Proud to be a UK-based company
Contact us
Important compatibility info
| Additional Information | with counter nut |
| Weight | 0.47 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Internal Thread Size | M16 x 1,5 |
| Length | 127 mm |
| Replaces | 26255 |
| Function | Inner Tie Rod |
| Extra Description | ProKit |
| External Thread Size | M16 x 1,5 |
| Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.72
Important compatibility info
| Height | 103 mm |
| Outer diameter | 95 mm |
| Bolt Head/Nut Design | Male Hex |
| Tightening Torque | 25 Nm |
| Function | Cap, oil filter housing |
| Weight | 0.133 kg |
| Extra Description | febi Plus |
| Additional Information 2 | with seal ring |
| Type | Cap, oil filter housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.72
Important compatibility info
| Weight | 0.500 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Lower |
| Function | Ball Joint |
| Additional Information | with fastening/mounting material |
| External Thread Size | M14 x 1,5 |
| Extra Description | ProKit |
| Type | Ball Joint |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.72
Important compatibility info
| Weight | 0.080 kg |
| Placement on Vehicle | Left |
| Material | NBR (nitrile butadiene rubber) |
| Function | Gasket, cylinder head cover |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.72
Important compatibility info
| Function | Hydraulic Filter Kit, automatic transmission |
| Length | 235 mm |
| Height | 49 mm |
| Width | 156 mm |
| Additional Information 2 | with oil sump gasket |
| Weight | 0.452 kg |
| Type | Hydraulic Filter Kit, automatic transmission |
| Seal Material | NBR (nitrile butadiene rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.72
Important compatibility info
| Weight | 0.207 kg |
| Placement on Vehicle | both sides |
| Length | 349 mm |
| Housing Diameter | 18 mm |
| Eject Force | 320 N |
| Stroke | 101 mm |
| Mounting points diameter | 15 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 221.5 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.72
Important compatibility info
| Weight | 0.323 kg |
| Mounting points diameter | 18 mm |
| Housing length | 270 mm |
| Function | Gas Spring, boot/cargo area |
| Piston conrod diameter | 8 mm |
| Stroke | 146 mm |
| Eject Force | 660 N |
| Housing Diameter | 19 mm |
| Length | 499 mm |
| Placement on Vehicle | both sides |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.72
Important compatibility info
| Housing length | 244.5 mm |
| Function | Gas Spring, boot/cargo area |
| Stroke | 176 mm |
| Mounting points diameter | 16.5 mm |
| Piston conrod diameter | 8 mm |
| Eject Force | 90 N |
| Housing Diameter | 18 mm |
| Weight | 0.207 kg |
| Placement on Vehicle | both sides |
| Length | 445 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.72
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
| Cable Length | 996 mm |
| Weight | 0.06 kg |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.72
Important compatibility info
| Weight | 0.620 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 37 mm |
| Outer diameter | 75 mm |
| Inner diameter | 42 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Additional Information 2 | with retaining ring |
| for OE number | 33 41 6 762 317 S1 |
| Additional Information | with axle nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Axle Nut, drive shaft (01701)
- 1x Febi Wheel Bearing (26309)
- 1x Febi Circlip (04015)
£17.72
Important compatibility info
| Placement on Vehicle | Front Axle |
| Width | 68.5 mm |
| Outer diameter | 125 mm. 38 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Function | Wheel Hub |
| Weight | 1.46 kg |
| External Thread Size | M12 x 1,5 |
| Type | Wheel Hub |
| Additional Information 2 | with wheel studs, without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.72
Important compatibility info
| Weight | 0.8 kg |
| Placement on Vehicle | Front Axle Right, Lower |
| Paired article numbers | 28700 |
| Function | Ball Joint |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Extra Description | ProKit |
| Internal Thread Size | M12 x 1,25 |
| External Thread Size | M14 x 1,5, M12 x 1,25 |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.72
Important compatibility info
| Type | Bushing, axle beam |
| Inner diameter | 22 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Material | Rubber/Metal |
| Outer diameter | 84 mm |
| Thickness | 71 mm |
| Weight | 0.468 kg |
| Function | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.72
Important compatibility info
| Weight | 0.07 kg |
| Width | 21 mm |
| Number of Teeth | 81 |
| Function | Timing Belt |
| Type | Timing Belt |
| Belts | with trapezoidal tooth profile |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.72
Important compatibility info
| Weight | 0.550 kg |
| Placement on Vehicle | Left Rear |
| Length | 1590 mm |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.72
Important compatibility info
| Filter type | Filter Insert |
| Function | Air filter kit |
| Height | 34 mm |
| Width | 194 mm |
| Length | 273 mm |
| Type | Air filter kit |
| Weight | 0.291 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.72
Important compatibility info
| Weight | 1.279 kg |
| Placement on Vehicle | Front Axle |
