Proud to be a UK-based company
Contact us
Important compatibility info
| Width | 204 mm |
| Filter type | Filter Insert |
| Weight | 0.367 kg |
| Function | Air Filter |
| Height | 44 mm |
| Length | 307 mm |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.74
Important compatibility info
| Length | 56 mm |
| Material | Rubber/Metal |
| Outer diameter | 52 mm |
| Inner diameter | 16 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Weight | 0.168 kg |
| Function | Bushing, axle beam |
| Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.74
Important compatibility info
| Height | 88 mm |
| Outer diameter | 76 mm |
| Additional Information 2 | with seal ring |
| Weight | 0.095 kg |
| Bolt Head/Nut Design | Male Hex |
| Tightening Torque | 25 Nm |
| Type | Cap, oil filter housing |
| Function | Cap, oil filter housing |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.74
Important compatibility info
| Weight | 0.59 kg |
| Placement on Vehicle | Rear Axle, Front Axle |
| Function | Repair Kit, brake caliper |
| Type | Repair Kit, brake caliper |
| for OE number | 50 01 860 792 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.74
Important compatibility info
| Weight | 0.240 kg |
| Length | 274 mm |
| Pipe Diameter | 9 mm |
| Type | Fuel filter |
| Function | Fuel filter |
| Height | 274 mm |
| Width | 55 mm |
| Outer diameter | 55 mm |
| Filter type | In-Line Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.74
Important compatibility info
| Paired article numbers | 183509 |
| Weight | 0.448 kg |
| Type | Tie Rod End |
| Function | Tie Rod End |
| Length | 128 mm |
| External Thread Size | M12 x 1,75 |
| Spanner Size | 21 |
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with nut |
| Internal Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.74
Important compatibility info
| Inner diameter | 44 mm |
| Additional Information 2 | with seal ring |
| Outer diameter | 98 mm |
| Weight | 0.280 kg |
| Height | 253 mm |
| Filter type | Filter Insert |
| Function | Oil Filter |
| Type | Oil Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.74
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 310 mm |
| Housing Diameter | 18 mm |
| Eject Force | 330 N |
| Stroke | 120 mm |
| Mounting points diameter | 16.5 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, bonnet |
| Housing length | 172 mm |
| Weight | 0.150 kg |
| Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.74
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 305 mm |
| Housing Diameter | 15 mm |
| Eject Force | 130 N |
| Stroke | 111 mm |
| Piston conrod diameter | 6 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 167 mm |
| Weight | 0.128 kg |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.74
Important compatibility info
| Inner diameter | 150 mm |
| Number of Teeth, ABS ring | 100 |
| Function | Sensor Ring, ABS |
| Material | Steel |
| Outer diameter | 180 mm |
| Placement on Vehicle | Rear Axle |
| Height | 19.5 mm |
| Weight | 0.21 kg |
| Type | Sensor Ring, ABS |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.74
Important compatibility info
| Weight | 0.014 kg |
| Type | Sensor, camshaft position |
| Function | Sensor, camshaft position |
| Outer diameter | 16 mm |
| Number of Connectors / Ports | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.74
Important compatibility info
| Weight | 0.22 kg |
| Placement on Vehicle | Front Axle, Wheel Side |
| Length | 114 mm |
| Material | Thermoplast |
| Inner diameter 1 | 26 mm |
| Inner diameter 2 | 81 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (29962)
- 1x Febi Clamping Clip (38757)
- 1x Febi Clamping Clip (45643)
- 1x Febi Molybdenum Grease (02582)
£15.74
Important compatibility info
| Weight | 0.060 kg |
| Length | 100 mm |
| Material | Thermoplast |
| Inner diameter 1 | 27 mm |
| Inner diameter 2 | 78 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (102061)
- 1x Febi Clamping Clip (27100)
- 1x Febi Clamping Clip (45642)
- 1x Febi High Temperature Lubricant (03630)
£15.74
Important compatibility info
| Width | 52.5 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17.8 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Placement on Vehicle | Front Axle |
| Length | 131.6 mm |
| Weight | 1.280 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.74
Important compatibility info
| Material | Rubber/Metal |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, manual transmission |
| Weight | 0.307 kg |
| Type | Mounting, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.74
Important compatibility info
| Material | Metal |
| Outer diameter | 123 mm |
| Thickness | 21.5 mm |
| Inner diameter | 85 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Weight | 0.22 kg |
| Function | Rolling Bearing, suspension strut support mount |
| Type | Rolling Bearing, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.74
Important compatibility info
| Function | Inner Tie Rod |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| External Thread Size | M14 x 1,5, M16 x 1,5 |
| Weight | 0.632 kg |
| Length | 237 mm |
| Extra Description | ProKit |
| Additional Information | with counter nut |
| Type | Inner Tie Rod |
| Replaces | 178519 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.74
Important compatibility info
| Additional Information | with counter nut |
| Internal Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 226 mm |
| Function | Inner Tie Rod |
| Weight | 0.427 kg |
| External Thread Size | M12 x 1,25 |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.74
Important compatibility info
| Outer diameter | 46 mm |
| Opening Temperature | 91 °C |
| Function | Thermostat, coolant |
| Weight | 0.09 kg |
| Seal Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Additional Information | with gasket/seal |
| Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.74
Important compatibility info
| Function | Wheel Bearing Kit |
| Inner diameter | 25 mm |
| Width | 42 mm |
| Bearing Type | Angular Ball Bearing |
| Outer diameter | 52 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Weight | 0.48 kg |
| Type | Wheel Bearing Kit |
| Additional Information 2 | with retaining ring |
| Dust Cover | with dust cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.74
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023