Proud to be a UK-based company
Contact us
Important compatibility info
| Function | Gasket, cylinder head cover |
| Material | NBR (nitrile butadiene rubber) |
| Weight | 0.06 kg |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Length | 119 mm |
| Placement on Vehicle | Front Axle |
| Height | 35 mm |
| Width | 120 mm |
| Material | Rubber/Metal |
| Additional Information 2 | without ball bearing |
| Weight | 0.54 kg |
| Type | Suspension Strut Support Mount |
| Function | Suspension Strut Support Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Type | Fuel filter |
| Filter type | In-Line Filter, with water separator |
| Length | 187 mm |
| Outer diameter | 80 mm |
| Weight | 0.457 kg |
| Function | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Placement on Vehicle | Left |
| Function | Gasket, cylinder head cover |
| Material | ACM (Polyacrylate) |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Mounting points diameter | 12.1 mm |
| Function | Ball Joint |
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Cone Size | 17.5 mm |
| Weight | 0.87 kg |
| External Thread Size | M14 x 1,5, M12 x 1,25 |
| Type | Ball Joint |
| Additional Information 2 | with crown nut |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Material | Thermoplastic polyester elastomer |
| Joint Type | Tripod Joint |
| Length | 108 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
| Placement on Vehicle | transmission sided, Front Axle Left, Front Axle Right |
| Weight | 0.192 kg |
| Inner diameter 2 | 71 mm |
| Inner diameter 1 | 27 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (183168)
- 1x Febi Molybdenum Grease (02582)
£19.26
Important compatibility info
| Weight | 0.33 kg |
| Placement on Vehicle | Front Axle |
| Material | Rubber/Metal |
| Outer diameter | 111 mm |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Height | 58 mm |
| Additional Information 2 | without ball bearing |
| Inner diameter | 10 mm. 23 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Function | Mounting, control/trailing arm |
| Thickness | 71 mm |
| Inner diameter | 14.5 mm |
| Weight | 0.4 kg |
| Placement on Vehicle | Lower, Front Axle Left, Front Axle Right |
| Material | Rubber/Metal |
| Width | 56 mm |
| Length | 56.15 mm |
| Outer diameter | 56.2 mm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| External Thread Size | M10 x 1,5 |
| Weight | 0.475 kg |
| Function | Mounting, manual transmission |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Thickness | 90 mm |
| Material | Rubber/Metal |
| Width | 55 mm |
| Placement on Vehicle | Left |
| Type | Mounting, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Function | Ball Joint |
| Weight | 0.43 kg |
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Cone Size | 17.2 mm |
| External Thread Size | M14 x 1,5 |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Function | Gasket, cylinder head |
| Weight | 0.125 kg |
| Type | Gasket, cylinder head |
| for OE number | 026 103 383 P |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Weight | 0.665 kg |
| Placement on Vehicle | Left Rear, Right Rear |
| Length | 2170 mm. 2185 mm |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Weight | 0.025 kg |
| Colour | Grey |
| Number of Connectors / Ports | 3 |
| Function | Sensor, coolant temperature |
| Type | Sensor, coolant temperature |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Additional Information 2 | without ball bearing, with fastening material |
| Material | Rubber/Metal |
| Function | Suspension Strut Support Mount |
| Weight | 0.560 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Suspension Strut Support Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Weight | 0.07 kg |
| Material | Metal |
| Type | Gasket, oil sump |
| Function | Gasket, oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Paired article numbers | 104173 |
| Number of Connectors / Ports | 2 |
| Resistance | 1700 Ohm |
| Cable Length | 1365 mm |
| Function | Sensor, wheel speed |
| Weight | 0.140 kg |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Weight | 0.9 kg |
| Thickness/Strength 1 | 16.5 mm |
| Function | Brake Pad Set, disc brake |
