Hose & Pipe
Important compatibility info
Title | Worm Drive Hose Clips 10 - 16 mm - Pack of 10 |
Additional Information
- Reliable and strong
- Perforated band design
- Convenient pack size
- Bright zinc plated for extra protection
- Quality product
- Quality product made from Bright Zinc Plated mild steel
Important compatibility info
Title | Worm Drive Hose Clips 16 - 25 mm - Pack of 10 |
Additional Information
- Reliable and strong
- Perforated band design
- Convenient pack size
- Bright zinc plated for extra protection
- Quality product
- Quality product made from Bright Zinc Plated mild steel
Important compatibility info
Function | Fastening Clamp, charge air hose |
Diameter To | 48 mm |
Diameter From | 54 mm |
Quantity | 1 |
Type | Fastening Clamp, charge air hose |
Important compatibility info
Function | Fastening Clamp, charge air hose |
Diameter To | 59 mm |
Diameter From | 67 mm |
Quantity | 1 |
Type | Fastening Clamp, charge air hose |
Important compatibility info
Function | Fastening Clamp, charge air hose |
Diameter To | 48 mm |
Diameter From | 54 mm |
Quantity | 1 |
Type | Fastening Clamp, charge air hose |
Important compatibility info
Title | Bypass Hose Clip - British Leyland A Series |
Additional Information
- Supplied with clips
- Flexible rubber, replacement for the solid OE type
- Replacement hose & clip for the bypass from cylinder head to water pump
Important compatibility info
Title | Hose Connector - Y Piece Push-Fit - 10mm |
Additional Information
- Waterproof
- Connects three hoses
- Constructed of plastic
Important compatibility info
Title | Hose Clips S/S OOO 8-12mm - Pack of 2 |
Additional Information
- Made from non corrosive stainless steel
- Normally used for clamping hose from approximately 1/2in. upwards
- Hose clip that is made from a band of metal passing through a worm drive
Important compatibility info
Title | Hose Clips M/S 1 25-35mm - Pack of 2 |
Additional Information
- Size denotes the open and close span
- Standard worm drive hose clip
Important compatibility info
Title | Hose Tail 9.5mm (3/8) i/d Hose to Male Thread R 1/4 |
Additional Information
- Connects the hose to a female fitting
- Corrosive-resistant
- Thread size: R 1/4
- Thread type: Male
- Nominal Bore (mm): 4.8
- Flow Rate: 43 cfm @ 100 psi
- Maximum Working Pressure: 14 bar / 200 psi
Important compatibility info
Title | Hose Clips M/S 1X 27-40mm - Pack of 2 |
Additional Information
- Size denotes the open and close span
- Standard worm drive hose clip
Important compatibility info
Title | Hose Clips M/S 1A 22-30mm - Pack of 2 |
Additional Information
- Size denotes the open and close span
- Standard worm drive hose clip
Important compatibility info
Title | Hose Clips S/S OX 16-25mm - Pack of 2 |
Additional Information
- Made from non corrosive stainless steel
- Normally used for clamping hose from approximately 1/2in. upwards
- Hose clip that is made from a band of metal passing through a worm drive
Important compatibility info
Type | Fuel Hose |
Inner diameter 2 | 8.5 mm |
Colour | Black |
Inner diameter 1 | 7.5 mm |
Function | Fuel Hose |
Material | HNBR (hydrogenated nitrile butadiene rubber) |
Hose Length | 185 mm |
Placement on Vehicle | from fuel tank to fuel pump |
Important compatibility info
Colour | Black |
Material | NBR (nitrile butadiene rubber) |
Function | Hose, crankcase ventilation |
Type | Hose, crankcase ventilation |
Inner diameter 1 | 11 mm |
Hose Length | 90 mm |
Inner diameter 2 | 11 mm |
Important compatibility info
Title | Hose Connector - T Piece Push-Fit - 5mm - Pack Of 10 |
Additional Information
- Pack of 10
- T Piece Push-Fit
- Constructed of plastic that will connect two hoses
Important compatibility info
Title | Hose Connector - Y Piece Push-Fit - 6mm - Pack Of 2 |
Additional Information
- Waterproof
- Connects three hoses
- Constructed of plastic
Important compatibility info
Title | Hose Clips M/S 2 40-55mm - Single Pack |
Additional Information
- Size denotes the open and close span
- Standard worm drive hose clip
Important compatibility info
Title | Hose Clips S/S 2 40-60mm - Single Pack |
Additional Information
- Made from non corrosive stainless steel
- Normally used for clamping hose from approximately 1/2in. upwards
- Hose clip that is made from a band of metal passing through a worm drive
Important compatibility info
Title | Hose Connector - Straight Push-Fit - 8mm - Pack Of 2 |
Additional Information
- Waterproof
- Connects two hoses
- Constructed of plastic