Proud to be a UK-based company
Contact us
Important compatibility info
| Function | Hydraulic Filter Kit, automatic transmission |
| Length | 235 mm |
| Height | 49 mm |
| Width | 156 mm |
| Additional Information 2 | with oil sump gasket |
| Weight | 0.452 kg |
| Type | Hydraulic Filter Kit, automatic transmission |
| Seal Material | NBR (nitrile butadiene rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.72
Important compatibility info
| Weight | 0.07 kg |
| Width | 21 mm |
| Number of Teeth | 81 |
| Function | Timing Belt |
| Type | Timing Belt |
| Belts | with trapezoidal tooth profile |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.72
Important compatibility info
| Weight | 0.080 kg |
| Placement on Vehicle | Left |
| Material | NBR (nitrile butadiene rubber) |
| Function | Gasket, cylinder head cover |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.72
Important compatibility info
| Weight | 0.273 kg |
| Placement on Vehicle | both sides |
| Length | 453 mm |
| Housing Diameter | 19 mm |
| Eject Force | 550 N |
| Stroke | 173 mm |
| Mounting points diameter | 16.5 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 253.5 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.72
Important compatibility info
| Weight | 0.321 kg |
| Placement on Vehicle | both sides |
| Length | 537 mm |
| Housing Diameter | 19 mm |
| Eject Force | 585 N |
| Stroke | 208 mm |
| Mounting points diameter | 17.8 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 289 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.72
Important compatibility info
| Cooling Hose | from radiator to water pipe |
| Function | Radiator Hose |
| Type | Radiator Hose |
| Weight | 0.6 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.72
Important compatibility info
| Weight | 0.8 kg |
| Placement on Vehicle | Front Axle Right, Lower |
| Paired article numbers | 28700 |
| Function | Ball Joint |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Extra Description | ProKit |
| Internal Thread Size | M12 x 1,25 |
| External Thread Size | M14 x 1,5, M12 x 1,25 |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.72
Important compatibility info
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Placement on Vehicle | both sides |
| Length | 250 mm |
| Housing Diameter | 19 mm |
| Eject Force | 660 N |
| Stroke | 78 mm |
| Housing length | 146.5 mm |
| Function | Gas Spring, bonnet |
| Type | Gas Spring, bonnet |
| Weight | 0.168 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.72
Important compatibility info
| Weight | 0.207 kg |
| Placement on Vehicle | both sides |
| Length | 349 mm |
| Housing Diameter | 18 mm |
| Eject Force | 320 N |
| Stroke | 101 mm |
| Mounting points diameter | 15 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 221.5 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.72
Important compatibility info
| Inner diameter 1 | 31 mm |
| Outer diameter | 39 mm |
| Inner diameter | 31 mm |
| Outer diameter 1 | 39 mm |
| Cooling Hose | from engine to engine cooler |
| Function | Radiator Hose |
| Placement on Vehicle | Lower Left |
| Type | Radiator Hose |
| Weight | 0.414 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.72
Important compatibility info
| Weight | 0.620 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 37 mm |
| Outer diameter | 75 mm |
| Inner diameter | 42 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Additional Information 2 | with retaining ring |
| for OE number | 33 41 6 762 317 S1 |
| Additional Information | with axle nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Axle Nut, drive shaft (01701)
- 1x Febi Wheel Bearing (26309)
- 1x Febi Circlip (04015)
£17.72
Important compatibility info
| Filter type | Filter Insert |
| Function | Air filter kit |
| Height | 34 mm |
| Width | 194 mm |
| Length | 273 mm |
| Type | Air filter kit |
| Weight | 0.291 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.72
Important compatibility info
| Type | Bushing, axle beam |
| Inner diameter | 22 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Material | Rubber/Metal |
| Outer diameter | 84 mm |
| Thickness | 71 mm |
| Weight | 0.468 kg |
| Function | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.72
Important compatibility info
| Weight | 0.428 kg |
| for OE number | 82 00 042 037 |
| Function | Sprocket, crankshaft |
| Type | Sprocket, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.73
Important compatibility info
| Additional Information | with axle nut |
| Function | Wheel Bearing Kit |
| Inner diameter | 39 mm |
| Outer diameter | 74 mm |
| Width | 39 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Weight | 0.79 kg |
