Proud to be a UK-based company
Contact usHose & Pipe
invoice Page 10 of 33
Results 271 - 300 of 969
Part number: BHC2006
Important compatibility info
| Type | Fastening Clamp, charge air hose |
| Function | Fastening Clamp, charge air hose |
| Diameter To | 58 mm |
| Diameter From | 64 mm |
| Quantity | 5 |
ONLY
£12.80
£12.80
Part number: FHC2000
Important compatibility info
| Thickness | 2.1 mm |
| Function | Fastening Clamp, charge air hose |
| Diameter To | 48 mm |
| Diameter From | 55 mm |
| Quantity | 5 |
| Type | Fastening Clamp, charge air hose |
ONLY
£12.80
£12.80
Part number: FHC2006
Important compatibility info
| Function | Fastening Clamp, charge air hose |
| Diameter To | 58 mm |
| Diameter From | 64 mm |
| Quantity | 5 |
| Type | Fastening Clamp, charge air hose |
ONLY
£12.80
£12.80
Part number: QFH10
Important compatibility info
| Type | Fuel Hose |
| Inner diameter | 3.2 mm |
| Function | Fuel Hose |
| Hose Length | 1000 mm |
ONLY
£12.81
£12.81
Part number: PPH17C
Important compatibility info
| Title | Rubber Fuel Hose & Clips 12mm x 1m |
Additional Information
Over time hoses and pipes deteriorate. To avoid drips and leaks you may need to replace these from time to time to ensure that you vehicle is running effectively and efficiently. Pearl Automotive provide a wide range of replacement parts and accessories to cater for a wide range of circumstances.
This roll of fuel hose from Pearl Automotive is ¼ inch hose with a 6mm internal diameter. It comes in a 1m roll made from MBR.CR suitable for leaded and unleaded fuels.
Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.
Over time small parts deteriorate. To avoid a drop in your vehicles efficiency and performance you may need to replace these from time to time to ensure that you vehicle is running effectively and efficiently. Pearl Automotive provide a wide range of replacement parts and accessories to cater for a wide range of circumstances. This roll of fuel hose from Pearl Automotive is ¼ inch hose with a 6mm internal diameter. It comes in a 1m roll made from MBR.CR suitable for leaded and unleaded fuels. Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.
- 1m length with clips
- Suitable for use with leaded & unleaded petrol
- Made from NBR/ PVC/ CR classed as superior quality specific for unleaded injection systems.
ONLY
£12.83
£12.83
Part number: JSC035MSP
Important compatibility info
| Title | Superclamp M/S 32-35mm - Pack of 5 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- Mild steel zinc plated
- Chromium VI free finish on all materials
- Assembly by manual or automatic tools
- Solid trunion maximises torque
- Bridge piece ensures 360 deg seal
- Smooth band protects hose
- Single nut adjustment
ONLY
£12.85
£12.85
Part number: 26158
Important compatibility info
| Weight | 0.118 kg |
| Placement on Vehicle | both sides |
| Function | Hose, crankcase ventilation |
| Type | Hose, crankcase ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£12.92
£12.92
Part number: MFL1269
Important compatibility info
| Colour | Black |
| Function | Fuel Hose |
| Material | Plastic |
| Type | Fuel Hose |
ONLY
£12.92
£12.92
Part number: MFL1272
Important compatibility info
| Colour | White-transparent |
| Function | Fuel Hose |
| Type | Fuel Hose |
| Material | Plastic |
| Placement on Vehicle | between fuel filter and injection pump |
ONLY
£12.92
£12.92
Part number: 100732
Important compatibility info
| Function | Hydraulic Hose, steering |
| Outer diameter | 22 mm |
| Type | Hydraulic Hose, steering |
| Weight | 0.111 kg |
| Inner diameter | 16 mm |
| Length | 315 mm |
| Width | 200 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£13.00
£13.00
Part number: EMH364
Important compatibility info
| Material | Rubber |
| Inner diameter 1 | 12.5 mm |
| Colour | Black |
| Inner diameter 2 | 12.5 mm |
| Type | Hose, crankcase ventilation |
| Hose Length | 250 mm |
| Function | Hose, crankcase ventilation |
ONLY
£13.01
£13.01
Part number: 31056
Important compatibility info
| Title | Hose Connector - 2 Way Divider Push-Fit - 6.0mm - Pack Of 5 |
Additional Information
- Equal Openings
- ISO9001:2008
- 6.0mm x 6.0mm
ONLY
£13.10
£13.10
Part number: BHC2000
Important compatibility info
| Type | Fastening Clamp, charge air hose |
| Thickness | 2.1 mm |
| Function | Fastening Clamp, charge air hose |
| Diameter To | 48 mm |
| Diameter From | 55 mm |
| Quantity | 5 |
ONLY
£13.14
£13.14
Part number: 1AMS
Important compatibility info
| Title | Hose Clips M/S 1A 22-30mm - Box of 10 |
Additional Information
Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time.
