Proud to be a UK-based company
Contact usHose & Pipe
invoice Page 2 of 33
Results 31 - 60 of 973
Part number: PWN589
Important compatibility info
| Title | Hose Clips S/S OX 16-25mm - Pack of 2 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Wot-Nots clips are have the solution. The Mild Steel hose clips which are also known as hose clamps are manufactured with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile clips extended in various situations from home usage in plumbing, to holding and securing road sings. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Made from non corrosive stainless steel
- Normally used for clamping hose from approximately 1/2in. upwards
- Hose clip that is made from a band of metal passing through a worm drive
ONLY
£4.58
£4.58
Part number: HC1217
Important compatibility info
| Title | Hose Tail 9.5mm (3/8) i/d Hose to Male Thread R 1/4 |
Additional Information
Corrosive-resistant plated hose Tail Adaptor connects hose to a female fitting.
- Connects the hose to a female fitting
- Corrosive-resistant
- Thread size: R 1/4
- Thread type: Male
- Nominal Bore (mm): 4.8
- Flow Rate: 43 cfm @ 100 psi
- Maximum Working Pressure: 14 bar / 200 psi
ONLY
£4.59
£4.59
Part number: PWN257
Important compatibility info
| Title | Hose Clips M/S 1A 22-30mm - Pack of 2 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Wot-Nots clips are have the solution. The Mild Steel hose clips which are also known as hose clamps are manufactured with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile clips extended in various situations from home usage in plumbing, to holding and securing road sings. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Size denotes the open and close span
- Standard worm drive hose clip
ONLY
£4.64
£4.64
Part number: EMH337
Important compatibility info
| Colour | Black |
| Inner diameter 2 | 7 mm |
| Material | NBR (nitrile butadiene rubber) |
| Inner diameter 1 | 7 mm |
| Type | Hose, crankcase ventilation |
| Function | Hose, crankcase ventilation |
| Hose Length | 225 mm |
ONLY
£4.70
£4.70
Part number: MFL1110
Important compatibility info
| Type | Fuel Hose |
| Inner diameter 2 | 8.5 mm |
| Colour | Black |
| Inner diameter 1 | 7.5 mm |
| Function | Fuel Hose |
| Material | HNBR (hydrogenated nitrile butadiene rubber) |
| Hose Length | 185 mm |
| Placement on Vehicle | from fuel tank to fuel pump |
ONLY
£4.71
£4.71
Part number: EMH578
Important compatibility info
| Colour | Black |
| Material | NBR (nitrile butadiene rubber) |
| Function | Hose, crankcase ventilation |
| Type | Hose, crankcase ventilation |
| Inner diameter 1 | 11 mm |
| Hose Length | 90 mm |
| Inner diameter 2 | 11 mm |
ONLY
£4.83
£4.83
Part number: PHC674
Important compatibility info
| Title | Hose Connector - T Piece Push-Fit - 5mm - Pack Of 10 |
Additional Information
Over time small parts and componentry can deteriorate. To avoid a drop in your vehicles efficiency and performance you may need to replace these from time to time to ensure that you vehicle is running effectively and efficiently. Pearl Automotive provide a wide range of replacement parts and accessories to cater for a wide range of circumstances. As part of their repairs and replacements range Pearl have designed a range of hoses for a wide range of applications. This Pearl Hose Connector comes in a pack of 10. The connector is a t-piece type, meaning it will connect three hoses, and has a 5mm outside diameter. Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.
