Hose & Pipe

• Straight Push-Fit
• Constructed of plastic that will connect two hoses

• Pack of 100
• Nylon
• Black

• 9.0mm Cable diameter

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Made from NBR /PVC with polyester outer suitable for leaded/unleaded and diesel engine non injection
• Supplied with two clips with an outer braided covering

• Fuel hose 3.2mm inside diameter x 1m including two clips

As part of their automotive spares and accessories range Pearl supply a range of replacement/spare hose clips suitable for automotive use. These heavy duty metal hose clips are size OX. They also come stored in a handy clear plastic storage box.

Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.

• Pack of 10
• Made from non-corrosive stainless steel
• Normally used for clamping hose from approximately 1/2in. upwards
• Hose clips made from a band of metal passing through a worm drive

• Heat resistant from -40 to +250 degrees celsius
• Flexible hose makes for easier routing
• Aluminium air duct hose

Pearl has established a reputation over the years for delivering high quality products. With recent expansions into a more diverse product portfolio of automotive products, its established Wot Nots' brand is still thriving. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.

• Pack of 10
• Made from mild steel zinc plated
• Hose clip that is made from a band of metal passing through a worm drive, normally used for clamping hose from approximately 1/2in. upwards

As part of their automotive spares and accessories range Pearl supply a range of replacement/spare hose clips suitable for automotive use. These heavy duty metal hose clips come as a pack of 10 size O hose clips. Each clip comes with a worm screw to seal the clip tightly into place.

Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from steering and suspension, electricals and exhausts to workshop consumables.

• Pack of 10
• Made from mild steel zinc plated
• Hose clip that is made from a band of metal passing through a worm drive, normally used for clamping hose from approximately 1/2in. upwards

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

As part of their automotive spares and accessories range Pearl supply a range of replacement/spare hose clips suitable for automotive use. These heavy duty stainless steel hose clips come as a pack of 10 size O hose clips. Each clip comes with a worm screw to seal the clip tightly into place.

Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.

• Pack of 10
• Made from non-corrosive stainless steel
• Normally used for clamping hose from approximately 1/2in. upwards
• Hose clips made from a band of metal passing through a worm drive

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

This roll of fuel hose from Pearl Automotive is a 3/16 inch hose with a 8mm internal diameter. It comes in a 1m roll made from NBR/CR suitable for leaded, unleaded and diesel fuels.

Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from electricals and exhausts to workshop consumables.

• 1m length with clips
• Suitable for use with leaded & unleaded petrol
• Made from NBR/ PVC/ CR classed as superior quality specific for unleaded injection systems.

• Fuel hose 3/16in. 5mm inside diameter x 1m including two clips

As part of their automotive spares and accessories range Pearl supply a range of replacement/spare hose clips suitable for automotive use. These stainless steel hose clips come as a pack of 10 size OO hose clips. Each clip comes with a worm screw to seal the clip tightly into place.

Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from electricals and exhausts to workshop consumables.

• Pack of 10
• Made from non-corrosive stainless steel
• Normally used for clamping hose from approximately 1/2in. upwards
• Hose clips made from a band of metal passing through a worm drive

• 1m length with clips
• Suitable for use with leaded & unleaded petrol
• Made from NBR/ PVC/ CR classed as superior quality specific for unleaded injection systems.

• Fuel hose 1/4in. 6mm inside diameter x 1m including two clips

As part of their automotive spares and accessories range Pearl supply a range of replacement/spare hose clips suitable for automotive use. These heavy duty metal hose clips come as a pack of 10 size O 22mm hose clips. Each clip comes with a worm screw to seal the clip tightly into place.

Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from electricals and exhausts to workshop consumables.

• Pack of 10
• Made from mild steel zinc plated
• Hose clip that is made from a band of metal passing through a worm drive, normally used for clamping hose from approximately 1/2in. upwards

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• 1m length with clips
• Made from PVC reinforced synthetic textile for leaded fuel use

• Fuel hose clear braided 5/16in. x 1m