Important compatibility info
Weight | 0.036 kg |
Function | Sensor, intake manifold pressure |
Number of Connectors / Ports | 3 |
Type | Sensor, intake manifold pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | after catalytic converter |
Spanner Size | 22 |
Weight | 0.118 kg |
Cable Length | 1105 mm |
Number of circuits | 4 |
Lambda Sensor | Heated, Diagnostic Probe |
Type | Oxygen Sensor |
Function | Oxygen Sensor |
External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right |
Length | 156 mm |
Width | 160 mm |
Thickness | 124.2 mm |
Bearing/Mounting Type | Hydro Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Weight | 1.98 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with fastening material |
Function | Brake Pad Set, disc brake |
Weight | 10.04 kg |
Thickness/Strength 1 | 30 mm |
Type | Brake Pad Set, disc brake |
Inspection Tag | ECE R90 Approved |
Wear Warning Contact | prepared for wear warning indicator |
Width | 107.7 mm |
Length | 247.5 mm |
Placement on Vehicle | Rear Axle, Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Bore Diameter | 14 mm |
Shock Absorber Type | Gas Pressure |
Shock Absorber System | Twin-Tube |
Shock Absorber Design | Telescopic Shock Absorber |
Weight | 2.130 kg |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Mounting bores distance | 432 mm |
Max. Length | 432 mm |
Min. Length | 302 mm |
Pipe Diameter | 60.5 mm. 51 mm |
Piston conrod diameter | 15 mm |
Type | Shock Absorber |
Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.260 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Width | 55 mm |
Outer diameter | 78 mm |
Bearing Type | Angular Ball Bearing |
Inner diameter | 30 mm |
Function | Wheel Bearing Kit |
Sealing lip material | NBR (nitrile butadiene rubber) |
Type | Wheel Bearing Kit |
Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.45 kg |
Function | Mounting, engine |
Type | Mounting, engine |
Placement on Vehicle | Rear |
for OE number | 52049391 |
Bearing/Mounting Type | Rubber-Metal Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rotor Style | Solid |
Weight | 5.27 kg |
Placement on Vehicle | Front Axle |
Outer diameter | 273 mm |
Thickness | 63.3 mm |
Brake Disc Thickness | 12.7 mm |
Minimum thickness | 10.6 mm |
Bolt Hole Circle Diameter | 112 mm |
Centering Diameter | 69.6 mm |
Surface | Coated |
Number of mounting bores | 5 |
Function | Brake Disc |
Rim Hole Number | 5 -Hole |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Cast Steel |
Placement on Vehicle | Rear Axle Right, Upper |
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Paired article numbers | 184453 |
Additional Information | with rubber-metal mounts |
Weight | 3.328 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Bolt Hole Circle Diameter | 78 mm |
External Teeth, Wheel Side | 36 |
Weight | 4.880 kg |
Wheel Sided Joint Diameter | 81 mm |
Min. Length | 556 mm |
Additional Information | with grease |
Placement on Vehicle | Front Axle Left |
Transmission-side joint diameter | 94 mm |
Bore Diameter | 8.5 mm |
Number of mounting bores | 6 |
Function | Drive Shaft |
Type | Drive Shaft |
External Thread Size | M20 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Weight | 2.956 kg |
Steering arm type | Control Arm, Four-Point Link (CV) |
Additional Information 2 | with ball joint |
Material | Sheet Steel |
Placement on Vehicle | Front Axle Right, Lower |
Cone Size | 17 mm |
Paired article numbers | 175414 |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.55 kg |
Number of Connectors / Ports | 4 |
Function | Thermostat, coolant |
Opening Temperature | 83 °C |
Type | Thermostat, coolant |
Additional Information | with gasket/seal |
Additional Information 2 | with Temperature Switch |
Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Combi Switch Function | with hazard warning light function, with fog-lamp function, with rear fog light function, with light dimmer function |
Weight | 0.089 kg |
Function | Switch, headlight |
Type | Switch, headlight |
Control Type | Rotary Operation |
Switch | with dimmer switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.49 kg |
Material | Cast Aluminium |
Number of Wings | 7 |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Water pump impeller material | Plastic |
Seal Material | Paper |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.758 kg |
Housing material | Aluminium |
Additional Information 2 | with handle, with switch |
Height | 220 mm |
Width | 125 mm |
Additional Information | with holder |
Inspection Tag | EMC |
Rated Power | 22 W |
Light Design | LED |
Mounting Type | Fully assembled |
Cable Length | 280 mm |
Depth | 73 mm |
Voltage from | 12 V |
Light Distribution | Long-range illumination |
Voltage to | 36 V |
Protection Type (IP Code) | IP6K9K |
Fulfils ECE norm | R10 |
Lumen | 2160 lm |
Temperature range from | -30 °C |
Temperature range to | 50 °C |
Function | Worklight |
Extra Description | ProKit |
Type | Worklight |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Additional Information 2 | with nut |
Thread Size | M20x1,5 |
External Teeth, Wheel Side | 23 |
Weight | 5.702 kg |
External Teeth, Diff.Side | 23 |
Min. Length | 727 mm |
Wheel Sided Joint Diameter | 84 mm |
Transmission-side joint diameter | 78.6 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.86 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 252 mm |
Additional Information | with counter nut |
Function | Inner Tie Rod |
Extra Description | ProKit |
Type | Inner Tie Rod |
External Thread Size | M18 x 1,5 |
Internal Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.37 kg |
Placement on Vehicle | Left, Lower, Front, Front Axle |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 106560 |
Function | Control/Trailing Arm, wheel suspension |
Additional Information 2 | without ball joint |
Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with ball joint |
Additional Information | with rubber mounts |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Weight | 2.956 kg |
Cone Size | 17 mm |
Paired article numbers | 175415 |
Steering arm type | Control Arm |
Material | Sheet Steel |
Placement on Vehicle | Front Axle Left, Lower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Replaces | 19123 |
Paired article numbers | 19120 |
Additional Information | with holder, with rubber mounts |
Weight | 4.100 kg |
Type | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Additional Information 2 | without ball joint |
Material | Cast Steel |
Placement on Vehicle | Front Axle Left, Lower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023