Proud to be a UK-based company
Contact usHose & Pipe
invoice Page 14 of 49
Results 261 - 280 of 971
Part number: 35185
Important compatibility info
| Title | Cyclone Female Coupling - 3/8in. BSP - Pack Of 2 |
Additional Information
- Pack of 2
- For use with Connect Fastflow Airline Couplings & compatible with other popular airline couplings
- Quick Release coupling
- Female Screwed Entry
- BSP Thread
ONLY
£12.50
£12.50
Part number: 35183
Important compatibility info
| Title | Fastflow Standard Male Adaptor - 1/2in. BSP - Pack Of 5 |
Additional Information
- Pack of 5
- Compatible with other popular airline couplings
- For use with Connect Fastflow Airline Couplings
ONLY
£12.51
£12.51
Part number: EMH516
Important compatibility info
| Hose Length | 278 mm |
| Inner diameter 2 | 15 mm |
| Inner diameter 1 | 13 mm |
| Material | NBR (nitrile butadiene rubber) |
| Colour | Black |
| Function | Hose, crankcase ventilation |
| Type | Hose, crankcase ventilation |
ONLY
£12.53
£12.53
Part number: 36730
Important compatibility info
| Material | PA (polyamide) |
| Weight | 0.79 kg |
| Outer diameter | 17 mm |
| Inner diameter | 10 mm |
| Function | Hose, crankcase ventilation |
| Placement on Vehicle | Lower |
| Extra Description | febi Plus |
| Type | Hose, crankcase ventilation |
| Hose Length | 265 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£12.59
£12.59
Part number: 2960-00051
Important compatibility info
| Additional Information 3 | Resists weathering, abrasion and tearing. |
| Specification | Meets military specifications MILR3065C. |
| Additional Information 2 | Specially compounded rubber conducts static electricity. |
| Additional Information | Discharges potentially dangerous static electricity from equipment when properly grounded, up to 100 ohm-cm (maximum). |
ONLY
£12.61
£12.61
Part number: PPC04
Important compatibility info
| Title | Petrol Pipe Clips 13-14mm - Pack of 25 |
Additional Information
Over time small parts and componentry can deteriorate. To avoid a drop in your vehicles efficiency and performance you may need to replace these from time to time to ensure that you vehicle is running effectively and efficiently. Pearl Automotive provide a wide range of replacement parts and accessories to cater for a wide range of circumstances. The Pearl Petrol pipe clips come in a pack of 25 and can be used when replacing or securing fuel hoses which are between 13mm – 14mm. Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.
- Pack of 25
- These clips do not lose their shape when tightened
- Specifically designed for petrol hose
ONLY
£12.62
£12.62
Part number: EMH608
Important compatibility info
| Inner diameter 2 | 18 mm |
| Inner diameter 1 | 18 mm |
| Hose Length | 255 mm |
| Placement on Vehicle | from cylinder head cover to oil separator |
| Material | NBR (nitrile butadiene rubber) |
| Colour | Black |
| Function | Hose, crankcase ventilation |
| Type | Hose, crankcase ventilation |
ONLY
£12.65
£12.65
Part number: PHC11X
Important compatibility info
| Title | Hose Clips M/S 4 70-90mm - Pack of 10 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Pearl Automotive will have the solution for many of these replacement problems.
As part of their automotive spares and accessories range Pearl supply a range of replacement/spare hose clips suitable for automotive use. These heavy duty metal hose clips come as a pack of 10 size 4 hose clips. Each clip comes with a worm screw to seal the clip tightly into place.
Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.
Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, hose clips are the industry standard. The applications for the versatile hose clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. As part of their automotive spares and accessories range Pearl supply a range of replacement/spare hose clips suitable for automotive use. These heavy duty metal hose clips come as a pack of 10 size 4 hose clips. Each clip comes with a worm screw to seal the clip tightly into place. Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.