- Pack of 10
- T Piece Push-Fit
- Constructed of plastic that will connect two hoses
ONLY
£4.90
£4.90
Part number: PWN261
Important compatibility info
| Title | Hose Clips M/S 2 40-55mm - Single Pack |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Wot-Nots clips are have the solution. The Mild Steel hose clips which are also known as hose clamps are manufactured with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile clips extended in various situations from home usage in plumbing, to holding and securing road sings. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Size denotes the open and close span
- Standard worm drive hose clip
ONLY
£4.94
£4.94
Part number: PWN594
Important compatibility info
| Title | Hose Clips S/S 2 40-60mm - Single Pack |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Wot-Nots clips are have the solution. The Mild Steel hose clips which are also known as hose clamps are manufactured with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile clips extended in various situations from home usage in plumbing, to holding and securing road sings. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Made from non corrosive stainless steel
- Normally used for clamping hose from approximately 1/2in. upwards
- Hose clip that is made from a band of metal passing through a worm drive
ONLY
£4.94
£4.94
Part number: PWN530
Important compatibility info
| Title | Hose Connector - Y Piece Push-Fit - 6mm - Pack Of 2 |
Additional Information
Over time small parts deteriorate. To avoid a drop in your vehicles efficiency and performance you may need to replace these from time to time to ensure that you vehicle is running effectively and efficiently. Wot-Nots provide a wide range of replacement parts and accessories to cater for a wide range of circumstances. This hose connector from Wot-Nots comes in a pack of 2. It is a 'Y' piece connector with a size of 6mm. Ideal as a spare or replacement pack for joining and connecting pipes and tubing. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Waterproof
- Connects three hoses
- Constructed of plastic
ONLY
£4.95
£4.95
Part number: PWN525
Important compatibility info
| Title | Hose Connector - Straight Push-Fit - 8mm - Pack Of 2 |
Additional Information
Over time small parts deteriorate. To avoid a drop in your vehicles efficiency and performance you may need to replace these from time to time to ensure that you vehicle is running effectively and efficiently. Wot-Nots provide a wide range of replacement parts and accessories to cater for a wide range of circumstances. As part of their repairs and replacements range Wot-Nots have designed a range of hoses for a wide range of applications. This Wot-Nots Hose Connector comes in a pack of 2. The connector is a straight type and is 8mm. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Waterproof
- Connects two hoses
- Constructed of plastic
ONLY
£4.96
£4.96
Part number: 83404
Important compatibility info
| Title | R Clips - 4mm - Pack of 10 |
Additional Information
- Bulk packed x 10 in poly bag
- R Clips 4mm diameter
- Length 75mm
ONLY
£5.11
£5.11
Part number: 102470
Important compatibility info
| Length | 40.5 mm |
| Inner diameter | 14 mm |
| Inner diameter 1 | 10 mm |
| Function | Overflow Pipe, oil sump (automatic transmission) |
| for SA code | A89 |
| Weight | 0.003 kg |
| Type | Overflow Pipe, oil sump (automatic transmission) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£5.13
£5.13
Part number: AXC00162
Important compatibility info
| Title | Worm Drive Hose Clips 12 - 20 mm - Pack of 10 |
Additional Information
Worm Drive Hose Clips 12 - 20 mm - Pack of 10
- Reliable and strong
- Perforated band design
- Convenient pack size
- Bright zinc plated for extra protection
- Quality product
- Quality product made from Bright Zinc Plated mild steel
ONLY
£5.22
£5.22
Part number: 83405
Important compatibility info
| Title | R Clips - 5mm - Pack of 10 |
Additional Information
- Bulk packed x 10 in poly bag
- R Clips 5mm diameter
- Length 110mm
ONLY
£5.22
£5.22
Part number: EMH325
Important compatibility info
| Function | Hose, crankcase ventilation |
| Inner diameter 1 | 18 mm |
| Material | NBR (nitrile butadiene rubber) |
| Hose Length | 126 mm |
| Colour | Black |
| Inner diameter 2 | 18 mm |
| Type | Hose, crankcase ventilation |
ONLY
£5.30
£5.30
Part number: BHC2009S
Important compatibility info
| Type | Fastening Clamp, charge air hose |
| Function | Fastening Clamp, charge air hose |
| Diameter To | 51 mm |
| Diameter From | 56 mm |
| Quantity | 1 |
ONLY
£5.37
£5.37
Part number: FHC2009S
Important compatibility info
| Function | Fastening Clamp, charge air hose |
| Diameter To | 51 mm |
| Diameter From | 56 mm |
| Quantity | 1 |
| Type | Fastening Clamp, charge air hose |
ONLY
£5.37
£5.37
Part number: PWN527
Important compatibility info
| Title | Hose Connector - Straight Push-Fit - 16mm - Pack Of 2 |
Additional Information
