Important compatibility info
External Thread Size | M24 x 1,5, M16 x 1,5 |
Placement on Vehicle | Front Axle Right |
Length | 95 mm |
Thread Type | with right-hand thread |
Cone Size | 20 mm |
Function | Tie Rod End |
Weight | 0.708 kg |
Additional Information | with counter nut |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (12975)
- 1x Febi Nut (01033)
Important compatibility info
Weight | 0.220 kg |
Placement on Vehicle | Front Axle |
Material | Rubber, Rubber with fabric lining |
Function | Mounting Kit, stabiliser bar |
Type | Mounting Kit, stabiliser bar |
Inner diameter 2 | 24 mm |
Inner diameter 1 | 18 mm |
Internal Thread Size | M8 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Mounting, stabiliser bar (14942)
- 2x Febi Mounting, stabiliser bar (15525)
- 8x Febi Nut (08565)
- 8x Febi Washer (08567)
Important compatibility info
Width | 51.2 mm |
Wear Warning Contact | excl. wear warning contact |
Placement on Vehicle | Rear Axle |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 15.2 mm |
Function | Brake Pad Set, disc brake |
Length | 94.8 mm |
Type | Brake Pad Set, disc brake |
Weight | 1.149 kg |
Additional Information 2 | with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.183 kg |
Joint Type | Tripod Joint |
Placement on Vehicle | Front Axle, transmission sided |
Length | 102 mm |
Material | Thermoplast |
Inner diameter 1 | 24 mm |
Inner diameter 2 | 68 mm |
Type | Bellow Kit, drive shaft |
Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (173235)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Function | Fuel filter |
Pipe Diameter | 10 mm |
Weight | 0.427 kg |
Length | 221 mm |
Outer diameter | 95 mm |
Filter type | In-Line Filter, with water separator |
Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 263 mm |
Height | 39.5 mm |
Width | 235 mm |
Filter type | Filter Insert |
Function | Air filter kit |
Weight | 0.50 kg |
Type | Air filter kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Interior Door Panel, Driver side |
Colour | Black |
Number of Connectors / Ports | 8 |
Weight | 0.02 kg |
Function | Switch, exterior mirror adjustment |
Extra Description | febi Plus |
Type | Switch, exterior mirror adjustment |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.584 kg |
Outer diameter | 86 mm |
Width | 96 mm |
Material | Rubber/Metal |
Length | 175 mm |
Thickness | 44 mm |
Inner diameter | 38 mm |
Placement on Vehicle | Front Axle, Rear Axle |
Function | Mounting, stabiliser bar |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Brake Pad Set, disc brake |
Weight | 0.670 kg |
Placement on Vehicle | Rear Axle |
Length | 85.3 mm |
Width | 46.5 mm |
Type | Brake Pad Set, disc brake |
Thickness/Strength 1 | 14 mm |
Inspection Tag | ECE R90 Approved |
Wear Warning Contact | with acoustic wear warning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.045 kg |
Placement on Vehicle | Rear Axle Right |
Paired article numbers | 106762 |
Number of Connectors / Ports | 2 |
Cable Length | 766 mm |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.432 kg |
External Thread Size | M10 x 1,5 |
Diameter | 1 mm |
Function | Link/Coupling Rod, stabiliser bar |
Thread Length | 28 mm |
Rod/Strut | Coupling Rod |
Thickness | 55 mm |
Outer diameter | 9 mm |
Material | Steel |
Length | 264 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Operating Mode | Hydraulic |
Function | Tensioner, timing chain |
Length | 60 mm |
Weight | 0.210 kg |
Type | Tensioner, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thickness | 62 mm |
Outer diameter | 128.5 mm |
Function | Cap, wheel bearing |
Spanner Size | 115 |
Weight | 0.470 kg |
External Thread Size | M115 x 2 |
Internal Thread Size | M30 x 2 |
Type | Cap, wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front, Front Axle Right |
Material | Rubber/Metal |
Outer diameter | 32.5 mm |
Thickness | 145 mm |
Weight | 0.333 kg |
Type | Mounting, control/trailing arm |
Function | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 168 mm |
Function | Filter, cabin air |
Length | 320 mm |
Height | 49 mm |
Filter type | Pollen Filter, Air Recirculation Filter |
Weight | 0.290 kg |
Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.32 kg |
Function | Mounting, engine |
Bearing/Mounting Type | Rubber-Metal Mount |
Material | Rubber/Metal |
Placement on Vehicle | Rear |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Seal Kit, multi-valve |
Type | Seal Kit, multi-valve |
Weight | 0.118 kg |
Additional Information 2 | without spacer plate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Cylinder Head Gasket, air compressor (35700)
- 1x Febi Seal Kit, multi-valve (35702)
- 1x Febi Seal, air compressor (35703)
- 1x Febi Seal Kit, multi-valve (35704)
- 1x Febi Seal, air compressor (35731)
- 1x Febi Seal, air compressor (35708)
- 1x Febi Seal, air compressor (35709)
- 1x Febi Seal Kit, multi-valve (35710)
- 1x Febi Seal Kit, multi-valve (35711)
- 1x Febi Seal, air compressor (35796)
- 1x Febi Seal, air compressor (35798)
Important compatibility info
Weight | 0.242 kg |
Height | 55 mm |
Outer diameter | 59 mm |
Inner diameter | 17 mm |
Function | Bush, spring eye |
Type | Bush, spring eye |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M12 x 1,75 |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
Weight | 0.641 kg |
Placement on Vehicle | Front Axle Left |
Rod/Strut | Coupling Rod |
Paired article numbers | 179468 |
Spanner Size | 18 |
Material | Steel |
Diameter | 1 mm |
Length | 280 mm |
Thread Length | 30 mm |
Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Metal, Plastic |
Weight | 0.137 kg |
Type | Oil Separator, crankcase ventilation |
Function | Oil Separator, crankcase ventilation |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023