Important compatibility info
Material | FPM (fluoride rubber), PTFE (polytetrafluoroethylene) |
Function | Repair Kit, air compressor |
Type | Repair Kit, air compressor |
Weight | 0.035 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.050 kg |
Notches / Holes Number | 1 |
Function | Exhaust Valve |
Valve head diameter | 29.9 mm |
Length | 106.7 mm |
Valve stem diameter | 6 mm |
Type | Exhaust Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Bolt Head/Nut Design | Male Hex |
Weight | 0.64 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Tie Rod End |
Cone Size | 18 mm |
Internal Thread Size | M14 x 1,5 |
Extra Description | ProKit |
External Thread Size | M12 x 1,5 |
Type | Tie Rod End |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.294 kg |
Placement on Vehicle | Wheel Side, Front Axle |
Length | 140 mm |
Material | Thermoplast |
Inner diameter 1 | 27 mm |
Inner diameter 2 | 88 mm |
Function | Bellow Kit, drive shaft |
Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (100039)
- 1x Febi Clamping Clip (29200)
- 1x Febi Clamping Clip (45644)
- 2x Febi Molybdenum Grease (02582)
Important compatibility info
Weight | 0.292 kg |
Length | 125 mm |
Material | Thermoplast |
Inner diameter 2 | 90 mm |
Function | Bellow Kit, drive shaft |
Type | Bellow Kit, drive shaft |
Inner diameter 1 | 28 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Clamping Clip (29200)
- 1x Febi Clamping Clip (45644)
- 2x Febi Molybdenum Grease (02582)
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information | with bush |
Number of Connectors / Ports | 2 |
Weight | 0.07 kg |
Cable Length | 435 mm |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Plastic |
Outer diameter | 67 mm |
Inner diameter | 17 mm |
Number of Ribs | 6 |
Mounting points diameter | 17 mm |
Function | Deflection/Guide Pulley, v-ribbed belt |
Weight | 0.150 kg |
Width of castor bearing surface | 25 mm |
Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Plastic |
Weight | 0.024 kg |
Opening Pressure | 1.08 bar |
Type | Cap, coolant tank |
Function | Cap, coolant tank |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Coolant Control Valve |
Weight | 0.101 kg |
Function | Coolant Control Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Bearing Type | Tapered Roller Bearing |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Weight | 0.42 kg |
Function | Wheel Bearing Kit |
Width 2 | 15.5 mm |
Outer diameter 2 | 45 mm |
Width 1 | 17.5 mm |
Outer diameter 1 | 68 mm |
Inner diameter 2 | 19 mm |
Inner diameter 1 | 41 mm |
Additional Information 2 | with shaft seal |
Type | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Shaft Seal, wheel bearing (06840)
- 1x Febi Nut, kingpin (02229)
Important compatibility info
Weight | 0.315 kg |
Number of Connectors / Ports | 2 |
Function | Expansion Tank, coolant |
Type | Expansion Tank, coolant |
Additional Information 2 | without lid |
for OE number | 1J0 121 403 B |
Additional Information | with coolant level sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.154 kg |
Number of Ribs | 7 |
Function | V-Ribbed Belt |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Length | 1290 mm |
Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.341 kg |
Height | 110 mm. 157 mm |
Outer diameter | 80 mm |
Number of Connectors / Ports | 2 |
Function | Fuel filter |
Filter type | In-Line Filter, with water separator |
Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.070 kg |
Placement on Vehicle | Right |
Material | Rubber |
Type | Gasket, cylinder head cover |
Function | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Plastic |
Voltage | 12 V |
Colour | Black |
Number of Connectors / Ports | 8 |
Combi Switch Function | with wipe-wash function, with rear wipe-wash function, with wipe interval function |
Function | Steering Column Switch |
Weight | 0.2 kg |
Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.250 kg |
External Thread Size | M14 x 1,5 |
Internal Thread Size | M14 x 1,5 |
Length | 185 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information | with counter nut |
Function | Inner Tie Rod |
Extra Description | ProKit |
Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Plastic |
Colour | red/brown |
Function | Hazard Warning Light Switch |
Number of Connectors / Ports | 4 |
Weight | 0.1 kg |
Housing Colour | Black |
Extra Description | febi Plus |
Type | Hazard Warning Light Switch |
Control Type | Button Actuation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Width | 18.5 mm |
Outer diameter | 65.3 mm. 50 mm |
Inner diameter | 35 mm. 21.5 mm |
Bearing Type | Tapered Roller Bearing |
Function | Wheel Bearing Kit |
Weight | 0.58 kg |
Type | Wheel Bearing Kit |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Shaft Seal, wheel bearing (08931)
- 1x Febi Screw (08953)
- 1x Febi Cap, wheel bearing (08929)
- 1x Febi Tab Washer, axle nut (08952)
Important compatibility info
Weight | 0.816 kg |
Placement on Vehicle | Front Axle Right, Lower |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 02672 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | both sides |
Length | 296 mm |
Housing Diameter | 19 mm |
Eject Force | 480 N |
Stroke | 81 mm |
Mounting points diameter | 18 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, boot/cargo area |
Housing length | 192 mm |
Type | Gas Spring, boot/cargo area |
Weight | 0.125 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023