Important compatibility info
Weight | 0.07 kg |
Placement on Vehicle | Left Front |
Paired article numbers | 101989 |
Function | Lock Cylinder |
Type | Lock Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Bore Diameter | 23.81 mm |
Fill Medium | Brake Fluid |
Weight | 0.054 kg |
Function | Repair Kit, clutch master cylinder |
Type | Repair Kit, clutch master cylinder |
for OE number | 000 290 46 67 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.312 kg |
Length | 1635 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 8 |
Function | V-Ribbed Belt |
Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Bellow Kit, drive shaft |
Type | Bellow Kit, drive shaft |
Joint Type | CV Joint |
Weight | 0.092 kg |
Inner diameter 1 | 28 mm |
Inner diameter 2 | 90 mm |
Material | Thermoplastic polyester elastomer |
Length | 97 mm |
Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Weight | 2.15 kg |
Inner diameter | 80 mm |
Length | 1 m |
Function | Corrugated Pipe, exhaust system |
Type | Corrugated Pipe, exhaust system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with grease |
Additional Information 2 | with bolts/screws, with clamps |
Placement on Vehicle | Rear Axle, transmission sided |
Material | Rubber |
Inner diameter 1 | 25 mm |
Inner diameter 2 | 63 mm |
Function | Bellow Kit, drive shaft |
Weight | 0.59 kg |
Type | Bellow Kit, drive shaft |
Length | 99 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (08405)
- 1x Febi Fastening Clamp (08406)
- 1x Febi Fastening Clamp (08408)
- 6x Febi Bolt, drive shaft flange (02592)
- 2x Febi Packing Plate, drive shaft flange (02593)
- 1x Febi Circlip (02596)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Weight | 0.080 kg |
External Thread Size | M18 x 1,5 |
Operating Mode | Mechanical |
Spanner Size | 27 |
Number of Connectors / Ports | 2 |
Type | Pressure Switch / Pressure Switch, axle load control |
Function | Pressure Switch / Pressure Switch, axle load control |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.585 kg |
Placement on Vehicle | Rear Axle, transmission sided |
Material | Rubber |
Type | Bellow Kit, drive shaft |
Function | Bellow Kit, drive shaft |
Length | 99 mm |
Inner diameter 1 | 23 mm |
Inner diameter 2 | 66 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (08478)
- 1x Febi Fastening Clamp (08406)
- 1x Febi Fastening Clamp (08408)
- 1x Febi Nut, kingpin (01841)
- 6x Febi Bolt, drive shaft flange (02592)
- 2x Febi Packing Plate, drive shaft flange (02593)
- 1x Febi Circlip (02596)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 984 mm |
Number of Connectors / Ports | 2 |
Brake Type | Disc Brake |
Function | Warning Contact, brake pad wear |
Weight | 0.05 kg |
Type | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Weight | 0.61 kg |
Additional Information 2 | with ball bearing, with fastening material |
Function | Repair Kit, suspension strut support mount |
Extra Description | ProKit |
Type | Repair Kit, suspension strut support mount |
for OE number | 5031.77 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (19495)
- 1x Febi Spring Seat (37165)
- 1x Febi Nut (37805)
- 1x Febi Nut (37801)
- 1x Febi Rolling Bearing, suspension strut support mount (10091)
Important compatibility info
Weight | 0.060 kg |
Length | 115 mm |
Width | 166 mm |
Thickness | 2 mm |
Inner diameter | 63 mm |
Function | Gasket, charge air cooler |
Type | Gasket, charge air cooler |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 1196 mm |
Type | V-Ribbed Belt |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 7 |
Alternator type | for starter generator |
Tensile Cord Material | Aramid |
Function | V-Ribbed Belt |
Weight | 0.126 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 1190 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Tensile Cord Material | Aramid |
Type | V-Ribbed Belt |
Function | V-Ribbed Belt |
Alternator type | for starter generator |
Weight | 0.128 kg |
Number of Ribs | 7 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.37 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 298 mm |
Material | Steel |
Rod/Strut | Coupling Rod |
Colour | Black |
Function | Link/Coupling Rod, stabiliser bar |
