Proud to be a UK-based company
Contact usHose & Pipe
invoice Page 11 of 29
Results 301 - 330 of 861
Part number: EMH462
Important compatibility info
| Inner diameter 1 | 21 mm |
| Inner diameter 2 | 20 mm |
| Hose Length | 133 mm |
| Material | NBR (nitrile butadiene rubber) |
| Colour | Black |
| Function | Hose, crankcase ventilation |
| Type | Hose, crankcase ventilation |
ONLY
£25.32
£25.32
Part number: MFL1262
Important compatibility info
| Inner diameter 2 | 6 mm |
| Hose Length | 385 mm |
| Inner diameter 1 | 9 mm |
| Material | Plastic |
| Colour | White-transparent |
| Type | Fuel Hose |
| Function | Fuel Hose |
ONLY
£25.11
£25.11
Part number: NB1315
Important compatibility info
| Title | Junior Clips M/S 13-15mm - Pack of 50 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- Recommended tightening torque - 1.5Nm, maximum tightening torque 2Nm
- 7mm A/F screw fastening
- Used in applications such as securing fuel lines and heater hoses
- Ideal for small bore hoses with relatively low pressures, where little clamping force is required
- Mini clips, also known as nut & bolt clips
ONLY
£25.11
£25.11
Part number: 0XSS
Important compatibility info
| Title | Hose Clips S/S 0X 18-25mm - Box of 10 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- 304 grade stainless steel
- Independently tested by the British Standards Institute (BSi) and carry the British Standard Kitemark™ BS 5315:1991
- The smooth inside profile of the band and rolled edges give protection for all types of hoses including soft hoses made from rubber or silicone
- The band is continuously threaded to enable extra flexibility when adjusting the clip to the correct size
- The original worm drive hose clip
ONLY
£25.07
£25.07
Part number: MFL1228
Important compatibility info
| Inner diameter 1 | 9 mm |
| Type | Fuel Hose |
| Function | Fuel Hose |
| Hose Length | 900 mm |
| Material | Plastic |
| Colour | White-transparent |
| Inner diameter 2 | 6 mm |
| Placement on Vehicle | Between high pressure pump and fuel press. regulating valve |
ONLY
£25.06
£25.06
Part number: MFL1230
Important compatibility info
| Material | Plastic |
| Colour | White-transparent |
| Type | Fuel Hose |
| Function | Fuel Hose |
| Inner diameter 2 | 6 mm |
| Hose Length | 940 mm |
| Inner diameter 1 | 9 mm |
| Placement on Vehicle | Between supply pump and fuel rail |
ONLY
£24.96
£24.96
Part number: NB1113
Important compatibility info
| Title | Junior Clips M/S 11-13mm - Pack of 50 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- Recommended tightening torque - 1.5Nm, maximum tightening torque 2Nm
- 7mm A/F screw fastening
- Used in applications such as securing fuel lines and heater hoses
- Ideal for small bore hoses with relatively low pressures, where little clamping force is required
- Mini clips, also known as nut & bolt clips
ONLY
£24.85
£24.85
Part number: NB1214
Important compatibility info
| Title | Junior Clips M/S 12-14mm - Pack of 50 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- Recommended tightening torque - 1.5Nm, maximum tightening torque 2Nm
- 7mm A/F screw fastening
- Used in applications such as securing fuel lines and heater hoses
- Ideal for small bore hoses with relatively low pressures, where little clamping force is required
- Mini clips, also known as nut & bolt clips
ONLY
£24.85
£24.85
Part number: 186142
Important compatibility info
| Material | Rubber |
| Length | 452 mm |
| Weight | 0.145 kg |
| Type | Hydraulic Hose, steering |
| Function | Hydraulic Hose, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£24.84
£24.84
Part number: EMH714
Important compatibility info
| Inner diameter 1 | 14.5 mm |
| Colour | Black |
| Material | Plastic |
| Inner diameter 2 | 14.5 mm |
| Type | Hose, crankcase ventilation |
| Hose Length | 330 mm |
| Function | Hose, crankcase ventilation |
ONLY
£24.83
£24.83
Part number: 102606
Important compatibility info
| Weight | 0.060 kg |
| Function | Hose, air supply |
| Extra Description | febi Plus |
| Additional Information 2 | with quick couplers |
| Type | Hose, air supply |
| Inner diameter | 18 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£24.82
£24.82
Part number: 32884
Important compatibility info
| Title | Pipe Connector - T Piece Push-Fit - 12mm - Pack Of 10 |
Additional Information
- Qty: 10
- Natural
- Metric Sizes
- Plastic
- Equal Tee
- 12.0mm ID x L69 x H36
ONLY
£24.72
£24.72
Part number: EMH636
Important compatibility info
| Hose Length | 330 mm |
| Inner diameter 2 | 18.5 mm |
| Placement on Vehicle | from cylinder head cover to oil separator |
| Material | Plastic |
| Colour | Black |
| Function | Hose, crankcase ventilation |
| Type | Hose, crankcase ventilation |
| Inner diameter 1 | 18.5 mm |
ONLY
£24.71
£24.71
Part number: 4272-10300
Important compatibility info
ONLY
£24.66
£24.66
Part number: EMH656
Important compatibility info
| Function | Hose, crankcase ventilation |
| Hose Length | 280 mm |
| Type | Hose, crankcase ventilation |
| Colour | Black |
| Inner diameter 2 | 16 mm |
| Material | Plastic |
| Inner diameter 1 | 16 mm |
ONLY
£24.58
£24.58
Part number: 179744
Important compatibility info
| Weight | 0.072 kg |
| Type | Hose, crankcase ventilation |
| Function | Hose, crankcase ventilation |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£24.57
£24.57
Part number: EMH148
Important compatibility info
| Function | Hose, crankcase ventilation |
| Colour | Black |
| Material | Plastic |
| Inner diameter 2 | 5 mm |
| Inner diameter 1 | 8 mm |
| Type | Hose, crankcase ventilation |
| Hose Length | 420 mm |
ONLY
£24.55
£24.55
Part number: NB0810
Important compatibility info
| Title | Junior Clips M/S 8-10mm - Pack of 50 |
Additional Information
Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time.