| Length | 118.8 mm |
| Width | 69.5 mm |
| Wear Warning Contact | excl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 15.2 mm |
| Function | Brake Pad Set, disc brake |
| Replaces | 16046 |
| Type | Brake Pad Set, disc brake |
| Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.72
Important compatibility info
| Weight | 0.95 kg |
| Placement on Vehicle | Rear Axle |
| Width | 25 mm |
| Outer diameter | 160 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 3.3 mm |
| Function | Brake Shoe Set, parking brake |
| Type | Brake Shoe Set, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.72
Important compatibility info
| Weight | 0.209 kg |
| Placement on Vehicle | both sides |
| Length | 419 mm |
| Housing Diameter | 18 mm |
| Eject Force | 500 N |
| Stroke | 157 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, boot/cargo area |
| Function | Gas Spring, boot/cargo area |
| Housing length | 236.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.72
Important compatibility info
| Weight | 0.321 kg |
| Placement on Vehicle | both sides |
| Length | 537 mm |
| Housing Diameter | 19 mm |
| Eject Force | 585 N |
| Stroke | 208 mm |
| Mounting points diameter | 17.8 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 289 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.72
Important compatibility info
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Placement on Vehicle | both sides |
| Length | 250 mm |
| Housing Diameter | 19 mm |
| Eject Force | 660 N |
| Stroke | 78 mm |
| Housing length | 146.5 mm |
| Function | Gas Spring, bonnet |
| Type | Gas Spring, bonnet |
| Weight | 0.168 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.72
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 500 mm |
| Housing Diameter | 19 mm |
| Eject Force | 530 N |
| Stroke | 199 mm |
| Mounting points diameter | 16.5 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 276.5 mm |
| Weight | 0.301 kg |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.72
Important compatibility info
| Weight | 0.063 kg |
| Placement on Vehicle | Front Axle |
| Length | 90 mm |
| Material | PU (Polyurethane), Plastic |
| Function | Dust Cover Kit, shock absorber |
| Type | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (26179)
- 2x Febi Protective Cap/Bellow, shock absorber (32125)
£17.72
Important compatibility info
| Function | Gasket, cylinder head |
| Weight | 0.125 kg |
| Type | Gasket, cylinder head |
| for OE number | 026 103 383 P |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.72
Important compatibility info
| Weight | 0.042 kg |
| Placement on Vehicle | Lower |
| Engine Management | Timing Chain |
| for OE number | 11 31 1 726 480 |
| Function | Guide, timing chain |
| Friction Lining Material | Plastic |
| Type | Guide, timing chain |
| Material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.72
Important compatibility info
| Weight | 0.500 kg |
| Placement on Vehicle | Rear Axle, transmission sided |
| Function | Bellow Kit, drive shaft |
| Inner diameter 2 | 56 mm |
| Inner diameter 1 | 23 mm |
| Material | Rubber |
| Length | 98 mm |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (22607)
- 1x Febi Nut, kingpin (01841)
- 2x Febi Packing Plate, drive shaft flange (02593)
- 6x Febi Bolt, drive shaft flange (02592)
- 2x Febi Circlip (02596)
- 1x Febi Clamping Clip (38759)
- 1x Febi Clamping Clip (45640)
- 1x Febi Molybdenum Grease (02582)
£17.72
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 248 mm |
| Weight | 0.550 kg |
| Function | Inner Tie Rod |
| External Thread Size | M16 x 1,5, M14 x 1,5 |
| Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.73
Important compatibility info
| Additional Information | with axle nut |
| Function | Wheel Bearing Kit |
| Inner diameter | 39 mm |
| Outer diameter | 74 mm |
| Width | 39 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Weight | 0.79 kg |
| Additional Information 2 | with integrated magnetic sensor ring, with retaining ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Circlip (04015)
- 1x Febi Nut, kingpin (22953)
£17.73
Important compatibility info
| Weight | 1.116 kg |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 1844.82 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.73
Important compatibility info
| Weight | 0.287 kg |
| Placement on Vehicle | Rear Axle, Wheel Side |
| Length | 96 mm |
| Material | Thermoplast |
| Inner diameter 1 | 29 mm |
| Inner diameter 2 | 87 mm |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (44714)
- 1x Febi Molybdenum Grease (02582)
- 1x Febi Circlip (09454)
- 1x Febi Clamping Clip (45644)
- 1x Febi Clamping Clip (38758)
£17.74
Important compatibility info
| Function | V-Ribbed Belt |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 6 |
| Type | V-Ribbed Belt |
| Weight | 0.125 kg |
| Length | 1405 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.74
Important compatibility info
| Weight | 0.063 kg |
| Height | 40 mm |
| Width | 80 mm |
| Inner diameter 1 | 23 mm |
| Inner diameter 2 | 10 mm |
| Type | Hose, crankcase ventilation |
| Function | Hose, crankcase ventilation |
| Extra Description | febi Plus |
| for OE number | 06J 103 213 B |
| Hose Length | 300 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.75