- Pack of 10
- Made from mild steel zinc plated
- Hose clip that is made from a band of metal passing through a worm drive, normally used for clamping hose from approximately 1/2in. upwards
ONLY
£12.75
£12.75
Part number: BHC2006
Important compatibility info
| Type | Fastening Clamp, charge air hose |
| Function | Fastening Clamp, charge air hose |
| Diameter To | 58 mm |
| Diameter From | 64 mm |
| Quantity | 5 |
ONLY
£12.80
£12.80
Part number: FHC2000
Important compatibility info
| Thickness | 2.1 mm |
| Function | Fastening Clamp, charge air hose |
| Diameter To | 48 mm |
| Diameter From | 55 mm |
| Quantity | 5 |
| Type | Fastening Clamp, charge air hose |
ONLY
£12.80
£12.80
Part number: FHC2006
Important compatibility info
| Function | Fastening Clamp, charge air hose |
| Diameter To | 58 mm |
| Diameter From | 64 mm |
| Quantity | 5 |
| Type | Fastening Clamp, charge air hose |
ONLY
£12.80
£12.80
Part number: QFH10
Important compatibility info
| Type | Fuel Hose |
| Inner diameter | 3.2 mm |
| Function | Fuel Hose |
| Hose Length | 1000 mm |
ONLY
£12.81
£12.81
Part number: PPH17C
Important compatibility info
| Title | Rubber Fuel Hose & Clips 12mm x 1m |
Additional Information
Over time hoses and pipes deteriorate. To avoid drips and leaks you may need to replace these from time to time to ensure that you vehicle is running effectively and efficiently. Pearl Automotive provide a wide range of replacement parts and accessories to cater for a wide range of circumstances.
This roll of fuel hose from Pearl Automotive is ¼ inch hose with a 6mm internal diameter. It comes in a 1m roll made from MBR.CR suitable for leaded and unleaded fuels.
Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.
Over time small parts deteriorate. To avoid a drop in your vehicles efficiency and performance you may need to replace these from time to time to ensure that you vehicle is running effectively and efficiently. Pearl Automotive provide a wide range of replacement parts and accessories to cater for a wide range of circumstances. This roll of fuel hose from Pearl Automotive is ¼ inch hose with a 6mm internal diameter. It comes in a 1m roll made from MBR.CR suitable for leaded and unleaded fuels. Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.
- 1m length with clips
- Suitable for use with leaded & unleaded petrol
- Made from NBR/ PVC/ CR classed as superior quality specific for unleaded injection systems.
ONLY
£12.83
£12.83
Part number: EMH223
Important compatibility info
| Hose Length | 125 mm |
| Inner diameter 1 | 20 mm |
| Material | NBR (nitrile butadiene rubber) |
| Colour | Black |
| Function | Hose, crankcase ventilation |
| Type | Hose, crankcase ventilation |
| Inner diameter 2 | 20 mm |
ONLY
£12.84
£12.84
Part number: JSC035MSP
Important compatibility info
| Title | Superclamp M/S 32-35mm - Pack of 5 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- Mild steel zinc plated
- Chromium VI free finish on all materials
- Assembly by manual or automatic tools
- Solid trunion maximises torque
- Bridge piece ensures 360 deg seal
- Smooth band protects hose
- Single nut adjustment
ONLY
£12.85
£12.85
Part number: 26158
Important compatibility info
| Weight | 0.118 kg |
| Placement on Vehicle | both sides |
| Function | Hose, crankcase ventilation |
| Type | Hose, crankcase ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£12.92
£12.92
Part number: MFL1269
Important compatibility info
| Colour | Black |
| Function | Fuel Hose |
| Material | Plastic |
| Type | Fuel Hose |
ONLY
£12.92
£12.92
Part number: MFL1272
Important compatibility info
| Colour | White-transparent |
| Function | Fuel Hose |
| Type | Fuel Hose |
| Material | Plastic |
| Placement on Vehicle | between fuel filter and injection pump |
ONLY
£12.92
£12.92
Part number: 31061
Important compatibility info
| Title | Hose Connector - Stem Reducer Push-Fit - 8mm To 6mm - Pack Of 10 |
Additional Information
- Qty: 10
- ISO9001:2008
- Metric Sizes
- Push Fit Connector
ONLY
£12.95
£12.95
Part number: 100732
Important compatibility info
| Function | Hydraulic Hose, steering |
| Outer diameter | 22 mm |
| Type | Hydraulic Hose, steering |
| Weight | 0.111 kg |
| Inner diameter | 16 mm |
| Length | 315 mm |
| Width | 200 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£13.00
£13.00
Page 14 of 49
Hose & Pipe
