Proud to be a UK-based company
Contact us
Important compatibility info
| Width | 30 mm |
| Weight | 1.290 kg |
| Number of Teeth | 152 |
| Belts | with trapezoidal tooth profile |
| Function | Timing Belt Kit |
| Type | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (11008)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (11904)
- 1x Febi Tensioner Pulley, timing belt (29389)
£67.86
Important compatibility info
| Width | 18 mm |
| Weight | 0.08 kg |
| Placement on Vehicle | Rear Axle |
| Material | PU (Polyurethane) |
| Inner diameter | 14 mm |
| Function | Rubber Buffer, suspension |
| Type | Rubber Buffer, suspension |
| Length | 106 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£9.84
Important compatibility info
| Height | 15 mm |
| Inner diameter | 31 mm |
| Bearing Type | Thrust Bearing |
| Type | Bush, steering knuckle |
| Function | Bush, steering knuckle |
| Outer diameter | 48 mm |
| Weight | 0.071 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.76
Important compatibility info
| Additional Information | with gasket/seal |
| Type | Coolant Flange |
| for OE number | 11 11 8 511 205 |
| Weight | 0.06 kg |
| Function | Coolant Flange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.31
Important compatibility info
| Weight | 0.16 kg |
| Number of Connectors / Ports | 4 |
| Inner diameter | 63 mm |
| Housing Type | with housing |
| Function | Mass Air Flow Sensor |
| Additional Information 2 | Control Unit/Software must be trained/updated |
| Outer diameter | 70 mm |
| Material | Plastic |
| Type | Mass Air Flow Sensor |
| Resistor Type | Hot-wire Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.39
Important compatibility info
| Weight | 0.316 kg |
| Placement on Vehicle | Rear Axle |
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (37323)
- 2x Febi Protective Cap/Bellow, shock absorber (186508)
£21.52
Important compatibility info
| Weight | 2.385 kg |
| Piston Diameter | 22 mm |
| Placement on Vehicle | Rear Axle |
| Width | 32 mm |
| Inspection Tag | ECE R90 Approved |
| Mounting Type | Pre-assembled |
| Inner Brake Drum Diameter | 200 mm |
| Function | Brake Shoe Set |
| Type | Brake Shoe Set |
| Additional Information | with wheel brake cylinder, with accessories, with fastening/mounting material |
| Outer diameter | 202.52 mm |
| Thickness/Strength 1 | 6.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Paired article numbers | 06641 |
| Placement on Vehicle | Front Axle Left |
| Thread Type | with right-hand thread |
| Function | Tie Rod End |
| Weight | 0.580 kg |
| Type | Tie Rod End |
| Internal Thread Size | M14 x 1,5 |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Weight | 16.78 kg |
| Placement on Vehicle | Front Axle |
| Length | 1700 mm |
| Rod/Strut | Guide Rod |
| Cone Size | 32 mm |
| Pipe Diameter | 52 mm |
| External Thread Size | M27 x 1,5 |
| Internal Thread Size | M30 x 1,5 |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£138.34
Important compatibility info
| Function | Seal Kit, multi-valve |
| Type | Seal Kit, multi-valve |
| Weight | 3.4 kg |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£186.85
Important compatibility info
| Width | 146 mm |
| Length | 180 mm |
| Placement on Vehicle | Rear |
| Weight | 0.935 kg |
| Thickness | 74 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, automatic transmission |
| Type | Mounting, automatic transmission |
| Replaces | 29331 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.18
Important compatibility info
| Function | Bellow Kit, steering |
| Type | Bellow Kit, steering |
| Weight | 0.073 kg |
| Inner diameter 1 | 16 mm |
| Inner diameter 2 | 52 mm |
| Material | Thermoplast |
| Length | 205 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Additional Information 2 | with clamps |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.82
Important compatibility info
| Placement on Vehicle | Front Axle, Lower |
| Length | 44 mm |
| Width | 33 mm |
| Material | Rubber |
| Thickness | 23.5 mm |
| Weight | 0.035 kg |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£8.01
Important compatibility info
| Weight | 0.11 kg |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
| Number of Ribs | 6 |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Length | 963 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£9.90
Important compatibility info
| Weight | 0.800 kg |
| Type | Repair Kit, driver cab suspension |
| Function | Repair Kit, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.30
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Function | Brake Disc |
| Surface | Coated |
| Brake Disc Thickness | 23 mm |
| Outer diameter | 282 mm |
| Placement on Vehicle | Front Axle |
| Number of mounting bores | 2 |
| Minimum thickness | 21 mm |
| Weight | 6.36 kg |
| Centering Diameter | 64 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Thickness | 47.2 mm |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.87
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 412 mm |
| Additional Information | with counter nut |
| Outer diameter | 40 mm |
| Spanner Size | 38, 15 |
| Weight | 0.921 kg |
| Type | Inner Tie Rod |
| Function | Inner Tie Rod |
| External Thread Size | M16 x 1,5 |
Additional Information
Technical Information
