Proud to be a UK-based company
Contact usNuts & Washers
invoice Page 16 of 17
Results 151 - 160 of 165
Part number: 07190
Important compatibility info
| Spanner Size | 12 |
| Weight | 0.004 kg |
| Bolt Head/Nut Design | Male Hex |
| Function | Nut, exhaust manifold |
| Internal Thread Size | M8 x 1,25 |
| Type | Nut, exhaust manifold |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£4.26
£4.26
Part number: 38686
Important compatibility info
| Height | 15.8 mm |
| Weight | 0.005 kg |
| Material | Plastic |
| Bolt / Nut Version | Sheet Metal Nut |
| Type | Retaining Clip, bonnet noise insulation |
| Function | Retaining Clip, bonnet noise insulation |
| Outer diameter | 20.3 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£4.14
£4.14
Part number: PWN091
Important compatibility info
| Title | Manifold Nuts - 10mm - Pack Of 2 |
Additional Information
From time to times mall parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. As part of this range Wot-Nots have created a set of Self Locking nuts. The 2 piece pack comes in a M10 size with an inside diameter of 10mm. It is perfect for replacing manifold bolts. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- M10
- Heat resistant
- Nuts 10mm suitable for manifold
ONLY
£3.98
£3.98
Part number: PWN093
Important compatibility info
| Title | Spire Clips - No. 6 & 8 - Pack Of 3 Pairs |
Additional Information
From time to times mall parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. This Wot-Nots pack of 6 Spire Clips are used behind a flat piece of pre drilled metal which enables to fix another item to it , using a number 10 self-tapping screw. These fasteners are zinc plated. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Pack of 6
- Zinc plated
- This fastener is used behind a flat piece of pre drilled metal which enables to fix another item to it , using a number 10 self tapping screw
ONLY
£3.80
£3.80
Part number: PWN094
Important compatibility info
| Title | Spire Clips - No. 10 - Pack Of 4 |
Additional Information
From time to times mall parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. This Wot-Nots pack of 3 Spire Clips are used behind a flat piece of pre drilled metal which enables to fix another item to it , using a number 10 self-tapping screw. These fasteners are zinc plated. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Zinc plated
- Pack of 4
- This fastener is used behind a flat piece of pre drilled metal which enables to fix another item to it , using a number 10 self tapping screw
ONLY
£3.80
£3.80
Part number: PWN315
Important compatibility info
| Title | Self Locking Nuts - M6 x 1mm Pitch - Pack Of 4 |
Additional Information
From time to times mall parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. As part of this range Wot-Nots have created a set of Self Locking nuts. The 4 piece pack comes in a M6 size with an inside diameter of 6mm and a 1mm pitch. It is also supplied in a handy clear storage box. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Designed to be used only once in a pack of 4
- Features a nylon insert to ensure it does not shake loose
- Nuts self locking with a M6 inside diameter
ONLY
£3.80
£3.80
Part number: PWN316
Important compatibility info
| Title | Self Locking Nuts - M8 x 1.25mm Pitch - Pack Of 4 |
Additional Information
From time to times mall parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. As part of this range Wot-Nots have created a set of Self Locking nuts. The 4 piece pack comes in a M8 size with an inside diameter of 8mm and a 1.25mm pitch. It is also supplied in a handy clear storage box. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Designed to be used only once in a pack of 4
- Features a nylon insert to ensure it does not shake loose
- Nuts self locking with a M6 inside diameter
ONLY
£3.80
£3.80
Part number: PWN317
Important compatibility info
| Title | Self Locking Nuts - M10 x 1.5mm Pitch - Pack Of 3 |
Additional Information
From time to times mall parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. As part of this range Wot-Nots have created a set of Self Locking nuts. The 4 piece pack comes in a M10 size with an inside diameter of 10mm and a 1.5mm pitch. It is also supplied in a handy clear storage box. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Designed to be used only once in a pack of 4
- Features a nylon insert to ensure it does not shake loose
- Nuts self locking with a M6 inside diameter
ONLY
£3.80
£3.80
Part number: PWN059
Important compatibility info
| Title | Steel Washer - Flat - 1/4in. - Pack Of 20 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. This pack of 20 Steel Flat Washers from Wot-Nots are commonly used to stop nuts rubbing against the component your bolting up or used as a spacer. The 20 piece Steel Zinc plated washers come in 1/4”. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Steel construction
- Flat washer
ONLY
£3.76
£3.76
Part number: PWN060
Important compatibility info
| Title | Steel Washer - Flat - 5/16in. - Pack Of 20 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. This pack of 20 Steel Flat Washers from Wot-Nots are commonly used to stop nuts rubbing against the component your bolting up or used as a spacer. The 20 piece Steel Zinc plated washers come in 5/16”. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Steel construction
- Flat washer
ONLY
£3.76
£3.76
Page 16 of 17
Nuts & Washers