In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- Mild steel zinc protected
- Independently tested by the British Standards Institute (BSi) and carry the British Standard Kitemark™ BS 5315:1991
- The smooth inside profile of the band and rolled edges give protection for all types of hoses including soft hoses made from rubber or silicone
- The band is continuously threaded to enable extra flexibility when adjusting the clip to the correct size
- The original worm drive hose clip
ONLY
£13.14
£13.14
Part number: MFL1151
Important compatibility info
| Function | Fuel Hose |
| Colour | White-transparent |
| Material | Plastic |
| Hose Length | 180 mm |
| Inner diameter 1 | 11 mm |
| Inner diameter 2 | 6 mm |
| Type | Fuel Hose |
| Placement on Vehicle | Between heat exchanger and fuel filter |
ONLY
£13.15
£13.15
Part number: JSC039MSP
Important compatibility info
| Title | Superclamp M/S 36-39mm - Pack of 5 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- Mild steel zinc plated
- Chromium VI free finish on all materials
- Assembly by manual or automatic tools
- Solid trunion maximises torque
- Bridge piece ensures 360 deg seal
- Smooth band protects hose
- Single nut adjustment
ONLY
£13.22
£13.22
Part number: MFL1270
Important compatibility info
| Inner diameter 2 | 6 mm |
| Inner diameter 1 | 6 mm |
| Function | Fuel Hose |
| Type | Fuel Hose |
| Colour | White-transparent |
| Material | Plastic |
| Hose Length | 240 mm |
| Placement on Vehicle | Between heat exchanger and fuel filter |
ONLY
£13.23
£13.23
Part number: 31020
Important compatibility info
| Title | Hose Connector - Straight Push-Fit - 4.0mm - Pack Of 10 |
Additional Information
- ISO9001:2008
- Push Fit Connector
ONLY
£13.24
£13.24
Part number: 1MS
Important compatibility info
| Title | Hose Clips M/S 1 25-35mm - Box of 10 |
Additional Information
Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time.
In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- Mild steel zinc protected
- Independently tested by the British Standards Institute (BSi) and carry the British Standard Kitemark™ BS 5315:1991
- The smooth inside profile of the band and rolled edges give protection for all types of hoses including soft hoses made from rubber or silicone
- The band is continuously threaded to enable extra flexibility when adjusting the clip to the correct size
- The original worm drive hose clip
ONLY
£13.28
£13.28
Part number: EMH782
Important compatibility info
| Colour | Black |
| Inner diameter 2 | 7 mm |
| Type | Hose, crankcase ventilation |
| Material | NBR (nitrile butadiene rubber) |
| Inner diameter 1 | 13 mm |
| Function | Hose, crankcase ventilation |
| Hose Length | 220 mm |
ONLY
£13.30
£13.30
Part number: BHC2007
Important compatibility info
| Type | Fastening Clamp, charge air hose |
| Function | Fastening Clamp, charge air hose |
| Diameter To | 44 mm |
| Diameter From | 53 mm |
| Quantity | 5 |
ONLY
£13.35
£13.35
Part number: FHC2007
Important compatibility info
| Function | Fastening Clamp, charge air hose |
| Diameter To | 44 mm |
| Diameter From | 53 mm |
| Quantity | 5 |
| Type | Fastening Clamp, charge air hose |
ONLY
£13.35
£13.35
Part number: 7030
Important compatibility info
| Operating temperature to | +100 °C |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Operating temperature from | -40 °C |
| Hose length | 0.4 m |
| Function | Hose |
| Working pressure | 3 bar |
| Inner diameter 2 | 30 mm |
| Inner diameter 1 | 30 mm |
| Type | Hose |
ONLY
£13.35
£13.35
Part number: 7743-01038
Important compatibility info
| Title | Flexible Air Duct Hose - 38mm - 1 Meter |
Additional Information
- Heat resistant from -40 to +250 degrees celsius
- Flexible hose makes for easier routing
- Aluminium air duct hose
ONLY
£13.35
£13.35
Part number: MFL1275
Important compatibility info
| Inner diameter 2 | 6 mm |
| Function | Fuel Hose |
| Colour | White-transparent |
| Inner diameter 1 | 6 mm |
| Hose Length | 160 mm |
| Type | Fuel Hose |
| Material | Plastic |
| Placement on Vehicle | between fuel filter and injection pump |
ONLY
£13.36
£13.36
Part number: 30809
Important compatibility info
| Title | Hose Connector - Straight Push-Fit - 5mm x 45mm - Pack Of 10 |
Additional Information
- ISO9001:2008
- Push Fit Connector
- 5.0mm ID x 45.0mm
ONLY
£13.37
£13.37
Part number: 2960-00052
Important compatibility info
ONLY
£13.42
£13.42
Part number: BHC2003
Important compatibility info
| Quantity | 5 |
| Diameter From | 66 mm |
| Diameter To | 58 mm |
| Type | Fastening Clamp, charge air hose |
| Function | Fastening Clamp, charge air hose |
ONLY
£13.43
£13.43
Part number: FHC2003
Important compatibility info
| Function | Fastening Clamp, charge air hose |
| Diameter To | 58 mm |
| Diameter From | 66 mm |
| Quantity | 5 |
| Type | Fastening Clamp, charge air hose |
ONLY
£13.43
£13.43
Part number: 7743-01040
Important compatibility info
| Title | Flexible Air Duct Hose - 40mm - 1 Meter |
Additional Information
- Heat resistant from -40 to +250 degrees celsius
- Flexible hose makes for easier routing
- Aluminium air duct hose
ONLY
£13.45
£13.45
Page 10 of 33
Hose & Pipe
