Important compatibility info
Weight | 4.650 kg |
Width | 18.5 mm |
Outer diameter | 485.5 mm |
Inner diameter | 432 mm |
Number of Teeth | 160 |
Type | Ring Gear, flywheel |
Function | Ring Gear, flywheel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Bolt Hole Circle Diameter | 78 mm |
External Teeth, Wheel Side | 36 |
Weight | 4.880 kg |
Wheel Sided Joint Diameter | 81 mm |
Min. Length | 556 mm |
Additional Information | with grease |
Placement on Vehicle | Front Axle Left |
Transmission-side joint diameter | 94 mm |
Bore Diameter | 8.5 mm |
Number of mounting bores | 6 |
Function | Drive Shaft |
Type | Drive Shaft |
External Thread Size | M20 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front and Rear, both sides |
Weight | 0.43 kg |
Type | Air Suspension Valve |
Function | Air Suspension Valve |
Replaces | 15496 |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Air Suspension Valve (23563)
- 1x Febi Mounting Set, driver cab suspension valve (29313)
Important compatibility info
Weight | 3.106 kg |
Type | Release Fork, clutch |
Function | Release Fork, clutch |
for OE number | 74 21 362 933 S2 |
Additional Information | with bush, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.841 kg |
Paired article numbers | 34223 |
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Material | Sheet Steel |
Placement on Vehicle | Front Axle Right, Lower |
Extra Description | ProKit |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint, with rubber mount |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (23798)
Important compatibility info
Parameter | 5PK |
Function | Belt Pulley, crankshaft |
Outer diameter | 155 mm |
Inner diameter | 18 mm |
Weight | 1.595 kg |
Additional Information 2 | with screw |
Number of Ribs | 4 |
Width | 22 mm |
Extra Description | ProKit |
Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (26367)
- 1x Febi Centering Bolt, crankshaft pulley (33529)
Important compatibility info
Additional Information 2 | Requires special tools for mounting |
Weight | 0.303 kg |
Chain Type | Simplex, Closed chain |
Number of Chain Links | 58 |
Timing Chain Size | G53RING |
Type | Chain Kit, oil pump drive |
Function | Chain Kit, oil pump drive |
Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Chain, oil pump drive (31115)
- 1x Febi Chain Tensioner, oil pump drive (183599)
- 1x Febi Rail, oil pump drive chain (183865)
- 1x Febi Rail, oil pump drive chain (183597)
Important compatibility info
Additional Information | with adjuster |
Weight | 0.40 kg |
Type | Tailgate Lock |
Function | Tailgate Lock |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.97 kg |
Function | Control/Trailing Arm, wheel suspension |
Paired article numbers | 33366 |
Steering arm type | Control Arm |
Material | Aluminium |
Placement on Vehicle | Front Axle Right, Lower, Rear |
Additional Information | with fastening/mounting material |
Extra Description | ProKit |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with rubber mount, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (21198)
- 1x Febi Mounting and Bolting Kit, control/trailing arm (33201)
Important compatibility info
Weight | 1.160 kg |
Number of Wings | 7 |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Seal Material | Rubber |
Material | Cast Aluminium |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with lock nut |
Weight | 3.295 kg |
Placement on Vehicle | Front Axle Left, Lower |
Material | Cast Steel |
Steering arm type | Control Arm |
Paired article numbers | 39645 |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Extra Description | ProKit |
Additional Information 2 | with screw, with ball joint, with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (39627)
- 1x Febi Nut, ball joint (21884)
- 1x Febi Screw (39229)
Important compatibility info
Length | 59 mm |
Spanner Size | 27 |
Number of Connectors / Ports | 3 |
Function | Sensor, oil pressure |
Screw length below head | 12 mm |
Weight | 0.112 kg |
External Thread Size | M18 x 1,5 |
Colour | Black |
Type | Sensor, oil pressure |
for OE number | 51.27421.0262 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 245 mm |
Outer diameter | 165 mm |
Number of Coils | 5 |
Function | Suspension Spring |
Placement on Vehicle | Rear Axle |
Weight | 4.67 kg |
Wire Diameter | 20 mm |
Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 5.2 kg |
Placement on Vehicle | Front Axle |
Shock Absorber Type | Oil Pressure |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Max. Length | 760 mm |
Min. Length | 474 mm |
Pipe Diameter | 76 mm. 63 mm |
Mounting points diameter | 20 mm |
Piston conrod diameter | 20 mm |
Function | Shock Absorber |
Shock Absorber Design | Telescopic Shock Absorber |
Type | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Plastic |
Operating Mode | Automatic |
Outer diameter | 75 mm |
Weight | 1.201 kg |
Type | Belt Tensioner, v-ribbed belt |
Width of castor bearing surface | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Sheet Steel |
Placement on Vehicle | Front Axle Left, Lower |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Paired article numbers | 34224 |
Weight | 3.841 kg |
