Proud to be a UK-based company
Contact usNuts & Washers
invoice Page 4 of 34
Results 16 - 20 of 168
Part number: 39064
Important compatibility info
| Internal Thread Size | M10 x 1,5 |
| Weight | 0.006 kg |
| Thickness | 10.4 mm |
| Spanner Size | 14 |
| Surface | Copper coated |
| Function | Nut, exhaust manifold |
| Type | Nut, exhaust manifold |
| Material | Steel |
| Bolt Head/Nut Design | Male Hex |
| Quality/ Grade | 8 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£4.27
£4.27
Part number: 38687
Important compatibility info
| Weight | 0.0052 kg |
| Material | Spring Steel |
| Bolt / Nut Version | Sheet Metal Nut |
| Function | Retaining Clip, bonnet noise insulation |
| Type | Retaining Clip, bonnet noise insulation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£4.36
£4.36
Part number: 38838
Important compatibility info
| Length | 19 mm |
| Width | 5 mm |
| Thickness | 16 mm |
| Function | Retaining Clip, bonnet noise insulation |
| Weight | 0.05 kg |
| Type | Retaining Clip, bonnet noise insulation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£4.42
£4.42
Part number: PWN824
Important compatibility info
| Title | Nuts - Stainless Steel - M6 |
Additional Information
From time to times mall parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. As part of this range Wot-Nots have created a set of stainless steel nuts. The 8 piece pack comes in a M6 size with an inside diameter of 6mm. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Non Marine Use
- Stainless Steel
- Grade A2
- M6
- Nuts
ONLY
£4.55
£4.55
Page 4 of 34
Nuts & Washers
