Important compatibility info
Function | Drive Shaft |
Placement on Vehicle | Front Axle Left |
Additional Information 2 | with nut |
External Teeth, Wheel Side | 36 |
Weight | 5.000 kg |
Min. Length | 546 mm |
Wheel Sided Joint Diameter | 89 mm |
Transmission-side joint diameter | 107.7 mm |
Type | Drive Shaft |
External Thread Size | M20 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M12 x 1,25 |
Weight | 4.035 kg |
Placement on Vehicle | Front Axle Right, Lower |
Material | Sheet Steel |
Additional Information 2 | with ball joint |
Steering arm type | Control Arm |
Paired article numbers | 174228 |
Cone Size | 24 mm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts, with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 19121 |
Weight | 4.100 kg |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Additional Information 2 | without ball joint |
Material | Cast Steel |
Additional Information | with holder, with rubber mounts |
Placement on Vehicle | Front Axle Right, Lower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.967 kg |
Type | Dryer, air conditioning |
Function | Dryer, air conditioning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.97 kg |
Function | Control/Trailing Arm, wheel suspension |
Paired article numbers | 33366 |
Steering arm type | Control Arm |
Material | Aluminium |
Placement on Vehicle | Front Axle Right, Lower, Rear |
Additional Information | with fastening/mounting material |
Extra Description | ProKit |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with rubber mount, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (21198)
- 1x Febi Mounting and Bolting Kit, control/trailing arm (33201)
Important compatibility info
Material | Sheet Steel |
Placement on Vehicle | Front Axle Left, Lower |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Paired article numbers | 34224 |
Weight | 3.841 kg |
Extra Description | ProKit |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with rubber mount, with ball joint |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (23797)
Important compatibility info
Weight | 4.51 kg |
Additional Information | with rubber mounts |
Placement on Vehicle | Front Axle Left |
Material | Steel |
Additional Information 2 | with ball joint |
Steering arm type | Control Arm |
Paired article numbers | 173552 |
Cone Size | 17 mm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.09 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 800 mm |
Outer diameter | 15 mm |
Number of Connectors / Ports | 2 |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 215 mm |
Height | 24 mm |
Width | 105 mm |
Number of mounting bores | 6 |
Mounting points diameter | 9.2 mm |
Function | Thermostat Housing |
Additional Information | with gasket/seal |
Weight | 0.415 kg |
Type | Thermostat Housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Thermostat Housing (104963)
- 1x Febi Gasket, thermostat housing (107781)
Important compatibility info
Weight | 3.106 kg |
Type | Release Fork, clutch |
Function | Release Fork, clutch |
for OE number | 74 21 362 933 S2 |
Additional Information | with bush, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Brake Caliper |
Placement on Vehicle | Rear Axle Left |
Material | Cast Iron |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 179491 |
Weight | 1.462 kg |
Function | Brake Caliper |
Brake caliper piston diameter | 34 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 4.650 kg |
Width | 18.5 mm |
Outer diameter | 485.5 mm |
Inner diameter | 432 mm |
Number of Teeth | 160 |
Type | Ring Gear, flywheel |
Function | Ring Gear, flywheel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Shock Absorber Mounting Type | Top eye, Bottom Pin |
Pipe Diameter | 41 mm |
Function | Shock Absorber, driver cab suspension |
Type | Shock Absorber, driver cab suspension |
Piston conrod diameter | 12 mm |
Mounting points diameter | 14 mm |
Min. Length | 221 mm |
Max. Length | 336 mm |
Weight | 1.7 kg |
Operating Mode | Mechanical |
Placement on Vehicle | Front |
External Thread Size | M12 x 1,75 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front |
Operating Mode | Mechanical |
Weight | 3.5 kg |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Min. Length | 282 mm |
Pipe Diameter | 38 mm |
Mounting points diameter | 25 mm. 14 mm |
Piston conrod diameter | 13 mm |
Type | Shock Absorber, driver cab suspension |
Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.93 kg |
Length | 800 mm |
Width | 250 mm |
Material | Rubber |
Thickness | 30 mm |
Function | Gasket, oil sump |
Type | Gasket, oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Brake Shaft, drum brake |
Outer diameter | 98 mm |
Number of Teeth | 26 |
Length | 296 mm |
Screw length below head | 245 mm |
Weight | 3.633 kg |
Type | Brake Shaft, drum brake |
Placement on Vehicle | Right Front |
Paired article numbers | 179423 |
Brake Shaft Cam | S-cam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Brake Caliper |
Placement on Vehicle | Rear Axle Right |
Material | Cast Iron |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 179489 |
Weight | 1.462 kg |
Function | Brake Caliper |
Brake caliper piston diameter | 34 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.49 kg |
Material | Cast Aluminium |
Number of Wings | 7 |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Water pump impeller material | Plastic |
Seal Material | Paper |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Cone Size | 32 mm |
Pipe Diameter | 36 mm |
Placement on Vehicle | Rear Axle |
Length | 390 mm |
Rod/Strut | Coupling Rod |
Weight | 4.2 kg |
Function | Link/Coupling Rod, stabiliser bar |
External Thread Size | M24 x 1,5 |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Width | 44 mm |
Outer diameter | 80.9 mm |
Inner diameter | 27.6 mm |
Number of Holes | 4 |
Bolt Hole Circle Diameter | 100 mm |
Function | Wheel Bearing Kit |
Weight | 2.73 kg |
Type | Wheel Bearing Kit |
Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Bearing Type | Rolling Bearing |
Outer diameter 1 | 64.1 mm |
Outer diameter 2 | 137 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023