Proud to be a UK-based company
Contact usHose & Pipe
invoice Page 23 of 89
Results 221 - 230 of 889
Part number: 2ASS
Important compatibility info
| Title | Hose Clips S/S 2A 35-50mm - Box of 10 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- 304 grade stainless steel
- Independently tested by the British Standards Institute (BSi) and carry the British Standard Kitemark™ BS 5315:1991
- The smooth inside profile of the band and rolled edges give protection for all types of hoses including soft hoses made from rubber or silicone
- The band is continuously threaded to enable extra flexibility when adjusting the clip to the correct size
- The original worm drive hose clip
ONLY
£30.59
£30.59
Part number: 1XSS
Important compatibility info
| Title | Hose Clips S/S 1 30-40mm - Box of 10 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- 304 grade stainless steel
- Independently tested by the British Standards Institute (BSi) and carry the British Standard Kitemark™ BS 5315:1991
- The smooth inside profile of the band and rolled edges give protection for all types of hoses including soft hoses made from rubber or silicone
- The band is continuously threaded to enable extra flexibility when adjusting the clip to the correct size
- The original worm drive hose clip
ONLY
£30.51
£30.51
Part number: 102603
Please enter your vehicle information above to check this fits your vehicle!
Important compatibility info
| for OE number | 11 61 7 559 530 |
| Inner diameter | 14.5 mm |
| Function | Hose, crankcase ventilation |
| Weight | 0.050 kg |
| Additional Information 2 | with quick couplers |
| Extra Description | febi Plus |
| Type | Hose, crankcase ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£30.49
£30.49
Part number: EMH162
Please enter your vehicle information above to check this fits your vehicle!
Important compatibility info
| Material | Plastic |
| Colour | Black |
| Type | Repair Kit, crankcase ventilation |
| Function | Repair Kit, crankcase ventilation |
Additional Information
- 1x Gates Oil Separator, crankcase ventilation (EMH199)
- 1x Gates Hose, crankcase ventilation (EMH198)
- 1x Gates Hose, crankcase ventilation (EMH473)
ONLY
£30.27
£30.27
Part number: 3225-00074
Important compatibility info
ONLY
£29.99
£29.99
Part number: EMH528
Important compatibility info
| Hose Length | 284 mm |
| Inner diameter 2 | 8 mm |
| Inner diameter 1 | 10.5 mm |
| Material | NBR (nitrile butadiene rubber) |
| Colour | Black |
| Type | Hose, crankcase ventilation |
| Function | Hose, crankcase ventilation |
ONLY
£29.89
£29.89
Part number: PPH08
Important compatibility info
| Title | Fuel Hose Rubber 5/16in. (8mm) x 5m |
Additional Information
Over time hoses and pipes deteriorate. To avoid drips and leaks you may need to replace these from time to time to ensure that you vehicle is running effectively and efficiently. Pearl Automotive provide a wide range of replacement parts and accessories to cater for a wide range of circumstances.
This roll of fuel hose from Pearl Automotive is 5/16 inch hose (8mm). It comes in a 5m length made from MBR.CR suitable for leaded and unleaded fuels.
Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.
Over time small parts deteriorate. To avoid a drop in your vehicles efficiency and performance you may need to replace these from time to time to ensure that you vehicle is running effectively and efficiently. Pearl Automotive provide a wide range of replacement parts and accessories to cater for a wide range of circumstances. This roll of fuel hose from Pearl Automotive is 5/16 inch hose (8mm). It comes in a 5m length made from MBR.CR suitable for leaded and unleaded fuels. Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.
- Suitable for use with leaded, unleaded and fuel injected engines.
- Made from NBR/PCV/CR superior quality rubber.
- Fuel hose 5/16in. (8mm) inside diameter x length 5m
ONLY
£29.85
£29.85
Part number: EMH369
Important compatibility info
| Hose Length | 600 mm |
| Material | Plastic |
| Colour | Black |
| Function | Hose, crankcase ventilation |
| Inner diameter 2 | 10 mm |
| Inner diameter 1 | 10 mm |
| Type | Hose, crankcase ventilation |
ONLY
£29.84
£29.84
Part number: 1SS
Important compatibility info
| Title | Hose Clips S/S 1M 25-35mm - Box of 10 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- 304 grade stainless steel
- Independently tested by the British Standards Institute (BSi) and carry the British Standard Kitemark™ BS 5315:1991
- The smooth inside profile of the band and rolled edges give protection for all types of hoses including soft hoses made from rubber or silicone
- The band is continuously threaded to enable extra flexibility when adjusting the clip to the correct size
- The original worm drive hose clip
ONLY
£29.80
£29.80
Part number: 106516
Important compatibility info
| Weight | 0.113 kg |
| Placement on Vehicle | Left |
| Material | Plastic |
| Paired article numbers | 106517 |
| Type | Hose, crankcase ventilation |
| Function | Hose, crankcase ventilation |
| Extra Description | febi Plus |
| Additional Information 2 | with quick couplers |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£29.77
£29.77
Page 23 of 89
Hose & Pipe
