Proud to be a UK-based company
Contact us
Important compatibility info
| Function | Gasket, timing case |
| Material | Steel, NBR (nitrile butadiene rubber) |
| Weight | 0.016 kg |
| Type | Gasket, timing case |
| Thickness | 0.7 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.75
Important compatibility info
| Housing length | 356.5 mm |
| Weight | 0.415 kg |
| Placement on Vehicle | both sides |
| Length | 641 mm |
| Eject Force | 510 N |
| Stroke | 265 mm |
| Housing Diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
| Mounting points diameter | 18 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.75
Important compatibility info
| Length | 904 mm |
| Function | Drive Arm, wiper linkage |
| Type | Drive Arm, wiper linkage |
| Weight | 0.610 kg |
| Hole Spacing | 835 mm. 870 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.75
Important compatibility info
| Width | 220 mm |
| Function | Gasket, cylinder head cover |
| Thickness | 3.5 mm |
| Material | ACM (Polyacrylate) |
| Length | 360 mm |
| Weight | 0.02 kg |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.75
Important compatibility info
| Weight | 0.195 kg |
| Height | 80 mm |
| Outer diameter | 124 mm |
| Spanner Size | 34 |
| Bolt Head/Nut Design | Male Hex |
| Tightening Torque | 25 Nm |
| Type | Cover, fuel filter |
| Function | Cover, fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.75
Important compatibility info
| Outer diameter | 175 mm |
| Thickness | 2.6 mm |
| Inner diameter | 136 mm |
| Function | Pressure Disc, leaf spring |
| Weight | 0.165 kg |
| Type | Pressure Disc, leaf spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.75
Important compatibility info
| Inner diameter 2 | 72 mm |
| Joint Type | Tripod Joint |
| Weight | 0.221 kg |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
| Inner diameter 1 | 26 mm |
| Material | NBR (nitrile butadiene rubber) |
| Length | 91 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (176426)
- 1x Febi Molybdenum Grease (02582)
£18.75
Important compatibility info
| Length | 1345 mm |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
| Alternator type | for starter generator |
| Tensile Cord Material | Aramid |
| Number of Ribs | 6 |
| Weight | 0.120 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.75
Important compatibility info
| Number of Ribs | 6 |
| Length | 1231 mm |
| Weight | 0.107 kg |
| Alternator type | for starter generator |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
| Tensile Cord Material | Aramid |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.75
Important compatibility info
| Placement on Vehicle | Rear Axle Right, Rear Axle Left |
| Length | 640 mm |
| Number of Connectors / Ports | 2 |
| Brake Type | Disc Brake |
| Function | Warning Contact, brake pad wear |
| Type | Warning Contact, brake pad wear |
| Weight | 0.03 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.75
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023