Hose & Pipe

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

As part of their automotive spares and accessories range Pearl supply a range of replacement/spare hose clips suitable for automotive use. These stainless steel hose clips come as a pack of 10 size 2A hose clips. Each clip comes with a worm screw to seal the clip tightly into place.

Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.

• Pack of 10
• Made from non-corrosive stainless steel
• Normally used for clamping hose from approximately 1/2in. upwards
• Hose clips made from a band of metal passing through a worm drive

This fuel hose from Pearl Automotive is 1 metre in length and has an internal diameter of 5.5mm. It is made from NBR /PVC with a polyester outer suitable for leaded, unleaded and diesel fuels.

Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.

• Made from NBR /PVC with polyester outer suitable for leaded/unleaded and diesel engine non injection
• Supplied with two clips with an outer braided covering

• Fuel hose 5.5mm inside diameter 1m

• Heat resistant from -40 to +250 degrees celsius
• Flexible hose makes for easier routing
• Aluminium air duct hose

The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time.

In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.

• Mild steel zinc plated
• Chromium VI free finish on all materials
• Assembly by manual or automatic tools
• Solid trunion maximises torque
• Bridge piece ensures 360 deg seal
• Smooth band protects hose
• Single nut adjustment

This length of heater hose from Pearl Automotive is 1/2 inch hose. It comes in a 1m length made from MBR.CR rubber which is suitable for use with vehicle heater systems.

Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.

• Black EPDM Resistant to Weather Ozone
• Suitable for automotive heating systems with a temperature range of -40 Deg C to + 110 Deg C

• Heater hose & clips 1/2in. x 1m Made from EPDM rubber

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

As part of their automotive spares and accessories range Pearl supply a range of replacement/spare hose clips suitable for automotive use. These stainless steel hose clips come as a pack of 10 size 2X hose clips. Each clip comes with a worm screw to seal the clip tightly into place.

Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.

• Pack of 10
• Made from non-corrosive stainless steel
• Normally used for clamping hose from approximately 1/2in. upwards
• Hose clips made from a band of metal passing through a worm drive

• Pack of 5
• Parallel thread
• Airline connector

• Integral adaptor
• For use with Connect Fastflow Airline Couplings & compatible with other popular airline couplings
• Stepped Tail piece
• BSP Thread

As part of their automotive spares and accessories range Pearl supply a range of replacement/spare hose clips suitable for automotive use. These stainless steel hose clips come as a pack of 10 size 1 hose clips. Each clip comes with a worm screw to seal the clip tightly into place.

Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from electricals and exhausts to workshop consumables.

• Pack of 10
• Made from non-corrosive stainless steel
• Normally used for clamping hose from approximately 1/2in. upwards
• Hose clips made from a band of metal passing through a worm drive

This servo/air brake hose from Pearl Automotive is 3/8inch with an inside diameter of 1m. It has a working pressure bar of 10 and a burst pressure bar of 62.

Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.

• Includes clips
• Working pressure bar of 10 and a burst pressure bar of 62
• Inside diameter x 1m
• Servo air hose 3/8in. 10mm

• Compatible with other popular airline couplings
• For use with Connect Fastflow Airline Couplings

• Integral adaptor
• For use with Connect Fastflow Airline Couplings & compatible with other popular airline couplings
• Stepped Tail piece
• BSP Thread

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pack of 5 pieces
• Various sizes available
• Straight reducer 12mm - 8mm
• Suitable for fluid transfer
• Plastic pipe joiners

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

As part of their automotive spares and accessories range Pearl supply a range of replacement/spare hose clips suitable for automotive use. These stainless steel hose clips come as a pack of 10 size 1X. Each clip comes with a worm screw to seal the clip tightly into place.

Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.

• Pack of 10
• Made from non-corrosive stainless steel
• Normally used for clamping hose from approximately 1/2in. upwards
• Hose clips made from a band of metal passing through a worm drive

• Pack of 5
• Compatible with other popular airline couplings
• For use with Connect Fastflow Airline Couplings

As part of their automotive spares and accessories range Pearl supply a range of replacement/spare hose clips suitable for automotive use. These stainless steel hose clips come as a pack of 10 size 1a hose clips. Each clip comes with a worm screw to seal the clip tightly into place.

Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.

• Pack of 10
• Made from non-corrosive stainless steel
• Normally used for clamping hose from approximately 1/2in. upwards
• Hose clips made from a band of metal passing through a worm drive

• Swivel feature prevents kinking of the hose
• Specially designed valves and large aperture adaptors provide increased airflow for heavy duty applications
• Hardened shoulder helps prevent accidental disconnection

• Thread size: R 1/2
• Thread type: Male
• Nominal Bore (mm): 10.3
• Flow Rate: 117 cfm @ 100 psi
• Maximum Working Pressure: 14 bar / 200 psi

• Pack of 3
• Taper thread
• Airline connector