Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 1.140 kg |
| External Thread Size | M12 x 1,25 |
| Length | 619 mm |
| Placement on Vehicle | Front Axle, Centre |
| Function | Tie Rod |
| Type | Tie Rod |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Weight | 0.092 kg |
| Opening Temperature | 82 °C |
| Housing Type | with housing |
| Type | Thermostat, coolant |
| Function | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Weight | 0.984 kg |
| Placement on Vehicle | Front |
| Bolt Hole Circle Diameter | 90 mm |
| Function | Joint, propshaft |
| Additional Information | with nuts |
| Outer diameter | 140 mm |
| Thickness | 24 mm |
| Additional Information 2 | with bolts/screws, with washers |
| Inner diameter | 41 mm |
| Extra Description | ProKit |
| Type | Joint, propshaft |
| Number of Holes | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 3x Febi Screw (03931)
- 3x Febi Bolt, drive shaft flange (03934)
- 1x Febi Assembly Kit, propshaft joint (22117)
£58.20
Important compatibility info
| Voltage | 12 V |
| Driver Position | for right-hand drive vehicles |
| Weight | 1.7 kg |
| Type | Interior Blower |
| Function | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Length | 59 mm |
| Spanner Size | 27 |
| Number of Connectors / Ports | 3 |
| Function | Sensor, oil pressure |
| Screw length below head | 12 mm |
| Weight | 0.112 kg |
| External Thread Size | M18 x 1,5 |
| Colour | Black |
| Type | Sensor, oil pressure |
| for OE number | 51.27421.0262 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Shock Absorber Mounting Type | Top eye, Bottom Pin |
| Pipe Diameter | 41 mm |
| Function | Shock Absorber, driver cab suspension |
| Type | Shock Absorber, driver cab suspension |
| Piston conrod diameter | 12 mm |
| Mounting points diameter | 14 mm |
| Min. Length | 221 mm |
| Max. Length | 336 mm |
| Weight | 1.7 kg |
| Operating Mode | Mechanical |
| Placement on Vehicle | Front |
| External Thread Size | M12 x 1,75 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Weight | 5.2 kg |
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 760 mm |
| Min. Length | 474 mm |
| Pipe Diameter | 76 mm. 63 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 20 mm |
| Function | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
| Type | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Function | Repair Kit, kingpin |
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Length | 126 mm |
| Outer diameter | 54 mm. 50 mm |
| Weight | 2.028 kg |
| Extra Description | ProKit |
| Type | Repair Kit, kingpin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Seal Ring, steering knuckle (03028)
- 1x Febi Lock Ring, steering knuckle (05880)
- 1x Febi Circlip (06065)
- 1x Febi Seal Ring, steering knuckle (26286)
- 2x Febi Bush, steering knuckle (15858)
- 1x Febi Kingpin (26289)
£58.20
Important compatibility info
| Pipe Diameter | 40 mm |
| Function | Centre Rod Assembly |
| Colour | red/brown |
| Length | 822 mm |
| Outer diameter | 40 mm |
| Rod/Strut | Push Rod |
| Placement on Vehicle | Front Axle |
| Weight | 6.200 kg |
| Cone Size | 26 mm |
| Driver Position | for left-hand/right-hand drive vehicles |
| Extra Description | ProKit |
| Internal Thread Size | M30 x 1,5 |
| External Thread Size | M20 x 1,5 |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Weight | 0.94 kg |
| Additional Information | with axle nut |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 37 mm |
| Outer diameter | 83 mm |
| Inner diameter | 42 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Additional Information 2 | with integrated magnetic sensor ring, with retaining ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Width of castor bearing surface | 38 mm |
| Operating Mode | Automatic |
| Weight | 1.350 kg |
| Outer diameter | 70 mm |
| Width | 100 mm |
| Material | Metal |
| Type | Belt Tensioner, V-ribbed belt |
| Function | Belt Tensioner, V-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Weight | 1.49 kg |
| Material | Cast Aluminium |
| Number of Wings | 7 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Paper |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| External Thread Size | M12 x 1,25 |
| Weight | 4.035 kg |
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 174228 |
| Cone Size | 24 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts, with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| DIN / ISO | 12098, 1185, 3731 |
| Number of Connectors / Ports | 15. 7 |
| Version | OE Standard |
| Function | Adaptor, electric filament |
| Port / Connector type | 15 to 2x7 |
| Assignment plan scheme number | 4 |
| Type | Adaptor, electric filament |
| Weight | 0.552 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Additional Information | with adjuster |
| Weight | 0.40 kg |
| Type | Tailgate Lock |
| Function | Tailgate Lock |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Weight | 0.112 kg |
| Number of Connectors / Ports | 14 |
| Combi Switch Function | with cruise control, with indicator function, with high beam function |
| Type | Steering Column Switch |
| Function | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Function | Window Regulator |
| Type | Window Regulator |
| Weight | 1.5 kg |
| Paired article numbers | 175794 |
| Operating Mode | Electric |
| Additional Information | without electric motor |
| Placement on Vehicle | Left Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Additional Information | with lock nut |
| Weight | 4.43 kg |
| Placement on Vehicle | Front, Front Axle Left |
| Material | Cast Steel |
| Inner diameter | 12 mm |
| Steering arm type | Control Arm |
| Paired article numbers | 36838 |
| External Thread Size | M14 x 1,5 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with bearing, with ball joint |
| Cone Size 2 | 24 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (36827)
- 1x Febi Nut (36331)
£58.20
Important compatibility info
| Paired article numbers | 14562 |
| Colour | Grey |
| Thread Type | with left-hand thread |
| Cone Size | 30 mm |
| Function | Tie Rod End |
| Placement on Vehicle | Front Axle Left |
| Length | 133 mm |
| Material | Steel |
| Outer diameter | 40 mm |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Weight | 2.853 kg |
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M46 x 1,5 |
| Additional Information 2 | with crown nut |
| Hole Spacing | 50 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Housing length | 203 mm |
| Function | Gas Spring, bonnet |
| Type | Gas Spring, bonnet |
| Piston conrod diameter | 8 mm |
| Mounting points diameter | 17.8 mm |
| Stroke | 130 mm |
| Eject Force | 295 N |
| Housing Diameter | 18 mm |
| Weight | 0.2 kg |
| Additional Information | Change interval/date according to gas spring imprint |
| Length | 364 mm |
| Placement on Vehicle | both sides |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023