Over time small parts deteriorate. To avoid a drop in your vehicles efficiency and performance you may need to replace these from time to time to ensure that you vehicle is running effectively and efficiently. Wot-Nots provide a wide range of replacement parts and accessories to cater for a wide range of circumstances. As part of their repairs and replacements range Wot-Nots have designed a range of hoses for a wide range of applications. This Wot-Nots Hose Connector comes in a pack of 2. The connector is a straight type and is 16mm. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Waterproof
- Connects two hoses
- Constructed of plastic
ONLY
£5.37
£5.37
Part number: PWN526
Important compatibility info
| Title | Hose Connector - Straight Push-Fit - 13mm - Pack Of 2 |
Additional Information
Over time small parts deteriorate. To avoid a drop in your vehicles efficiency and performance you may need to replace these from time to time to ensure that you vehicle is running effectively and efficiently. Wot-Nots provide a wide range of replacement parts and accessories to cater for a wide range of circumstances. As part of their repairs and replacements range Wot-Nots have designed a range of hoses for a wide range of applications. This Wot-Nots Hose Connector comes in a pack of 2. The connector is a straight type and is 13mm. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Waterproof
- Connects two hoses
- Constructed of plastic
ONLY
£5.41
£5.41
Part number: AXC00165
Important compatibility info
| Title | Worm Drive Hose Clips 20 - 32 mm - Pack of 10 |
Additional Information
Worm Drive Hose Clips 20 - 32 mm - Pack of 10
- Reliable and strong
- Perforated band design
- Convenient pack size
- Bright zinc plated for extra protection
- Quality product
- Quality product made from Bright Zinc Plated mild steel
ONLY
£5.49
£5.49
Part number: PWN260
Important compatibility info
| Title | Hose Clips M/S 2A 35-50mm - Pack of 2 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Wot-Nots clips are have the solution. The Mild Steel hose clips which are also known as hose clamps are manufactured with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile clips extended in various situations from home usage in plumbing, to holding and securing road sings. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Size denotes the open and close span
- Standard worm drive hose clip
ONLY
£5.49
£5.49
Part number: 46383
Important compatibility info
| Weight | 0.004 kg |
| Extra Description | febi Plus |
| Material | NBR (nitrile butadiene rubber) |
| Inner diameter | 11 mm |
| Inner diameter 1 | 6 mm |
| Function | Hose, crankcase ventilation |
| Type | Hose, crankcase ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£5.52
£5.52
Part number: AXC00166
Important compatibility info
| Title | Worm Drive Hose Clips 23 - 35 mm - Pack of 10 |
Additional Information
Worm Drive Hose Clips 23 - 35 mm - Pack of 10
- Reliable and strong
- Perforated band design
- Convenient pack size
- Bright zinc plated for extra protection
- Quality product
- Quality product made from Bright Zinc Plated mild steel
ONLY
£5.57
£5.57
Part number: EMH655
Important compatibility info
| Colour | Black |
| Inner diameter 1 | 8 mm |
| Material | NBR (nitrile butadiene rubber) |
| Function | Hose, crankcase ventilation |
| Hose Length | 80 mm |
| Type | Hose, crankcase ventilation |
| Inner diameter 2 | 8 mm |
ONLY
£5.59
£5.59
Part number: AXC00167
Important compatibility info
| Title | Worm Drive Hose Clips 25 - 40 mm - Pack of 10 |
Additional Information
Worm Drive Hose Clips 25 - 40 mm - Pack of 10
- Reliable and strong
- Perforated band design
- Convenient pack size
- Bright zinc plated for extra protection
- Quality product
- Quality product made from Bright Zinc Plated mild steel
ONLY
£5.62
£5.62
Part number: AXC00168
Important compatibility info
| Title | Worm Drive Hose Clips 32 - 50 mm - Pack of 10 |
Additional Information
Worm Drive Hose Clips 32 - 50 mm - Pack of 10
- Reliable and strong
- Perforated band design
- Convenient pack size
- Bright zinc plated for extra protection
- Quality product
- Quality product made from Bright Zinc Plated mild steel
ONLY
£5.68
£5.68
Part number: AXC00169
Important compatibility info
| Title | Worm Drive Hose Clips 40 - 60 mm - Pack of 10 |
Additional Information
Worm Drive Hose Clips 40 - 60 mm - Pack of 10
- Reliable and strong
- Perforated band design
- Convenient pack size
- Bright zinc plated for extra protection
- Quality product
- Quality product made from Bright Zinc Plated mild steel
ONLY
£5.73
£5.73
Part number: EMH538
Please enter your vehicle information above to check this fits your vehicle!
Important compatibility info
| Inner diameter 2 | 20 mm |
| Inner diameter 1 | 28.5 mm |
| Hose Length | 355 mm |
| Material | NBR (nitrile butadiene rubber) |
| Colour | Black |
| Type | Hose, crankcase ventilation |
| Function | Hose, crankcase ventilation |
ONLY
£5.76
£5.76
Part number: MFL1109
Important compatibility info
| Colour | Black |
| Inner diameter 2 | 8 mm |
| Hose Length | 240 mm |
| Type | Fuel Hose |
| Function | Fuel Hose |
| Material | HNBR (hydrogenated nitrile butadiene rubber) |
| Inner diameter 1 | 8 mm |
| Placement on Vehicle | from fuel tank to fuel pump |
ONLY
£5.76
£5.76
Page 2 of 33
Hose & Pipe