After replacement, the optical driver assistance systems (cameras, radar, etc.) may need to be recalibrated. Please observe the manufacturer's instructions.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.50
Important compatibility info
| Eject Force | 380 N |
| Stroke | 271 mm |
| Placement on Vehicle | Right |
| Mounting points diameter | 18 mm |
| Function | Gas Spring, bonnet |
| Housing length | 390.5 mm |
| Type | Gas Spring, bonnet |
| Piston conrod diameter | 8 mm |
| Weight | 0.324 kg |
| Housing Diameter | 18 mm |
| Length | 693 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.04
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 110 mm |
| Material | Steel |
| Spanner Size | 19 |
| Rod/Strut | Coupling Rod |
| Colour | Black |
| Thread Length | 22 mm |
| Pipe Diameter | 9 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M12 x 1,25 |
| Weight | 0.3 kg |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.58
Important compatibility info
| Weight | 0.212 kg |
| Function | Holder, air conditioning compressor |
| Extra Description | febi Plus |
| Type | Holder, air conditioning compressor |
| Length | 250 mm |
| Height | 57 mm |
| Width | 114 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.88
Important compatibility info
| Paired article numbers | 42227 |
| Function | Tie Rod End |
| Weight | 0.8 kg |
| Placement on Vehicle | Front Axle Left |
| Length | 224 mm |
| Thickness | 74 mm |
| Spanner Size | 19 |
| Internal Thread Size | M14 x 1,5 |
| External Thread Size | M12 x 1,25 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.13
Important compatibility info
| Inner diameter | 17 mm |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle |
| Function | Suspension Strut Support Mount |
| Weight | 0.43 kg |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.51
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 130 |
| Weight | 1.464 kg |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Timing Chain Size | G53HP, G53HR, G53AM, G53HC |
| Replaces | 33040; 33083 |
| Additional Information | with slide rails, with chain tensioner |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (17617)
- 1x Febi Tensioner, timing chain (12119)
- 1x Febi Gear Set, engine timing (33033)
- 1x Febi Guide Rails Kit, timing chain (46414)
- 1x Febi Screw Set, gears (timing chain) (46415)
- 1x Febi Sleeve (46469)
- 1x Febi Gasket Kit, crankcase (46470)
£119.43
Important compatibility info
| Placement on Vehicle | Right |
| Material | Plastic |
| Function | Door Handle, interior equipment |
| Weight | 0.053 kg |
| Paired article numbers | 40044 |
| Colour | Black |
| Type | Door Handle, interior equipment |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.82
Important compatibility info
| Function | Radiator Hose |
| Cooling Hose | from expansion tank to water pipe |
| Weight | 0.085 kg |
| Type | Radiator Hose |
| Placement on Vehicle | Upper Left |
| Hose Length | 315 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.89
Important compatibility info
| for OE number | 8T0 498 203 SK1 |
| Placement on Vehicle | Front Axle, Wheel Side |
| Length | 122 mm |
| Material | Thermoplast |
| Inner diameter 2 | 83 mm |
| Function | Bellow Kit, drive shaft |
| Weight | 0.50 kg |
| Type | Bellow Kit, drive shaft |
| Inner diameter 1 | 25 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (29247)
- 1x Febi Clamping Clip (38757)
- 1x Febi Clamping Clip (45643)
- 1x Febi Circlip (29249)
- 1x Febi Screw (31324)
- 1x Febi High Temperature Lubricant (03630)
£20.15
Important compatibility info
| Placement on Vehicle | Right |
| Weight | 3.043 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£145.98
Important compatibility info
| Paired article numbers | 178539 |
| Weight | 0.583 kg |
| Cone Size | 18 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with rubber mount, with ball joint |
| Material | Aluminium |
| Placement on Vehicle | Front Axle Left, Front, Upper |
| Steering arm type | Control Arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.31
Important compatibility info
| Weight | 0.04 kg |
| Length | 40 mm |
| Number of Connectors / Ports | 2 |
| Function | Sensor, crankshaft pulse |
| Type | Sensor, crankshaft pulse |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.00
Important compatibility info
| Material | Rubber |
| Function | Gasket, intake manifold |
| Weight | 0.025 kg |
| Type | Gasket, intake manifold |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£9.62
Important compatibility info
| Weight | 0.075 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 1415 mm |
| Number of Connectors / Ports | 2 |
| Resistance | 1200 Ohm |
| Cable Length | 1325 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
| Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.43
Important compatibility info
| Additional Information 2 | with screw set |
| Additional Information | with nuts |
| Placement on Vehicle | Rear |
| Weight | 2.221 kg |
| Type | Repair Kit, driver cab suspension |
| Function | Repair Kit, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.92
Important compatibility info
| Length | 55 mm |
| Width | 41 mm |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle Left, Lower, Front, Front Axle Right |