Extra Description | ProKit |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with rubber mount, with ball joint |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (23797)
Important compatibility info
Weight | 3.295 kg |
Placement on Vehicle | Front Axle Right, Lower |
Material | Cast Steel |
Steering arm type | Control Arm |
Paired article numbers | 39644 |
Function | Control/Trailing Arm, wheel suspension |
Extra Description | ProKit |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint, with screw, with bearing |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (39628)
- 1x Febi Nut, ball joint (21884)
- 1x Febi Screw (39229)
Important compatibility info
Number of Connectors / Ports | 2 |
Type | Sensor, exhaust gas temperature |
Weight | 0.08 kg |
Function | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.984 kg |
Placement on Vehicle | Front |
Bolt Hole Circle Diameter | 90 mm |
Function | Joint, propshaft |
Additional Information | with nuts |
Outer diameter | 140 mm |
Thickness | 24 mm |
Additional Information 2 | with bolts/screws, with washers |
Inner diameter | 41 mm |
Extra Description | ProKit |
Type | Joint, propshaft |
Number of Holes | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 3x Febi Screw (03931)
- 3x Febi Bolt, drive shaft flange (03934)
- 1x Febi Assembly Kit, propshaft joint (22117)
Important compatibility info
Weight | 0.420 kg |
External Thread Size | M6 x 1, M26 x 1,5 |
Internal Thread Size | M12 x 1,5 |
Function | Breather Valve |
Type | Breather Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.58 kg |
Housing Diameter | 55 mm |
Function | Slave Cylinder, engine brake |
Pressure side external thread size | M10 x 1,5 |
Housing length | 181.5 mm |
Pressure side internal thread size | M12 x 1,5 |
Type | Slave Cylinder, engine brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 4.51 kg |
Additional Information | with rubber mounts |
Placement on Vehicle | Front Axle Left |
Material | Steel |
Additional Information 2 | with ball joint |
Steering arm type | Control Arm |
Paired article numbers | 173552 |
Cone Size | 17 mm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
DIN / ISO | 12098, 1185, 3731 |
Number of Connectors / Ports | 15. 7 |
Version | OE Standard |
Function | Adaptor, electric filament |
Port / Connector type | 15 to 2x7 |
Assignment plan scheme number | 4 |
Type | Adaptor, electric filament |
Weight | 0.552 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with lock nut |
Weight | 4.43 kg |
Placement on Vehicle | Front, Front Axle Left |
Material | Cast Steel |
Inner diameter | 12 mm |
Steering arm type | Control Arm |
Paired article numbers | 36838 |
External Thread Size | M14 x 1,5 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with bearing, with ball joint |
Cone Size 2 | 24 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (36827)
- 1x Febi Nut (36331)
Important compatibility info
Filter type | Screen Filter |
Function | Hydraulic Filter Kit, automatic transmission |
Weight | 0.630 kg |
Length | 253 mm |
Height | 80 mm |
Width | 207 mm |
Type | Hydraulic Filter Kit, automatic transmission |
Additional Information | with gasket/seal |
Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 380 mm |
Thickness | 85 mm |
Rod/Strut | Coupling Rod |
Type | Link/Coupling Rod, stabiliser bar |
Function | Link/Coupling Rod, stabiliser bar |
Weight | 2.8 kg |
Additional Information 2 | without rubber mount(s) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.41 kg |
Chain Type | Simplex, Closed chain |
Number of Chain Links | 40 |
Extra Description | Basic Short Kit |
Function | Timing Chain Kit |
Type | Timing Chain Kit |
for OE number | 0849.23 |
Timing Chain Size | G67HR, G67HP |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tensioner, timing chain (37211)
- 1x Febi Guide, timing chain (37224)
- 1x Febi Timing Chain (33691)
Important compatibility info
External Thread Size | M10 x 1,25 |
Placement on Vehicle | Front |
Operating Mode | Mechanical |
Shock Absorber Mounting Type | Top pin, Bottom eye |
Max. Length | 258 mm |
Min. Length | 203 mm |
Pipe Diameter | 49 mm. 60 mm |
Mounting points diameter | 30 mm |
Piston conrod diameter | 14 mm |
Function | Shock Absorber, driver cab suspension |
Weight | 2.0 kg |
Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.092 kg |
Opening Temperature | 82 °C |
Housing Type | with housing |
Type | Thermostat, coolant |
Function | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.427 kg |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Cooling Hose | from heat exchanger to engine |
Hose Length | 950 mm |
Function | Radiator Hose |
Additional Information 2 | with quick couplers |
Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 12909 |
Placement on Vehicle | Front Axle Right, Lower |
Material | Sheet Steel |
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Weight | 3.500 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts, with lock nut, with holder |
Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 19121 |
Weight | 4.100 kg |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Additional Information 2 | without ball joint |
Material | Cast Steel |
Additional Information | with holder, with rubber mounts |
