Proud to be a UK-based company
Contact us
Important compatibility info
| Additional Information 2 | with retaining strap |
| Length | 83 mm |
| Height | 77 mm |
| Width | 90 mm |
| Voltage | 12 V |
| Frequency Range | 495 Hz |
| Signal | High Tone |
| Noise Level | 110 dB |
| Weight | 0.20 kg |
| Type | Trumpet Horn |
| Function | Trumpet Horn |
| Power Consumption | 80 W |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.69
Important compatibility info
| Weight | 0.735 kg |
| Outer diameter | 96 mm |
| Filter type | Spin-on Filter |
| Function | Fuel filter |
| Internal Thread Size | M20 x 1,5 |
| Type | Fuel filter |
| Height | 184 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.69
Important compatibility info
| Function | Switch Unit, ignition system |
| Weight | 0.147 kg |
| Type | Switch Unit, ignition system |
| Number of mounting bores | 2 |
| Number of Connectors / Ports | 7 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.69
Important compatibility info
| Inner diameter 1 | 27 mm |
| Function | Bellow Kit, drive shaft |
| Weight | 0.19 kg |
| Length | 107 mm |
| Material | Thermoplast |
| Type | Bellow Kit, drive shaft |
| Inner diameter 2 | 88 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (44152)
- 1x Febi Circlip (24035)
- 1x Febi Circlip (02066)
- 1x Febi Clamping Clip (38757)
- 1x Febi Clamping Clip (45644)
- 1x Febi High Temperature Lubricant (03630)
- 1x Febi Packing Plate, drive shaft flange (47594)
£15.69
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 61.7 mm |
| Width | 56.5 mm |
| Wear Warning Contact | excl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 15 mm |
| Function | Brake Pad Set, disc brake |
| Weight | 0.542 kg |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.69
Important compatibility info
| Length | 435 mm |
| Height | 44 mm |
| Width | 110 mm |
| Filter type | Pollen Filter |
| Weight | 0.24 kg |
| Type | Filter, cabin air |
| Function | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.69
Important compatibility info
| Height | 139 mm |
| Outer diameter | 96 mm |
| Filter type | Spin-on Filter |
| Function | Fuel filter |
| Housing material | Metal |
| Internal Thread Size | M24 x 1,5 |
| Type | Fuel filter |
| Weight | 0.62 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.69
Important compatibility info
| Weight | 1.0 kg |
| Placement on Vehicle | Front Axle |
| Length | 114.9 mm |
| Width | 54.8 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 16.2 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.69
Important compatibility info
| Weight | 0.315 kg |
| Placement on Vehicle | Front Axle, Upper |
| Function | Spring Seat |
| Type | Spring Seat |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.70
Important compatibility info
| Weight | 0.560 kg |
| Height | 143 mm |
| Outer diameter | 94 mm |
| Filter type | Spin-on Filter |
| Function | Fuel filter |
| Internal Thread Size | 1" - 14 UNS |
| Type | Fuel filter |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.70
Important compatibility info
| Weight | 0.06 kg |
| Placement on Vehicle | Rear Axle |
| Material | Rubber |
| Inner diameter | 15 mm |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.70
Important compatibility info
| Opening Temperature | 80 °C |
| Weight | 0.14 kg |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Thermostat, coolant (09677)
- 1x Febi Seal, thermostat (10258)
£15.71
Important compatibility info
| Weight | 0.47 kg |
| Additional Information | with nuts |
| External Thread Size | M12 x 1,75 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 256 mm |
| Material | Steel |
| Outer diameter | 10 mm |
| Spanner Size | 18 |
| Rod/Strut | Coupling Rod |
| Thread Length | 27 mm |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.71
Important compatibility info
| Weight | 0.04 kg |
| Length | 60 mm |
| Spanner Size | 19 |
| Colour | Black |
| Number of Connectors / Ports | 2 |
| Type | Sensor, coolant temperature |
| Function | Sensor, coolant temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.71
Important compatibility info
| Weight | 0.176 kg |
| Length | 1725 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 6 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.71
Important compatibility info
| Weight | 0.3 kg |
| Width | 20 mm |
| Material | Metal |
| Outer diameter | 72 mm |
| Inner diameter | 10 mm |
| Function | Tensioner Pulley, timing belt |
| Type | Tensioner Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.71
Important compatibility info
| Function | Dust Cover Kit, shock absorber |
| Type | Dust Cover Kit, shock absorber |
| Weight | 0.242 kg |
| Width | 56 mm |
| Length | 176 mm |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Protective Cap/Bellow, shock absorber (22142)
- 2x Febi Rubber Buffer, suspension (23588)
£15.71
Important compatibility info
| Weight | 0.266 kg |
| Joint Type | Tripod Joint |
| Placement on Vehicle | Front Axle, transmission sided |
| Length | 94 mm |
| Material | Rubber |
| Inner diameter 1 | 94 mm |
| Inner diameter 2 | 28 mm |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (171729)
- 1x Febi High Temperature Lubricant (03630)
£15.71
Important compatibility info
| Additional Information | with counter nut |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 241 mm |
| Weight | 0.521 kg |
| Function | Inner Tie Rod |
| External Thread Size | M16 x 1,5, M14 x 1,5 |
| Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.71
Important compatibility info
| Function | Dust Cover Kit, shock absorber |
| Type | Dust Cover Kit, shock absorber |
| for OE number | 33 53 6 767 335 S1 |
| Weight | 0.2 kg |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.71
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023