing |
Weight | 0.725 kg |
Type | Suspension Strut Support Mount |
Function | Suspension Strut Support Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thickness | 120 mm |
Additional Information | with nuts |
Cone Size 1 | 21 mm |
Steering arm type | for control arm |
Type | Ball Joint |
External Thread Size | M20 x 1,5 |
Weight | 1.0 kg |
Function | Ball Joint |
Cone Size 2 | 26 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.384 kg |
Placement on Vehicle | Front Axle |
Length | 139.4 mm |
Width | 92.3 mm |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 15.7 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Wear Warning Contact | prepared for wear warning indicator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | Requires special tools for mounting |
Chain Type | Simplex, with chain lock |
Number of Chain Links | 126 |
Timing Chain Size | G53HP, G53HR |
Function | Timing Chain |
Weight | 0.346 kg |
Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.211 kg |
Function | Repair Kit, v-ribbed belt tensioner |
Type | Repair Kit, v-ribbed belt tensioner |
Vibration | with vibration damper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Tensioner, v-ribbed belt (28149)
- 1x Febi Vibration Damper, v-ribbed belt (27454)
- 2x Febi Bolt, tensioner pulley (30459)
- 1x Febi Bolt, tensioner pulley (30461)
- 1x Febi Bolt, tensioner pulley (30462)
- 1x Febi Washer (30463)
Important compatibility info
Material | Cast Steel |
Steering arm type | Control Arm |
Paired article numbers | 10123 |
Weight | 2.240 kg |
Placement on Vehicle | Lower Front Axle, Right |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.11 kg |
Spanner Size | 22 |
Cable Length | 400 mm |
Number of circuits | 4 |
Function | Oxygen Sensor |
Type | Oxygen Sensor |
External Thread Size | M18 x 1,5 |
Lambda Sensor | Heated |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Timing Chain Kit |
Timing Chain Size | G53RT, G53RING-1 |
Number of Chain Links | 124 |
Chain Type | Simplex, Closed chain |
Weight | 1.002 kg |
Type | Timing Chain Kit |
Extra Description | Standard Medium Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (31004)
- 1x Febi Tensioner, timing chain (101149)
- 1x Febi Guide, timing chain (107854)
- 1x Febi Guide, timing chain (107855)
- 1x Febi Gear/Sprocket, camshaft (101157)
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Function | Bushing, axle beam |
Thickness | 70 mm |
Material | Rubber/Metal |
Weight | 0.220 kg |
Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Tie Rod End |
Weight | 0.912 kg |
Placement on Vehicle | Front Axle Left |
Length | 189 mm |
Spanner Size | 21 |
External Thread Size | M14 x 1,5 |
Internal Thread Size | M14 x 1,5 |
Function | Tie Rod End |
Paired article numbers | 180559 |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Brake Caliper |
Placement on Vehicle | Rear Axle Right |
Material | Cast Iron |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 178247 |
Weight | 1.99 kg |
Function | Brake Caliper |
Brake caliper piston diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.64 kg |
Placement on Vehicle | Front Axle Left, Lower, Rear |
Material | Aluminium |
Paired article numbers | 38663 |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, control/trailing arm |
Inner diameter | 19 mm |
Thickness | 52 mm |
Width | 52 mm |
Type | Mounting, control/trailing arm |
Additional Information | with holder |
Additional Information
Technical Information
Please tighten the mounting bolts with the wheels on the ground.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (38659)
Important compatibility info
Weight | 0.110 kg |
Number of Connectors / Ports | 2 |
Function | Breather Valve, fuel tank |
Extra Description | febi Plus |
Type | Breather Valve, fuel tank |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.571 kg |
Placement on Vehicle | Left Rear |
Material | Aluminium, Rubber/Metal |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.239 kg |
Placement on Vehicle | Left Front |
Bearing/Mounting Type | Hydro Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 58 mm |
Width | 230 mm |
Material | Paper |
Filter type | Filter Insert |
Function | Air Filter |
Length | 270 mm |
Weight | 0.36 kg |
Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.208 kg |
Inner diameter 2 | 77 mm |
Joint Type | Tripod Joint |
Function | Bellow Kit, drive shaft |
Type | Bellow Kit, drive shaft |
Placement on Vehicle | transmission sided, Front Axle |
Length | 87 mm |
Material | Thermoplastic polyester elastomer |
Inner diameter 1 | 19 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (179729)
- 1x Febi Molybdenum Grease (02582)






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023