Important compatibility info
| Weight | 0.43 kg |
| Placement on Vehicle | Front Axle, Wheel Side |
| Length | 114 mm |
| Material | Thermoplast |
| Inner diameter 1 | 26 mm |
| Inner diameter 2 | 88 mm |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (08025)
- 1x Febi Clamping Clip (45644)
- 1x Febi Clamping Clip (38758)
- 1x Febi Nut, kingpin (08023)
- 1x Febi Spring Washer (07254)
- 1x Febi Circlip (03185)
- 1x Febi Spacer Sleeve (03385)
- 1x Febi High Temperature Lubricant (03630)
£17.75
Important compatibility info
| External Thread Size | M12 x 1,5 |
| Weight | 0.363 kg |
| Placement on Vehicle | Front Axle Left, Upper, Front Axle Right |
| Cone Size | 14.5 mm |
| Function | Ball Joint |
| Mounting points diameter | 8.5 mm |
| Type | Ball Joint |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.75
Important compatibility info
| Extra Description | ProKit |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 338 mm |
| Internal Thread Size | M14 x 1,5 |
| Function | Inner Tie Rod |
| Type | Inner Tie Rod |
| Weight | 0.68 kg |
| Additional Information | with counter nut |
| External Thread Size | M14 x 1,5 |
| Replaces | 44722 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.75
Important compatibility info
| Weight | 0.020 kg |
| Colour | Blue |
| Number of Connectors / Ports | 4 |
| Function | Temperature Switch, radiator fan |
| Type | Temperature Switch, radiator fan |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.75
Important compatibility info
| Length | 1190 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Tensile Cord Material | Aramid |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
| Alternator type | for starter generator |
| Weight | 0.128 kg |
| Number of Ribs | 7 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| Length | 1196 mm |
| Type | V-Ribbed Belt |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 7 |
| Alternator type | for starter generator |
| Tensile Cord Material | Aramid |
| Function | V-Ribbed Belt |
| Weight | 0.126 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| Weight | 0.295 kg |
| Outer diameter | 175 mm |
| Thickness | 27 mm |
| Function | Gasket Set, external planetary gearbox |
| Type | Gasket Set, external planetary gearbox |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Shaft Seal, wheel hub (05352)
- 1x Febi Shaft Seal, wheel hub (05354)
- 1x Febi Seal Ring, wheel hub (08008)
£17.76
Important compatibility info
| Bore Diameter | 23.81 mm |
| Fill Medium | Brake Fluid |
| Weight | 0.054 kg |
| Function | Repair Kit, clutch master cylinder |
| Type | Repair Kit, clutch master cylinder |
| for OE number | 000 290 46 67 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| Placement on Vehicle | Lower Right |
| Outer diameter | 25 mm |
| Function | Roller Guide, sliding door |
| Weight | 0.372 kg |
| Extra Description | febi Plus |
| Type | Roller Guide, sliding door |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| Weight | 0.060 kg |
| Length | 115 mm |
| Width | 166 mm |
| Thickness | 2 mm |
| Inner diameter | 63 mm |
| Function | Gasket, charge air cooler |
| Type | Gasket, charge air cooler |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| Length | 315 mm |
| Height | 55 mm |
| Width | 195 mm |
| Filter type | Activated Carbon Filter |
| Function | Filter, cabin air |
| Type | Filter, cabin air |
| Weight | 0.280 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| Weight | 0.250 kg |
| Screw length below head | 17 mm |
| Function | Thrust Roller, release fork |
| Outer diameter | 30 mm |
| Height | 39 mm |
| Type | Thrust Roller, release fork |
| Inner diameter | 16 mm |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| Weight | 0.07 kg |
| Placement on Vehicle | Left Front |
| Paired article numbers | 101989 |
| Function | Lock Cylinder |
| Type | Lock Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| Placement on Vehicle | Front Axle |
| Width | 84 mm |
| Function | Mounting, stabiliser bar |
| Thickness | 68.9 mm |
| Inner diameter | 36.8 mm |
| Type | Mounting, stabiliser bar |
| Weight | 0.414 kg |
| Material | Rubber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| External Thread Size | M12 x 1,5 |
| Weight | 0.61 kg |
| Paired article numbers | 36875 |
| Function | Ball Joint |
| Cone Size | 20 mm |
| Extra Description | ProKit |
| Type | Ball Joint |
| Placement on Vehicle | Front Axle Right, Lower |
| Steering arm type | for control arm |
| Mounting points diameter | 17.4 mm |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| Weight | 0.080 kg |
| External Thread Size | M18 x 1,5 |
| Operating Mode | Mechanical |
| Spanner Size | 27 |
| Number of Connectors / Ports | 2 |
| Type | Pressure Switch / Pressure Switch, axle load control |
| Function | Pressure Switch / Pressure Switch, axle load control |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 8 |
| Weight | 0.92 kg |
| Length | 1766 mm |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| Material | Plastic |
| Outer diameter | 135 mm |
| Inner diameter | 30 mm |
| Weight | 0.210 kg |
| Thickness | 18 mm |
| Function | Belt Pulley, power steering pump |
| Extra Description | febi Plus |
| Type | Belt Pulley, power steering pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023