Hose & Pipe

Colour Black
Inner diameter 2 7 mm
Material NBR (nitrile butadiene rubber)
Inner diameter 1 7 mm
Type Hose, crankcase ventilation
Function Hose, crankcase ventilation
Hose Length 225 mm
Gates EMH337 Crank Case Breather Pipe Hose
ONLY
£4.70
Quantity:
Title Hose Clips M/S 1A 22-30mm - Pack of 2

Additional Information

From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Wot-Nots clips are have the solution. The Mild Steel hose clips which are also known as hose clamps are manufactured with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile clips extended in various situations from home usage in plumbing, to holding and securing road sings. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
  • Size denotes the open and close span
  • Standard worm drive hose clip
Wot-Nots PWN257 Standard Hose Clips 1a 22-30mm X2
ONLY
£4.64
Quantity:
Title Hose Tail 9.5mm (3/8) i/d Hose to Male Thread R 1/4

Additional Information

Corrosive-resistant plated hose Tail Adaptor connects hose to a female fitting.
  • Connects the hose to a female fitting
  • Corrosive-resistant
  • Thread size: R 1/4
  • Thread type: Male
  • Nominal Bore (mm): 4.8
  • Flow Rate: 43 cfm @ 100 psi
  • Maximum Working Pressure: 14 bar / 200 psi
PCL HC1217 Hose Tail 9.5mm (3/8) I/D Hose To R 1/4
ONLY
£4.59
Quantity:
Title Hose Clips M/S 1X 27-40mm - Pack of 2

Additional Information

From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Wot-Nots clips are have the solution. The Mild Steel hose clips which are also known as hose clamps are manufactured with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile clips extended in various situations from home usage in plumbing, to holding and securing road sings. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
  • Size denotes the open and close span
  • Standard worm drive hose clip
Wot-Nots PWN259 Standard Hose Clips 1x 27-40mm X2
ONLY
£4.57
Quantity:
Title Hose Clips M/S 1 25-35mm - Pack of 2

Additional Information

From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Wot-Nots clips are have the solution. The Mild Steel hose clips which are also known as hose clamps are manufactured with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile clips extended in various situations from home usage in plumbing, to holding and securing road sings. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
  • Size denotes the open and close span
  • Standard worm drive hose clip
Wot-Nots PWN258 Standard Hose Clips 1 25-35mm X2
ONLY
£4.56
Quantity:
Title Hose Connector - Y Piece Push-Fit - 10mm

Additional Information

Over time small parts deteriorate. To avoid a drop in your vehicles efficiency and performance you may need to replace these from time to time to ensure that you vehicle is running effectively and efficiently. Wot-Nots provide a wide range of replacement parts and accessories to cater for a wide range of circumstances. This hose connector from Wot-Nots comes in a single pack. It is a 'Y' piece connector with a size of 10mm. Ideal as a spare or replacement pack for joining and connecting pipes and tubing. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
  • Waterproof
  • Connects three hoses
  • Constructed of plastic
Wot-Nots PWN532 Hose Connector 10mm Y Piece
ONLY
£4.54
Quantity:
Title Bypass Hose Clip - British Leyland A Series

Additional Information

From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Wot-Nots clips are have the solution. The Mild Steel hose clips which are also known as hose clamps are manufactured with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile clips extended in various situations from home usage in plumbing, to holding and securing road sings. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
  • Supplied with clips
  • Flexible rubber, replacement for the solid OE type
  • Replacement hose & clip for the bypass from cylinder head to water pump
Wot-Nots PWN187 Bypass Hose Clip Bl A Series
ONLY
£4.49
Quantity:
Part number: BHC2001S
Function Fastening Clamp, charge air hose
Diameter To 48 mm
Diameter From 54 mm
Quantity 1
Type Fastening Clamp, charge air hose
Borg & Beck BHC2001S HORSESHOE CLIP
ONLY
£4.47
Quantity:
Part number: BHC2004S
Function Fastening Clamp, charge air hose
Diameter To 59 mm
Diameter From 67 mm
Quantity 1
Type Fastening Clamp, charge air hose
Borg & Beck BHC2004S HORSESHOE CLIP
ONLY
£4.47
Quantity:
Part number: FHC2001S
Function Fastening Clamp, charge air hose
Diameter To 48 mm
Diameter From 54 mm
Quantity 1
Type Fastening Clamp, charge air hose
First Line FHC2001S Horse Shoe Clip
ONLY
£4.47
Quantity:

Page 87 of 90
Hose & Pipe

Your feedback more
Trusted reviews more
Secure payments more
Simple returns more