| Inspection Tag | ECE R90 Approved |
| Width | 50 mm |
| Length | 90 mm |
| Placement on Vehicle | Rear Axle |
| Replaces | 116103 |
| Type | Brake Pad Set, disc brake |
| Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Length | 107 mm |
| Bolt Head/Nut Design | Male Torx |
| Quality/ Grade | 12.9 |
| Weight | 0.81 kg |
| Number of screws | 14 |
| Function | Cylinder Head Bolt Set |
| Screw length below head | 95 mm |
| Type | Cylinder Head Bolt Set |
| External Thread Size | M10 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 14x Febi Cylinder Head Bolt (04083)
£19.26
Important compatibility info
| Weight | 0.72 kg |
| Placement on Vehicle | Left Rear |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Weight | 0.685 kg |
| Placement on Vehicle | Front Axle Right |
| Length | 195 mm |
| Spanner Size | 15 |
| Function | Tie Rod End |
| Additional Information | with lock nut |
| Paired article numbers | 109581 |
| External Thread Size | M14 x 1,5 |
| Internal Thread Size | M14 x 1,5 |
| Type | Tie Rod End |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Weight | 0.086 kg |
| Width | 20 mm |
| Number of Teeth | 91 |
| Belts | with trapezoidal tooth profile |
| Function | Timing Belt |
| Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Weight | 0.051 kg |
| Material | Aluminium, ACM (Polyacrylate) |
| Function | Gasket, oil cooler |
| Type | Gasket, oil cooler |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Weight | 0.39 kg |
| Pipe Diameter | 14 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 204 mm |
| Material | Steel |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M10 x 1,25 |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Weight | 0.41 kg |
| Extra Description | ProKit |
| Height | 135 mm |
| Width | 115 mm |
| Rated Power | 27 W |
| Light Design | LED |
| Mounting Type | Fully assembled |
| Cable Length | 1500 mm |
| Depth | 36 mm |
| Voltage from | 9 V |
| Light Distribution | Long-range illumination |
| Voltage to | 32 V |
| Protection Type (IP Code) | IP6K9K |
| Fulfils ECE norm | R10 |
| Lumen | 2200 lm |
| Temperature range from | -40 °C |
| Temperature range to | 60 °C |
| Function | Worklight |
| Inspection Tag | EMC |
| Housing material | Aluminium |
| Type | Worklight |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Weight | 0.1 kg |
| Opening Temperature | 84 °C |
| Function | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Width | 33 mm |
| Outer diameter | 72 mm |
| Inner diameter | 35 mm |
| Weight | 0.65 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information 2 | with retaining ring |
| Additional Information | with axle nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Nut, kingpin (03810)
- 1x Febi Circlip (06312)
£19.26
Important compatibility info
| Weight | 0.401 kg |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle |
| Additional Information 2 | with ball bearing |
| Type | Repair Kit, suspension strut support mount |
| Function | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (09496)
- 1x Febi Rolling Bearing, suspension strut support mount (12448)
£19.26
Important compatibility info
| Weight | 0.500 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 160 mm |
| Additional Information | with counter nut |
| Function | Inner Tie Rod |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
| External Thread Size | M16 x 1,5 |
| Replaces | 39501 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Weight | 0.041 kg |
| Cable Length | 445 mm |
| Function | Sensor, wheel speed |
| Placement on Vehicle | Rear Axle Right |
| Paired article numbers | 106716 |
| Number of Connectors / Ports | 2 |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Wear Warning Contact | excl. wear warning contact |
| Weight | 1.970 kg |
| Placement on Vehicle | Front Axle |
| Length | 156.3 mm. 155.2 mm |
| Width | 67.2 mm. 62.5 mm |
| Inspection Tag | ECE R90 Approved |
| Function | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 17.8 mm |
| Type | Brake Pad Set, disc brake |
| Manufacturer | FORD MAZDA VOLVO |
| Replaces | 16871 |
| Additional Information 2 | with piston clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023