Proud to be a UK-based company
Contact usHose & Pipe
invoice Page 30 of 32
Results 871 - 900 of 947
Part number: MFL1009
Important compatibility info
| Function | Fuel Hose |
| Colour | Black |
| Material | NBR (nitrile butadiene rubber) |
| Type | Fuel Hose |
| Placement on Vehicle | Injection Pump to Fuel Filter |
ONLY
£64.99
£64.99
Part number: MFL1064
Important compatibility info
| Inner diameter 1 | 8 mm |
| Inner diameter 2 | 8 mm |
| Hose Length | 790 mm |
| Material | Plastic |
| Colour | Black |
| Function | Fuel Hose |
| Type | Fuel Hose |
| Placement on Vehicle | Between supply pump and fuel rail |
ONLY
£65.64
£65.64
Part number: EMH433
Important compatibility info
| Material | Plastic |
| Colour | Black |
| Type | Oil Separator, crankcase ventilation |
| Function | Oil Separator, crankcase ventilation |
ONLY
£66.85
£66.85
Part number: 30931
Important compatibility info
| Title | Servo Hose - 12.7mm ID - 10m |
Additional Information
- Burst Pressure 25 BAR
- 5 BAR Pressure
- 10m coil
ONLY
£66.86
£66.86
Part number: MFL1061
Important compatibility info
| Inner diameter 1 | 13 mm |
| Inner diameter 2 | 6 mm |
| Material | Plastic |
| Colour | Black |
| Function | Fuel Hose |
| Type | Fuel Hose |
| Hose Length | 1370 mm |
ONLY
£67.04
£67.04
Part number: EMH240
Important compatibility info
| Inner diameter 2 | 9.5 mm |
| Hose Length | 550 mm |
| Inner diameter 1 | 13 mm |
| Material | Rubber |
| Colour | Black |
| Type | Hose, crankcase ventilation |
| Function | Hose, crankcase ventilation |
ONLY
£67.11
£67.11
Part number: EMH089
Please enter your vehicle information above to check this fits your vehicle!
Important compatibility info
| Inner diameter 2 | 29 mm |
| Hose Length | 330 mm |
| Inner diameter 1 | 38 mm |
| Material | Plastic |
| Colour | Black |
| Type | Hose, crankcase ventilation |
| Function | Hose, crankcase ventilation |
| Placement on Vehicle | from cylinder head cover to oil separator |
ONLY
£68.10
£68.10
Part number: OK175MS
Important compatibility info
| Title | O Clip Kit M/S - Pack of 175 |
Additional Information
Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. Jubilee 'O' Clips are two ear clamps widely used for maintenance and OEM applications. Mainly used on air, fluid, gas and steam lines, they are also suitable for low pressure hydraulic applications. Ideal for where the requirement is for a neat finish with no bulky housing to catch on obstructions. Pincers are used to crimp the ears of the clamps and affect a proper seal. A 'O' clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time.
In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- Mild steel zinc plated
- 175 'O' clips in a re-usable plastic container
ONLY
£68.60
£68.60
Part number: 3230-12101
Important compatibility info
ONLY
£70.08
£70.08
Part number: 3225-00050
Important compatibility info
ONLY
£70.37
£70.37
Part number: EMH477
Important compatibility info
| Inner diameter 2 | 12 mm |
| Hose Length | 553 mm |
| Inner diameter 1 | 11.5 mm |
| Material | Plastic |
| Colour | Black |
| Function | Hose, crankcase ventilation |
| Type | Hose, crankcase ventilation |
ONLY
£71.07
£71.07
Part number: EMH650
Important compatibility info
| Hose Length | 550 mm |
| Function | Hose, crankcase ventilation |
| Type | Hose, crankcase ventilation |
| Inner diameter 2 | 10 mm |
| Colour | Black |
| Inner diameter 1 | 10 mm |
| Material | Plastic |
ONLY
£71.07
£71.07
Part number: MFL1065
Important compatibility info
| Hose Length | 1720 mm |
| Inner diameter 1 | 8 mm |
| Inner diameter 2 | 5 mm |
| Material | Plastic |
| Colour | Black |
| Function | Fuel Hose |
| Type | Fuel Hose |
| Placement on Vehicle | Between supply pump and fuel rail |
ONLY
£71.13
£71.13
Part number: 4281-17135
Important compatibility info
ONLY
£72.06
£72.06
Part number: 30932
Important compatibility info
| Title | Coolant/Heater Hose - 10.0mm ID - 20m |
Additional Information
- Temp -40C to + 100C
- 20m coil
- Coolant & Anti-Freeze Resistant
ONLY
£73.02
£73.02
Part number: EMH612
Important compatibility info