| Additional Information 2 | with integrated magnetic sensor ring, with retaining ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Circlip (04015)
- 1x Febi Nut, kingpin (22953)
£17.73
Important compatibility info
| Function | V-Ribbed Belt |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 6 |
| Type | V-Ribbed Belt |
| Weight | 0.125 kg |
| Length | 1405 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.74
Important compatibility info
| for OE number | 06 38 741 |
| Weight | 0.040 kg |
| Function | Gasket, cylinder head cover |
| Type | Gasket, cylinder head cover |
| Material | ACM (Polyacrylate) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.75
Important compatibility info
| Weight | 0.43 kg |
| Placement on Vehicle | Front Axle, Wheel Side |
| Length | 114 mm |
| Material | Thermoplast |
| Inner diameter 1 | 26 mm |
| Inner diameter 2 | 88 mm |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (08025)
- 1x Febi Clamping Clip (45644)
- 1x Febi Clamping Clip (38758)
- 1x Febi Nut, kingpin (08023)
- 1x Febi Spring Washer (07254)
- 1x Febi Circlip (03185)
- 1x Febi Spacer Sleeve (03385)
- 1x Febi High Temperature Lubricant (03630)
£17.75
Important compatibility info
| Weight | 0.840 kg |
| Function | Bushing, leaf spring |
| Material | Rubber/Metal |
| Length | 75 mm |
| Inner diameter | 6.5 mm |
| Type | Bushing, leaf spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.75
Important compatibility info
| Weight | 0.063 kg |
| Height | 40 mm |
| Width | 80 mm |
| Inner diameter 1 | 23 mm |
| Inner diameter 2 | 10 mm |
| Type | Hose, crankcase ventilation |
| Function | Hose, crankcase ventilation |
| Extra Description | febi Plus |
| for OE number | 06J 103 213 B |
| Hose Length | 300 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.75
Important compatibility info
| Function | Dust Cover Kit, shock absorber |
| Placement on Vehicle | Rear Axle |
| Type | Dust Cover Kit, shock absorber |
| Weight | 0.228 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| Placement on Vehicle | Front Axle |
| Weight | 0.61 kg |
| Additional Information 2 | with ball bearing, with fastening material |
| Function | Repair Kit, suspension strut support mount |
| Extra Description | ProKit |
| Type | Repair Kit, suspension strut support mount |
| for OE number | 5031.77 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (19495)
- 1x Febi Spring Seat (37165)
- 1x Febi Nut (37805)
- 1x Febi Nut (37801)
- 1x Febi Rolling Bearing, suspension strut support mount (10091)
£17.76
Important compatibility info
| Length | 1196 mm |
| Type | V-Ribbed Belt |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 7 |
| Alternator type | for starter generator |
| Tensile Cord Material | Aramid |
| Function | V-Ribbed Belt |
| Weight | 0.126 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| Function | Brake Hose |
| Placement on Vehicle | Front Axle Right |
| Length | 625 mm |
| Paired article numbers | 183698 |
| Weight | 0.125 kg |
| Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| Height | 86 mm |
| Outer diameter | 86.5 mm |
| Additional Information 2 | with seal ring |
| Spanner Size | 27 |
| Weight | 0.100 kg |
| Bolt Head/Nut Design | Male Hex |
| Tightening Torque | 25 Nm |
| Type | Cap, oil filter housing |
| Function | Cap, oil filter housing |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| Weight | 0.578 kg |
| Placement on Vehicle | both sides |
| Length | 95 mm |
| Material | Rubber/Metal |
| Outer diameter | 58 mm |
| Inner diameter | 16 mm |
| Function | Bushing, leaf spring |
| Type | Bushing, leaf spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| Weight | 0.305 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Ball Joint |
| Cone Size | 12.9 mm |
| Mounting points diameter | 10.5 mm |
| External Thread Size | M12 x 1,5 |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| Weight | 0.22 kg |
| Placement on Vehicle | Front Axle, Lower |
| Outer diameter | 110 mm |
| Inner diameter | 72 mm |
| Function | Spring Seat |
| Type | Spring Seat |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| Length | 1190 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Tensile Cord Material | Aramid |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
| Alternator type | for starter generator |
| Weight | 0.128 kg |
| Number of Ribs | 7 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| External Thread Size | M12 x 1,5 |
| Weight | 0.61 kg |
| Paired article numbers | 36875 |
| Function | Ball Joint |
| Cone Size | 20 mm |
| Extra Description | ProKit |
| Type | Ball Joint |
| Placement on Vehicle | Front Axle Right, Lower |
| Steering arm type | for control arm |
| Mounting points diameter | 17.4 mm |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023