In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- Recommended tightening torque - 1.5Nm, maximum tightening torque 2Nm
- 7mm A/F screw fastening
- Used in applications such as securing fuel lines and heater hoses
- Ideal for small bore hoses with relatively low pressures, where little clamping force is required
- Mini clips, also known as nut & bolt clips
ONLY
£24.54
£24.54
Part number: MFL1089
Important compatibility info
| Material | Plastic |
| Colour | White-transparent |
| Function | Fuel Hose |
| Type | Fuel Hose |
| Placement on Vehicle | between fuel filter and high pressure pump |
ONLY
£24.45
£24.45
Part number: MFL1248
Important compatibility info
| Material | NBR (nitrile butadiene rubber) |
| Colour | Black |
| Type | Hose, fuel overflow |
| Function | Hose, fuel overflow |
ONLY
£24.44
£24.44
Part number: MFL1229
Important compatibility info
| Colour | White-transparent |
| Function | Fuel Hose |
| Hose Length | 1000 mm |
| Material | Plastic |
| Type | Fuel Hose |
| Inner diameter 1 | 9 mm |
| Inner diameter 2 | 6 mm |
| Placement on Vehicle | Between high pressure pump and fuel press. regulating valve |
ONLY
£24.42
£24.42
Part number: MFL1195
Important compatibility info
| Material | Plastic |
| Colour | Black |
| Type | Fuel Hose |
| Function | Fuel Hose |
ONLY
£24.39
£24.39
Part number: 7036
Important compatibility info
| Operating temperature to | +100 °C |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Operating temperature from | -40 °C |
| Hose length | 0.6 m |
| Function | Hose |
| Working pressure | 2.3 bar |
| Inner diameter 2 | 50 mm |
| Inner diameter 1 | 50 mm |
| Type | Hose |
ONLY
£24.35
£24.35
Part number: EMH420
Important compatibility info
| Inner diameter 1 | 16 mm |
| Inner diameter 2 | 16 mm |
| Material | Plastic |
| Colour | Black |
| Function | Hose, crankcase ventilation |
| Type | Hose, crankcase ventilation |
| Hose Length | 355 mm |
| Placement on Vehicle | from cylinder head cover to oil separator |
ONLY
£24.35
£24.35
Part number: MFL1131
Important compatibility info
| Function | Fuel Hose |
| Colour | White-transparent |
| Material | Plastic |
| Inner diameter 1 | 9 mm |
| Inner diameter 2 | 6 mm |
| Placement on Vehicle | Between high pressure pump and fuel press. regulating valve |
| Hose Length | 855 mm |
| Type | Fuel Hose |
ONLY
£24.32
£24.32
Part number: MFL1375
Important compatibility info
| Placement on Vehicle | Fuel pump to filter |
| Material | Plastic |
| Inner diameter 1 | 8 mm |
| Colour | Black |
| Inner diameter 2 | 7 mm |
| Type | Fuel Hose |
| Hose Length | 570 mm |
| Function | Fuel Hose |
ONLY
£24.26
£24.26
Part number: MFL1284
Important compatibility info
| Material | Plastic |
| Type | Fuel Hose |
| Colour | Black |
| Function | Fuel Hose |
ONLY
£24.25
£24.25
Part number: 47227
Important compatibility info
| Weight | 0.073 kg |
| Function | Hose, crankcase ventilation |
| Placement on Vehicle | Centre |
| Extra Description | febi Plus |
| Type | Hose, crankcase ventilation |
| Additional Information 2 | with quick couplers |
| Hose Length | 305 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£24.11
£24.11
Part number: MFL1290
Important compatibility info
| Colour | Black |
| Type | Fuel Hose |
| Function | Fuel Hose |
| Material | Plastic |
ONLY
£24.10
£24.10
Part number: EMH726
Important compatibility info
| Inner diameter 1 | 18 mm |
| Colour | Black |
| Type | Hose, crankcase ventilation |
| Hose Length | 280 mm |
| Function | Hose, crankcase ventilation |
| Material | Plastic |
ONLY
£24.09
£24.09
Page 11 of 29
Hose & Pipe