Placement on Vehicle | Front Axle Right, Lower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 28369 |
Placement on Vehicle | Front Axle Left, Upper |
Weight | 1.245 kg |
Function | Control/Trailing Arm, wheel suspension |
Additional Information | with lock nut, with rubber mounts |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with gaskets/seals |
Material | Cast Aluminium |
Weight | 2.460 kg |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Seal Material | Paper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Width | 44 mm |
Outer diameter | 80.9 mm |
Inner diameter | 27.6 mm |
Number of Holes | 4 |
Bolt Hole Circle Diameter | 100 mm |
Function | Wheel Bearing Kit |
Weight | 2.73 kg |
Type | Wheel Bearing Kit |
Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Bearing Type | Rolling Bearing |
Outer diameter 1 | 64.1 mm |
Outer diameter 2 | 137 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.09 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 800 mm |
Outer diameter | 15 mm |
Number of Connectors / Ports | 2 |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Charge Air Cooler, Left |
Height | 145 mm |
Width | 290 mm |
Additional Information 2 | with clamps |
Inner diameter 1 | 49 mm |
Inner diameter 2 | 66 mm |
Weight | 1.368 kg |
Type | Charge Air Hose |
Hose Length | 690 mm |
Function | Charge Air Hose |
Turbocharger line | Piping to charge air cooler |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with rubber mounts |
Placement on Vehicle | Front Axle Right |
Material | Steel |
Steering arm type | Control Arm |
Paired article numbers | 173551 |
Cone Size | 17 mm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Weight | 4.51 kg |
Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Replaces | 19123 |
Paired article numbers | 19120 |
Additional Information | with holder, with rubber mounts |
Weight | 4.100 kg |
Type | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Additional Information 2 | without ball joint |
Material | Cast Steel |
Placement on Vehicle | Front Axle Left, Lower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.967 kg |
Type | Dryer, air conditioning |
Function | Dryer, air conditioning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 14562 |
Colour | Grey |
Thread Type | with left-hand thread |
Cone Size | 30 mm |
Function | Tie Rod End |
Placement on Vehicle | Front Axle Left |
Length | 133 mm |
Material | Steel |
Outer diameter | 40 mm |
Extra Description | ProKit |
Type | Tie Rod End |
Weight | 2.853 kg |
External Thread Size | M24 x 1,5 |
Internal Thread Size | M46 x 1,5 |
Additional Information 2 | with crown nut |
Hole Spacing | 50 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.261 kg |
Number of Connectors / Ports | 3 |
Function | Ignition Coil |
Type | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.52 kg |
Outer diameter | 44 mm |
Length | 180 mm |
Type | Slave Cylinder, engine brake |
Function | Slave Cylinder, engine brake |
External Thread Size | M8 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M12 x 1,25 |
Weight | 4.035 kg |
Placement on Vehicle | Front Axle Right, Lower |
Material | Sheet Steel |
Additional Information 2 | with ball joint |
Steering arm type | Control Arm |
Paired article numbers | 174228 |
Cone Size | 24 mm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts, with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.724 kg |
Internal Thread Size | M12 x 1,5 |
Placement on Vehicle | Rear Axle |
Outer diameter | 145 mm. 45 mm |
Thickness | 67 mm |
Number of Holes | 6 |
Number of Teeth | 30 |
Function | Wheel Hub |
Type | Wheel Hub |
Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Pipe Diameter | 40 mm |
Function | Centre Rod Assembly |
Colour | red/brown |
Length | 822 mm |
Outer diameter | 40 mm |
Rod/Strut | Push Rod |
Placement on Vehicle | Front Axle |
Weight | 6.200 kg |
Cone Size | 26 mm |
Driver Position | for left-hand/right-hand drive vehicles |
Extra Description | ProKit |
Internal Thread Size | M30 x 1,5 |
External Thread Size | M20 x 1,5 |
Type | Centre Rod Assembly |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Passenger Side |
Number of Connectors / Ports | 9 |
Weight | 0.100 kg |
Combi Switch Function | Window Regulator |
Type | Multi-Function Switch |
Function | Multi-Function Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 12 mm |
Placement on Vehicle | Rear |
Outer diameter | 144 mm |
Thickness | 30 mm. 59 mm |
Number of Holes | 6 |
Bolt Hole Circle Diameter | 110 mm |
Function | Joint, propshaft |
Weight | 0.73 kg |
Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.049 kg |
Colour | Orange |
Placement on Vehicle | Right Exterior Mirror |
Length | 58 mm |
Height | 64 mm |
Width | 90 mm |
Paired article numbers | 107877 |
Type | Auxiliary Direction Indicator |
Function | Auxiliary Direction Indicator |
Extra Description | febi Plus |
Light Design | Halogen |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Weight | 2.956 kg |
Steering arm type | Control Arm, Four-Point Link (CV) |
Additional Information 2 | with ball joint |
Material | Sheet Steel |
Placement on Vehicle | Front Axle Right, Lower |
Cone Size | 17 mm |
Paired article numbers | 175414 |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023