External Thread Size | M10 x 1,25 |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Diameter | 1 mm |
Spanner Size | 16 |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with seal ring |
Function | Protection Lid, wheel hub |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Thickness | 40 mm |
Width | 160 mm |
Length | 160 mm |
Weight | 0.435 kg |
Type | Protection Lid, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Protection Lid, wheel hub (35169)
- 1x Febi Seal Ring, wheel hub (35168)
Important compatibility info
Placement on Vehicle | Front and Rear |
Weight | 0.63 kg |
Type | Cover Sheet, brake drum |
Function | Cover Sheet, brake drum |
Height | 33 mm |
Outer diameter | 407 mm |
Inner diameter | 229 mm |
Paired article numbers | 196032 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Bushing, axle beam |
Material | Rubber/Metal |
Outer diameter | 41.2 mm |
Weight | 0.300 kg |
Inner diameter | 17.1 mm |
Thickness | 52.5 mm |
Function | Bushing, axle beam |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front and Rear |
Weight | 0.6 kg |
Type | Cover Sheet, brake drum |
Function | Cover Sheet, brake drum |
Height | 32 mm |
Outer diameter | 403 mm |
Inner diameter | 230 mm |
Paired article numbers | 196022 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Length | 105.5 mm |
Function | Brake Pad Set, disc brake |
Thickness/Strength 1 | 14 mm |
Width | 38 mm |
Wear Warning Contact | with acoustic wear warning |
Weight | 0.769 kg |
Inspection Tag | ECE R90 Approved |
Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber), Plastic |
Cooling Hose | from engine to water pump |
Function | Radiator Hose |
Weight | 0.264 kg |
Additional Information 2 | with quick couplers |
Type | Radiator Hose |
Hose Length | 485 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Gasket, timing case cover |
Material | PA (polyamide), Silicone |
Weight | 0.018 kg |
Type | Gasket, timing case cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.170 kg |
Joint Type | Tripod Joint |
Length | 92 mm |
Material | Thermoplast |
Inner diameter 1 | 25 mm |
Inner diameter 2 | 66 mm |
Type | Bellow Kit, drive shaft |
Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (174371)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Cone Size | 16.5 mm |
Function | Ball Joint |
Weight | 0.67 kg |
Extra Description | ProKit |
External Thread Size | M16 x 1,5 |
Type | Ball Joint |
Additional Information 2 | with crown nut |
Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.785 kg |
Width | 40 mm |
Outer diameter | 74 mm |
Inner diameter | 40 mm |
Bearing Type | Angular Ball Bearing |
Type | Wheel Bearing Kit |
Function | Wheel Bearing Kit |
Additional Information 2 | with shaft seal |
Additional Information | with Split Pin, with axle nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Filter Set, cabin air |
Filter type | Pollen Filter |
Length | 328 mm |
Height | 29.5 mm |
Width | 172 mm |
Type | Filter Set, cabin air |
Weight | 0.142 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.01 kg |
Function | Sensor, coolant level |
Number of Connectors / Ports | 2 |
Colour | Black |
Material | Plastic |
Length | 85 mm |
Type | Sensor, coolant level |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 59 mm |
Filter type | Filter Insert |
Type | Air Filter |
Weight | 0.270 kg |
Length | 221 mm |
Function | Air Filter |
Width | 188 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Length | 95 mm |
Width | 47.1 mm |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 17.3 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Weight | 0.86 kg |
Additional Information 2 | with fastening material |
Replaces | 16715 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 06241 |
Length | 120 mm |
Function | Angled Ball Joint, steering push rod |
Cone Size | 31.5 mm |
Thread Type | with left-hand thread |
External Thread Size | M30 x 1,5 LHT, M24 x 1,5 |
Weight | 1.74 kg |
Additional Information 2 | with crown nut |
Extra Description | ProKit |
Type | Angled Ball Joint, steering push rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.187 kg |
Type | Mounting Kit, charger |
Function | Mounting Kit, charger |
for OE number | 860869 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023