Important compatibility info
Additional Information | with counter nut |
Additional Information 2 | with clamps |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 311 mm |
Function | Inner Tie Rod |
Extra Description | ProKit |
External Thread Size | M16 x 1,5 |
Type | Inner Tie Rod |
Weight | 0.7265 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (43793)
- 1x Febi Nut (38938)
- 1x Febi Clamping Clip (38755)
- 1x Febi Clamping Clip (38763)
Important compatibility info
Function | Screw Plug, oil sump |
Screw length below head | 21 mm |
Surface | Zinc-coated |
Material | Steel |
Length | 31 mm |
External Thread Size | M18 x 1,5 |
Bolt Head/Nut Design | Male Hex |
Spanner Size | 13 |
Type | Screw Plug, oil sump |
Additional Information 2 | without seal ring |
Thread Length | 14.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 3 |
Type | Sensor, crankshaft pulse |
Function | Sensor, crankshaft pulse |
Weight | 0.03 kg |
Additional Information 2 | with seal ring |
for OE number | 12 47 134 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.230 kg |
Material | Rubber/Metal |
Outer diameter | 84 mm |
Thickness | 53 mm |
Inner diameter | 16 mm |
Type | Bushing, axle beam |
Function | Bushing, axle beam |
Placement on Vehicle | Rear Axle Left, Front, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Brake caliper piston diameter | 41 mm |
Type | Brake Caliper |
Placement on Vehicle | Rear Axle Left |
Material | Cast Aluminium |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 178741 |
Weight | 1.76 kg |
Function | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle, Front Axle |
Weight | 0.041 kg |
Type | Accessory Kit, disc brake pad |
Function | Accessory Kit, disc brake pad |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Ribs | 6 |
Weight | 0.49 kg |
Additional Information 2 | with lid |
Outer diameter | 59 mm |
Function | Alternator Freewheel Clutch |
Inner diameter | 14 mm |
Type | Alternator Freewheel Clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.032 kg |
Type | Pedal Pad, brake pedal |
Function | Pedal Pad, brake pedal |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Wheel Bearing Kit |
Weight | 4.494 kg |
Bearing Type | Angular Ball Bearing |
Type | Wheel Bearing Kit |
Placement on Vehicle | Rear Axle |
Outer diameter | 91 mm |
Additional Information 2 | Wheel Bearing integrated into wheel hub, with ABS sensor ring |
Sealing lip material | NBR (nitrile butadiene rubber) |
Inner diameter | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.034 kg |
Number of Connectors / Ports | 2 |
Function | Sensor, crankshaft pulse |
Type | Sensor, crankshaft pulse |
Additional Information 2 | with seal ring |
for OE number | 46798345 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.194 kg |
Length | 1900 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Function | V-Ribbed Belt |
Number of Ribs | 6 |
Type | V-Ribbed Belt |
Replaces | 28990 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | transmission sided, Front Axle |
Material | Thermoplast |
Weight | 0.164 kg |
Length | 93 mm |
Function | Bellow Kit, drive shaft |
Type | Bellow Kit, drive shaft |
Inner diameter 1 | 28 mm |
Inner diameter 2 | 92 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (49878)
- 1x Febi Clamping Clip (29200)
- 1x Febi Clamping Clip (45645)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Type | Brake Caliper |
Placement on Vehicle | Rear Axle Right |
Material | Cast Aluminium |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 178740 |
Weight | 1.76 kg |
Function | Brake Caliper |
Brake caliper piston diameter | 41 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 2 |
Placement on Vehicle | Rear Axle Left |
Paired article numbers | 185613 |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Weight | 0.07 kg |
Cable Length | 1225 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Lower, Front Axle Left |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 39352 |
Function | Control/Trailing Arm, wheel suspension |
Weight | 4.0 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts, with holder |
Additional Information 2 | with ball joint |
Additional Information
Technical Information
After mounting the screw of the back-end control arm bush has to be tightened with 55 Nm + 90° + 15°
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (36595)
Important compatibility info
Weight | 0.045 kg |
Material | Plastic |
Opening Pressure | 1.4 bar |
Function | Cap, coolant tank |
for OE number | 13 05 248 |
Type | Cap, coolant tank |
Colour | Black |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Right |
Material | Rubber/Metal |
Inner diameter | 10 mm |
Paired article numbers | 109328 |
Type | Suspension Strut Support Mount |
Function | Suspension Strut Support Mount |
Weight | 0.440 kg |
Additional Information 2 | without ball bearing |
Hole Spacing | 144 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with adjuster |
Weight | 0.296 kg |
for OE number | 13513995 |
Type | Tailgate Lock |
Function | Tailgate Lock |
Extra Description | febi Plus |
Number of Connectors / Ports | 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.159 kg |
Function | Lock Cylinder, ignition lock |
Type | Lock Cylinder, ignition lock |
Lock System | with two keys |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.005 kg |
Length | 14 mm |
Outer diameter | 14 mm |
Inner diameter | 12 mm |
Function | Bush, starter shaft |
Type | Bush, starter shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023