| Outer diameter | 30.4 mm |
| Thickness | 55 mm |
| Inner diameter | 12 mm |
| Function | Mounting, control/trailing arm |
| Weight | 0.13 kg |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£7.75
Important compatibility info
| Weight | 0.125 kg |
| Material | Metal |
| Thickness | 1.3 mm |
| Function | Gasket, cylinder head |
| Type | Gasket, cylinder head |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.11
Important compatibility info
| Width | 201 mm |
| Filter type | Activated Carbon Filter |
| Length | 303 mm |
| Type | Filter, cabin air |
| Function | Filter, cabin air |
| Height | 32 mm |
| Weight | 0.281 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£8.90
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Bore Diameter | 12 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Telescopic Shock Absorber |
| Weight | 1.650 kg |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Mounting bores distance | 511 mm |
| Max. Length | 511 mm |
| Min. Length | 325 mm |
| Pipe Diameter | 53 mm. 45 mm |
| Piston conrod diameter | 12.5 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.92
Important compatibility info
| Length | 252 mm |
| Height | 32 mm |
| Width | 235 mm |
| Filter type | Pollen Filter |
| Type | Filter, cabin air |
| Function | Filter, cabin air |
| Weight | 0.1036 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£8.09
Important compatibility info
| Parameter | Typ 44 |
| Internal Thread Size | M22 x 1,5 |
| Type | Diaphragm Brake Cylinder |
| Function | Diaphragm Brake Cylinder |
| Distance of fastening bolts | 120 mm |
| Piston Rod Thread | M20 x 1,5 |
| Weight | 8.7 kg |
| Stroke | 95 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.58
Important compatibility info
| Thickness | 108 mm |
| Inner diameter | 15 mm. 17 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Rear Axle Left, Rear, Rear Axle Right |
| Material | Rubber/Metal |
| Outer diameter | 89 mm. 105 mm |
| Weight | 0.81 kg |
| Function | Bushing, axle beam |
| Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.99
Important compatibility info
| Weight | 0.07 kg |
| Inner diameter | 25 mm |
| Type | Gasket, EGR valve |
| Function | Gasket, EGR valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£7.06
Important compatibility info
| Number of Connectors / Ports | 6 |
| Function | Sensor, headlight levelling |
| Weight | 0.05 kg |
| Material | Plastic |
| Type | Sensor, headlight levelling |
| Voltage | 5 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.11
Important compatibility info
| Function | Air Filter |
| Height | 472 mm |
| Outer diameter | 172 mm |
| Inner diameter | 134 mm |
| Filter type | Filter Insert |
| Weight | 0.350 kg |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.08
Important compatibility info
| Placement on Vehicle | Front Axle |
| Width | 102 mm |
| Outer diameter | 168 mm |
| Additional Information 2 | with ABS sensor ring |
| Inner diameter | 60 mm |
| Bolt Hole Circle Diameter | 144 mm |
| Weight | 8.105 kg |
| Bearing Type | Tapered Roller Bearing |
| Type | Wheel Hub |
| Function | Wheel Hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£164.08
Important compatibility info
| Length | 194 mm |
| Height | 23 mm |
| Width | 190 mm |
| Filter type | Pollen Filter |
| Weight | 0.06 kg |
| Type | Filter, cabin air |
| Function | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.32
Important compatibility info
| Weight | 0.070 kg |
| Placement on Vehicle | Front Axle |
| Material | Rubber/Metal |
| Outer diameter | 58.5 mm. 24 mm |
| Inner diameter | 16.3 mm |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.97
Important compatibility info
| Outer diameter | 55 mm |
| Filter type | In-Line Filter |
| Type | Fuel filter |
| Function | Fuel filter |
| Height | 256 mm |
| Weight | 0.214 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.71
Important compatibility info
| Colour | Silver |
| Rod/Strut | Coupling Rod |
| Paired article numbers | 27988 |
| Material | Steel |
| Length | 65 mm |
| Placement on Vehicle | Front Axle Left |
| Weight | 0.18 kg |
| Additional Information | with nuts |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Spanner Size | 19 |
| External Thread Size | M12 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.70
Important compatibility info
| Weight | 0.271 kg |
| Placement on Vehicle | both sides |
| Length | 556 mm |
| Housing Diameter | 18 mm |
| Eject Force | 450 N |
| Stroke | 224 mm |
| Mounting points diameter | 17.8 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 302.5 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.55
Important compatibility info
| Weight | 0.060 kg |
| Length | 100 mm |
| Material | Thermoplast |
| Inner diameter 1 | 27 mm |
| Inner diameter 2 | 78 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (102061)
- 1x Febi Clamping Clip (27100)
- 1x Febi Clamping Clip (45642)
- 1x Febi High Temperature Lubricant (03630)
£16.04
Important compatibility info
| Weight | 0.060 kg |
| Function | Hose, air supply |
| Extra Description | febi Plus |
| Additional Information 2 | with quick couplers |
| Type | Hose, air supply |
| Inner diameter | 18 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.82
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023