| Hose Length | 179 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Colour | Black |
| Function | Hose, crankcase ventilation |
| Type | Hose, crankcase ventilation |
| Inner diameter 2 | 15 mm |
| Inner diameter 1 | 17.5 mm |
ONLY
£73.05
£73.05
Part number: MFL1105
Important compatibility info
| Material | Plastic |
| Colour | Black |
| Function | Fuel Hose |
| Type | Fuel Hose |
ONLY
£73.05
£73.05
Part number: EMH228
Important compatibility info
| Material | Plastic |
| Colour | Black |
| Type | Oil Separator, crankcase ventilation |
| Function | Oil Separator, crankcase ventilation |
ONLY
£74.41
£74.41
Part number: 4324-10050
Important compatibility info
ONLY
£75.03
£75.03
Part number: 3230-12121
Important compatibility info
ONLY
£77.01
£77.01
Part number: 4171-20160
Important compatibility info
ONLY
£78.00
£78.00
Part number: JA165
Important compatibility info
| Title | Junior Clip M/S Assortment - Pack of 165 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- Contents include: 25 x NB0709, 25 x NB0810, 25 x NB0911, 30 x NB1012, 30 x NB1113 and 30 x NB1214
- Sizes range from 7mm to 14mm
- Suitable for connecting hoses in low pressure applications
- 165 piece junior clip set in a plastic re-usable container
ONLY
£78.65
£78.65
Part number: PHH01
Important compatibility info
| Title | Coolant/Heater Hose - 1/2in. ID - 20m |
Additional Information
Over time hoses and pipes deteriorate. To avoid drips and leaks you may need to replace these from time to time to ensure that you vehicle is running effectively and efficiently. Pearl Automotive provide a wide range of replacement parts and accessories to cater for a wide range of circumstances. As part of their repairs and replacements range Pearl have designed a range of hoses for a wide range of applications. This roll of heater hose from Pearl Automotive is 1/2 inch hose. It comes in a 20m roll made from a durable EPDM rubber which makes it suitable for use in most automotive engine heating and cooling systems. It has been specially designed to withstand high and low temperatures situations and is suitable for use in the following temperature range: -40C to 100C. Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.
- Easy to fit
- 20m Heater hose
- Made from EPDM rubber
- Suitable for automotive heating systems with a temperature range of -40C to + 110C
ONLY
£78.87
£78.87
Part number: EMH235
Important compatibility info
| Inner diameter 2 | 9.5 mm |
| Inner diameter 1 | 11 mm |
| Hose Length | 545 mm |
| Material | NBR (nitrile butadiene rubber) |
| Colour | Black |
| Type | Hose, crankcase ventilation |
| Function | Hose, crankcase ventilation |
ONLY
£78.99
£78.99
Part number: 187760
Important compatibility info
| Weight | 0.544 kg |
| Number of Connectors / Ports | 2 |
| for OE number | 6Q1 423 893 M |
| External Thread Size | M14 x 1,5 |
| Function | Hydraulic Hose, steering |
| Type | Hydraulic Hose, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£79.76
£79.76
Part number: 185667
Important compatibility info
| Number of Connectors / Ports | 2 |
| Weight | 0.875 kg |
| Type | Hydraulic Hose, steering |
| Function | Hydraulic Hose, steering |
| Inner diameter 1 | 14 mm |
| Inner diameter 2 | 16 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£80.47
£80.47
Part number: 47896
Important compatibility info
| Function | Hydraulic Hose, steering |
| Weight | 0.789 kg |
| Type | Hydraulic Hose, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£80.93
£80.93
Part number: BHC1005
Important compatibility info
| Width | 12 mm |
| Quantity | 10 |
| Diameter From | 70 mm |
| Diameter To | 90 mm |
| Function | Fastening Clamp, charge air hose |
| Type | Fastening Clamp, charge air hose |
ONLY
£81.86
£81.86
Part number: FHC1005
Important compatibility info
| Width | 12 mm |
| Quantity | 10 |
| Diameter From | 70 mm |
| Diameter To | 90 mm |
| Function | Fastening Clamp, charge air hose |
| Type | Fastening Clamp, charge air hose |
ONLY
£81.86
£81.86
Part number: 3230-12151
Important compatibility info
ONLY
£82.95
£82.95
Page 30 of 32
Hose & Pipe
