Proud to be a UK-based company
Contact usThreaded Fasteners
invoice Page 9 of 12
Results 81 - 90 of 118
Part number: PWN1012
Important compatibility info
| Title | Washers Flat Repair Type 10mm x 38mm |
Additional Information
- Non Marine Use
- Stainless Steel
- Grade A2
- 10x38mm
- Repair Washer
ONLY
£4.91
£4.91
Part number: 02141
Important compatibility info
| Surface | Zinc-coated |
| Bolt Head/Nut Design | Male Hex |
| Quality/ Grade | 10.9 |
| Bolt / Nut Version | Tensilock |
| Function | Screw |
| Length | 40 mm |
| External Thread Size | M14 x 1,5 |
| Weight | 0.07 kg |
| Type | Screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£4.85
£4.85
Part number: 2914552155
Important compatibility info
| Function | Screw |
| Type | Screw |
| Replaced by | 2914558155 |
ONLY
£4.75
£4.75
Part number: 24362
Important compatibility info
| Surface | Zink flake coated |
| External Thread Size | M10 x 1,5 |
| Weight | 0.030 kg |
| Length | 39 mm |
| Outer diameter | 20 mm |
| Spanner Size | 13 |
| Bolt Head/Nut Design | Male Hex |
| Quality/ Grade | 10.9 |
| Function | Screw |
| Screw length below head | 30 mm |
| Type | Screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£4.63
£4.63
Part number: PWN1297
Important compatibility info
| Title | Threaded Bar M8 x 300mm |
Additional Information
Threaded Bar M8 x 300mm inc. Nuts and Washers
- 300mm Length
- Can Be Cut To Desired Stud Size
- PWN1297
ONLY
£4.58
£4.58
Part number: PWN675
Important compatibility info
| Title | Set Screw & Nut - M14 x 75mm |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. This Set Screw and Nut from Wot-Nots are commonly known as a bolt it is completely threaded with a 1.5 pitch, and has the benefits of being high tensile to withstand high torque settings. The zinc plated screws are M14 and boast a fine thread 75mm long. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Supplied with matching nut
- Benefits of being high tensile to withstand high torque settings
- Commonly known as a bolt this product is completely threaded with a 1.5 pitch
ONLY
£4.50
£4.50
Part number: PWN552
Important compatibility info
| Title | Set Screw & Nut - M10 x 80mm |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. This Set Screw and Nut from Wot-Nots are commonly known as a bolt it is completely threaded with a 1.5 pitch, and has the benefits of being high tensile to withstand high torque settings. The zinc plated screws are M10 and boast a fine thread 80mm long. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Supplied with matching nut
- Benefits of being high tensile to withstand high torque settings
- Commonly known as a bolt this product is completely threaded with a 1.5 pitch
ONLY
£4.12
£4.12
Part number: PWN556
Important compatibility info
| Title | Screw Socket Cap - M8 x 25 - Pack of 3 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. This Screw Socket Cap from Wot-Nots is M8 x 25 and comes in a pack of 5. A socket cap screws has a raised head with an internal torx female key. This is a high tensile 8.8 grade socket cap screw. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Grade 8.8
- High Tensile
- Socket cap screws have a raised head with an internal torx female key
ONLY
£4.10
£4.10
Part number: PWN034
Important compatibility info
| Title | Set Screw & Nut - M10 x 40mm - Pack of 2 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. This pack of 2 Set Screws and Nuts from Wot-Nots are commonly known as a bolt it is completely threaded with a 1.5 pitch, and has the benefits of being high tensile to withstand high torque settings. The zinc plated screws are M10 and boast a fine thread 40mm long. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- 8.8 High Tensile
- Zinc plated
- Benefits of being high tensile to withstand high torque settings
- Commonly known as a bolt this product is completely threaded with a 1.5 pitch
ONLY
£3.99
£3.99
Part number: PWN554
Important compatibility info
| Title | Screw Socket Cap - M6 x 20 - Pack of 5 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. This Screw Socket Cap from Wot-Nots is M6 x 20 and comes in a pack of 5. A socket cap screws has a raised head with an internal torx female key. This is a high tensile 8.8 grade socket cap screw. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Grade 8.8
- High Tensile
- Socket cap screws have a raised head with an internal torx female key
ONLY
£3.99
£3.99
Page 9 of 12
Threaded Fasteners
